Aberdeenshire · Scotland
Collieston Regrouting
Raking out old, cracked or stained grout and regrouting tiled walls and floors for homes and businesses in Collieston and across Aberdeenshire. Fully insured, ARBOMaster approved and guaranteed for a year.
- Gaps where the shower grout has gone
- Kitchen splashback grout stained by grease
- Floor grout that won’t come clean
What regrouting looks like in Collieston
Collieston is within about 1 mile of the coast. Coastal homes, holiday lets and guest houses can see heavy bathroom use in busy months, which wears sealant and grout out faster than in a quiet home. Private landlords in Scotland must be registered and meet the Repairing Standard, which includes keeping fixtures and fittings in reasonable repair. Tired, leaking sealant is worth putting right before a new tenant moves in.
For an older house near a landmark such as Parish Church of Slains, timber floors under older bathrooms flex, so joints need a sealant that moves with them.
Collieston is about 12 miles south-west of Peterhead, in Aberdeenshire. For regrouting in and around Collieston, please send an email to info@mrmastic.co.uk for a quick quote. We cover Aberdeenshire from our Crawley base. Across Aberdeenshire, we cover 161 places, and Collieston is one of them. For nearby work, see our Aberdeen page, about 15 miles away.
Work in AB41 works the same way as everywhere else we cover. Being close to the B9003, Collieston is simple for us to get to. Nearby, we also carry out regrouting in Newburgh (3 miles south-west), Hatton (5 miles north), Ellon (5 miles west), Foveran (5 miles south-west) and Cruden Bay (5 miles north-east). We also work in nearby towns such as Peterhead (12 miles north-east), Roanheads (12 miles north-east), Clerkhill (12 miles north-east), Port Henry (12 miles north-east), Oldmeldrum (14 miles west) and Mintlaw (12 miles north).
Landmarks near Collieston
Other landmarks nearby include Foveran Castle (4.2 miles south-west). Open spaces near Collieston include Cotehill Loch.
Regrouting for homes and businesses in Collieston
Regrouting suits shower walls, bathroom floors, kitchen splashbacks and wet rooms. Some jobs are a whole room, or just the area that has failed. Whatever the size, the method stays the same. If you have grout that’s cracking and breaking up and grout that stays dark however much it’s cleaned, we can help.
A bathroom in a place like Collieston gets the same daily wear as one in a city flat. Limescale is less of a problem with Scotland’s generally soft water, but mould still takes hold in damp sealant and grout.
You get a 12-month guarantee, the same in Collieston as everywhere else we work.
- Place
- Collieston (AB41)
- Region
- Aberdeenshire
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
What affects the cost of regrouting
We quote each job individually. This is what makes a difference:
- The number and length of the joints
- Any mould that needs treating
- How many areas need sealing
- Any working-time requirements on site
No two jobs are quite the same, so we quote each one individually. Size, access and the product the joint needs all play a part.
What to tell us for a quote
When you contact us, it’s useful to know:
- Any access issues, like height or stairs
- The type of property
- The problem you’ve noticed
- Photos by email, if that is easy
Want a quote for regrouting? Please drop us a line at info@mrmastic.co.uk with a few details. We’ll explain what we’d do and give you a clear quote before we start.
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Collieston: your questions answered
Can you do regrouting in Collieston?
Yes. Our work covers the whole of Scotland, and Collieston is part of that. You can email us at info@mrmastic.co.uk and let us know what needs doing, and we’ll send you a clear quote.
Is there a guarantee on regrouting in Collieston?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Should I try DIY first?
It depends on the job. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Do you take out the old sealant first?
Yes, always, and completely. New silicone doesn’t stick to old silicone, so the joint is cleaned back first.
Will it make a mess?
Tidy work is part of the job. Nearby surfaces are protected, and the area is left clean when we finish.
What do you put in the joint?
We choose the sealant for the joint, not the other way round. Movement, water and weather all affect the choice.
Can I add another job to the visit?
Yes. Several rooms, windows or areas can go on one quote.
Are you fully insured?
Yes. Full insurance covers our work.
Nearby places to Collieston
Also in Collieston
Keeping the joints in good condition
So the new joints stay in good condition:
- Wipe or squeegee the shower walls
- Rinse soap off the tiles after each shower
- Use gentle cleaners on grout
- Use a soft brush rather than a wire one
We will tell you when the area can be used again. Stick to that time, and avoid scrubbing the new grout hard for the first few days.
Cracked grout does not stay cracked for long. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
How the visit works
When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take anything from a few hours to a full day, depending on the area. Outside jobs in Collieston need a dry day, because sealant will not bond to a wet joint, so external jobs may need to move if the day turns wet. Work indoors is not affected.
- We check the tiles for any that are hollow or loose.
- The old grout is removed to an even depth.
- We vacuum the joints so the new grout bonds.
- New grout is pressed into the joints and the tiles are cleaned.
- We finish with silicone in the moving joints.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- For business premises, tell us about site rules or sign-in
- Clear the area around the work
Get a quote
To get a quote, send an email to info@mrmastic.co.uk and tell us where the job is and what the problem looks like. You will have a clear quote before we start.
Read more
When to call us in Collieston
Grout that was put in corners cracks because those joints flex. Those joints should be silicone, and if they’re grouted, a crack soon lets water in.
It’s worth asking for a quote if you see:
- Grout that makes sound tiles look old
- Old grout in a dated colour
- Gaps where the shower grout has gone
- Floor grout that will not come clean
Around Collieston, as everywhere, regrouting is only as good as the preparation behind it.
Before you book anyone
- Whether the sealant suits the joint
- Whether VAT is included
- The length of the guarantee
- Are they insured?
What the job involves on each surface
Kitchen splashbacks
The grout by the hob and sink takes most of the mess. We regroute and reseal the worktop joint.
Bathroom floors
If floor grout keeps cracking, the floor may be moving. We look for loose tiles first.
Can I do it myself?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.