Kent · England
Culmers Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homeowners, landlords and businesses in Culmers. Fully insured, ARBOMaster approved and guaranteed for a year.
- Cracked grout along the bath or tray
- Shower grout that has worn away
- Old grout in a dated colour
Common problems we fix in Culmers
Most grout is porous, so water, soap and grime soak into it. Given time, it discolours and begins to break down, especially in a shower that is used every day.
Most people get in touch when they notice something like this:
- Floor grout that has worn and darkened
- A grout colour that no longer suits the room
- Grout stained black or orange that won’t clean
- Grout washed out of a shower
In the older streets around Church of All Saints, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Before you book anyone
- What the quote includes, VAT included or not
- How the surfaces are prepared before sealing
- Whether you can choose the colour
- What the cure time is
How we handle regrouting in Culmers
Across Culmers, we regrout tiled showers, bathrooms and kitchens. Out comes the old grout, the joints are cleaned and new grout goes in, finished with new silicone at the edges. If you have crumbling grout between the tiles and floor grout that has worn and darkened, we can put it right.
Being in a small place like Culmers makes no difference to the job itself: it just means planning the journey and access beforehand. Once we are there, the bathroom or kitchen gets the same care as anywhere else.
All of our work is guaranteed for twelve months, and the guarantee is the same wherever you are.
- Location
- Culmers (ME13)
- Wider area
- Kent
- Cover
- A year, on every job
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What regrouting looks like in Culmers
Culmers is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, which wears sealant and grout out faster than in a quiet home. Most of the South East has hard water, so limescale builds up on sealant, grout and fittings.
Letting a property close to Faversham station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again. Schools such as Graveney Primary School are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes.
Culmers is about 2 miles east of Faversham, in Kent. Our applicators cover regrouting for homeowners, landlords and businesses in Culmers. Our area takes in 922 places across Kent, from the larger towns to small villages. Chelmsford is on our list too, about 35 miles from Culmers.
All of ME13 is within our area for regrouting, from the main roads to the quietest streets. Close by, we work in Graveney (1 mile north-east), Goodnestone (1 mile south-west), Broom Street (1 mile north-west), Slutshole (1 mile south-east) and Hernhill (1 mile south-east). We also work in nearby towns such as Ashford (13 miles south), Canterbury (7 miles south-east), Sittingbourne (9 miles west), Whitstable (4 miles north-east), Herne Bay (9 miles east) and Minster (9 miles north-west).
Around Culmers
Locally, jobs take us to homes and businesses close to Queen Elizabeth's Grammar School and Mount Ephraim Gardens. The nearest railway station is Faversham station, about 2.2 miles west of the centre. A little further out are Whitstable and Tankerton Hospital (5.5 miles north-east). For a walk, there’s Blean Woods RSPB Reserve.
Nearby places to Culmers
Other services in Culmers
Landlord and commercial work in Culmers
Mouldy or split sealant often shows up at the end of a tenancy, and it’s quick to put right between tenancies. Several properties can go on one quote.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Looking after it afterwards
No joint lasts for ever, but care makes a real difference. Our tips:
- Wipe water off the walls when you are done
- Clean with a soft brush, not anything metal
- Open a window or run the fan to clear steam
- Rinse soap off the tiles after each shower
If a tile starts to feel loose, get it looked at early. A loose tile cracks the grout around it and lets water in.
Once grout cracks, it tends to get worse. Water gets behind the tiles, and they can begin to come away, so regrouting early can save a retile.
How we quote for regrouting
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Working hours on commercial sites
- The amount of work
- Which sealant suits the joint
- The old material and how stubborn it is
Homes and businesses are quoted the same way: the amount of work, the access and the products needed, plus any working-time requirements on site. Ask us for a quote and we’ll explain what it covers.
Helping us quote
What to tell us when you ask for a quote:
- If someone has resealed it before
- The type of property
- The address or postcode of the job
- Roughly how big the job is
We quote each job on its own, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job, and photos are welcome.
How the visit works
The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours, or longer for a fully tiled room. Somewhere like Culmers needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We agree the area to be regrouted and point out any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
Getting ready for the visit
- Keep children and pets away from the work area
- Move anything stored near the joints
- Mention any sign-in or site rules at work premises
Ask for a quote
Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we will take it from there.
Read more
What happens if it’s left?
New grout smeared over the old doesn’t bond well. It sits thinly on top and soon flakes away, taking any repair with it. Removing the old grout to an even depth lets the new grout key in properly. Where a wall is exposed, as many are in small places like Culmers, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Combining jobs into one visit is normally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why choose Mr Mastic in Culmers
- Any old sealant cut out fully, not covered over
- Homes, businesses and hotels
- Quality sealants from Arbo and Everbuild
- Every job guaranteed for a year
See what affects the cost and our reviews.
Culmers questions
Is Culmers within the area you cover?
Yes, Culmers is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
I let a flat near Faversham station. Can you help?
Yes, landlords and agents are among the people we work for. You can phone 0345 464 0079 or send us an email with the details for a clear quote.
Are you fully insured?
Yes. Mr Mastic is fully insured.
How soon can the shower be used after regrouting?
Before we leave, we will tell you how long to wait. The grout and sealant both need to cure before the shower is used.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Where do you work from?
We work from Crawley. Our applicators cover Culmers, along with the rest of our area.
Will there be a smell?
Some sealants have a smell while they cure, which fades as it sets. Ventilation helps.
Do you hold any approvals?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.