Kent · England
Regrouting in Breach, Kent
Regrouting in Breach from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Floor grout that has worn and darkened
- Greasy, stained grout behind the hob
- Cracked grout along the bath or tray
How the visit works
All our tools and materials come with us in the van. After a quick look at the joints together, the area is protected and the work begins. It normally takes a few hours for a shower enclosure, longer for a whole room. For a village or hamlet like Breach, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We check the tiles for any that are hollow or loose.
- We rake out the grout evenly, protecting the tile edges.
- The joints are vacuumed clean.
- We regrout the joints and clean the tile faces.
- We finish with silicone in the moving joints.
Before we arrive
- Where the joints are inside, avoid wetting them before we arrive
- On commercial sites, let us know about site rules
- Let us know about parking restrictions
Get a quote
Want a quote for regrouting? Please call 0345 464 0079 or drop us an email with a few details. We will explain what we’d do and give you a clear quote before any work starts.
Read more
Regrouting in Breach, done properly
We regroute showers, bathroom walls and floors, splashbacks and wet rooms. It can be a full room, or just the area that has failed. Whatever the size, the method stays the same. If you have floor grout that won’t come clean and grout stained black or orange that won’t clean, we can help, whatever the surface.
Being in a small place like Breach makes no difference to the job itself: the journey and access are simply agreed in advance. Once we’re there, the bathroom or kitchen gets the same care as anywhere else.
Each job carries a 12-month guarantee, large or small.
- Location
- Breach (ME9)
- Wider area
- Kent
- Cover
- A year, on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Leave it or put it right?
Cleaning products may brighten grout for a time, but stains and mould that have soaked in tend to return. Replacing the grout and resealing the edges is a lasting fix. In a small place like Breach, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.
The cost depends on the amount of work, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts.
Why book with us
- Homes, businesses and hotels
- We leave the area clean and tidy
- Arbo and Everbuild products
- An ARBOMaster approved applicator
Take a look at our cost guide or our reviews.
Questions from Breach
Do you cover smaller places like Breach?
Yes, we do. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Do you work for landlords with property near Newington station?
Yes, rental work is part of what we do. You can phone 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before we start.
How soon can the shower be used after regrouting?
The wait depends on the materials and how warm the room is. We’ll tell you exactly how long when the job is done.
What guarantee comes with the work?
Our 12-month guarantee covers every job, including regrouting.
Where are you based?
We’re based in Crawley, and we cover South East England, London and all of Scotland.
Do you remove the old sealant?
Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.
Do I need to be at home?
It depends on the job. For work indoors, someone needs to let us in.
Which products do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Other services in Breach
Signs you need regrouting in Breach
Grout is porous, so it soaks up water, soap and dirt. Over time it stains, softens and starts to crumble, especially in a shower that is used every day.
Common reasons people contact us include:
- Splashback grout that has darkened
- Grout in corners that has cracked
- Grout in a colour the owner wants to change
- Crumbling grout between the tiles
If you look after a building such as Newington Church of England Primary School, washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes.
Comparing quotes
- How long to leave it before use
- Whether all the old sealant comes out first
- How the joint is cleaned and prepared
- What product goes in the joint
Regrouting in Breach: local notes
Breach is close to the coast. Near the coast, holiday lets and guest houses can see bathrooms used by one guest after another, and sealant and grout that work that hard wear out sooner. Hard water is the norm across most of the South East, which leaves limescale on sealant, grout and fittings.
In the older streets around Church of St Mary, walls and floors in older homes can move, and sealant and grout show it first. Rented homes near Newington station change hands often, and stained grout drags a rental down, and regrouting between lets puts that right.
Breach is about 3 miles east of Gillingham, in Kent. Homes, rented property, offices and hotels in Breach is covered for regrouting. Every job comes with our 12-month guarantee. Breach is one of 922 towns and villages in Kent where we work. Chelmsford is on our list too, about 27 miles from Breach.
Work in ME9 is quoted and booked the same way as anywhere else. Other places close to Breach include Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Within a short drive, we also cover Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).
Near you in Breach
In Breach, that means homes and buildings near Berengrave Chalk Pit, The Wheatsheaf pub and Leigh Academy Rainham, among other places. For rail, the closest station is Newington station, about 0.8 miles south-east of the centre. Other landmarks nearby include Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). Open spaces near Breach include Bishop Saltings.
Work for landlords, hotels and businesses
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Keeping joints in good order is simple maintenance that we can handle for you.
Housing providers, facilities teams and property managers book us too. We can quote a run of properties together, and we are fully insured.
How we quote for regrouting
Call for a quick quote. The main things that affect it are:
- The type of sealant required
- The amount of work
- When we can work, for business premises
- The old material and how stubborn it is
Some things make a job bigger or smaller: how much old sealant there is and how stubborn it is, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
Asking for a quote
There’s no need for technical detail. Just tell us:
- Any access issues, like height or stairs
- Roughly how big the job is
- The address or postcode of the job
- A few photos by email, if you can
A good description makes for an accurate quote. Tell us where the job is, what’s wrong and how much there is, and add pictures by email if you can.
Keeping the joints in good condition
Joint life depends on how it’s used and looked after. Here’s what we suggest:
- Use a squeegee on the tiles after showering
- Keep harsh bleach and acid cleaners off the grout
- Rinse the tiles after showering
- Keep the fan on after showering
If a tile starts to feel loose, get it looked at early. Movement will crack the new grout and lets water in.
Once grout cracks, it tends to get worse. Water gets in behind and the tiles can start to loosen and early regrouting can avoid a much bigger job.
When it is not the sealant
We’d rather tell you now than do work that won’t last, so here’s what sealant can’t put right:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Tiles that are chipped or split
- Waterproofing that has failed below the tiling
If in doubt, ring 0345 464 0079 or email us and we’ll say what we think before you book.
Surfaces we seal
- Bathroom floors
- Wet rooms
- Kitchen splashbacks
- Bathroom wall tiles
- Shower walls
- Tiled floors