Kent · England
Regrouting in Barnes Cray
Problem with your tiled areas in Barnes Cray? We cut out the old, prepare the joints and apply the right sealant, with a 12-month guarantee.
- Corners filled with grout instead of silicone
- Grout stained black or orange that will not clean
- Floor grout that will not come clean
Regrouting in Barnes Cray, done properly
Most regrouting jobs include resealing too. Grout belongs between tiles, but internal corners and edges flex, so they’re sealed with silicone rather than grout. Doing both at once leaves the whole area sound. If you have grout washed out of a shower and stained grout that cleaning won’t shift, we can put it right, on bathroom floors, bathroom wall tiles and wet rooms alike.
Homes around Barnes Cray range from older cottages to more recent houses. In older homes, walls and floors can move a little more, so the right flexible sealant matters.
We stand behind the work with a 12-month guarantee, so you are covered after we’ve gone.
- Place
- Barnes Cray (DA1, DA8)
- Region
- Kent
- Cover
- 12 months on all our work
- Quotes
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Barnes Cray questions
Do you cover Barnes Cray for regrouting?
Yes. Our work covers London and the South East, and Barnes Cray is part of that. You can call 0345 464 0079 or send us an email and let us know what needs doing.
Will you come out to Barnes Cray?
Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
What do you need from me for a quote?
Where the job is, what the problem is and roughly how big it is. Photos by email help too.
Can you seal over the old sealant?
No. We remove every bit of old sealant first, so the new sealant bonds properly.
Could my grout be a different colour after regrouting?
Yes, regrouting is the time to do it. Mention the colour you have in mind when you phone 0345 464 0079 or email us.
Are you an approved applicator?
Yes. We hold ARBOMaster approved applicator status.
How long should I wait before showering?
We will tell you on the day. The wait depends on the products and conditions so please stick to it.
Is it worth trying it myself?
It depends on the job. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Landlords, agents and businesses in Barnes Cray
If you manage several properties in or around Barnes Cray, several properties can go on one quote. Just tell us the addresses and what each one needs.
Letting agents often deal with us directly. Tell us the address, the job and how access works.
Nearby places to Barnes Cray
Other services in Barnes Cray
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly.
Honest limits
New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:
- Cracked or broken tiles
- Tiles that have come away from the wall
- Waterproofing that has failed below the tiling
If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before booking.
Where we work in Barnes Cray
- Tiled floors
- Bathroom floors
- Shower walls
- Wet rooms
- Bathroom wall tiles
- Kitchen splashbacks
Regrouting around Barnes Cray
Hard water is the norm across most of the South East, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
Schools such as Haberdashers' Aske's Crayford Academy are buildings too, and we reseal washrooms and kitchens in schools and businesses as well as homes. For landlords with property near Slade Green station, a regrout while the flat is empty is quicker than working around a tenant.
Barnes Cray is about 2 miles north-west of Dartford, in Kent. If you need regrouting in Barnes Cray, please phone 0345 464 0079 or send us an email for a quick quote. We cover Kent from our Crawley base. Our Kent coverage runs to 922 places, and Barnes Cray is one of them. We also work in London, around 13 miles away.
Every address in DA1 and DA8 is within our area for regrouting, from the main roads to the quietest streets. Streets in the area include Stour Road, Wilmot Road and Maiden Lane, and we cover them all. If you’re just outside Barnes Cray, we cover Slade Green (1 mile north), North End (1 mile north), Crayford (1 mile south-west), Barnehurst (1 mile west) and Bexley Riverside (1 mile north-west). Within a short drive, we also cover Sevenoaks (12 miles south), Gravesend (8 miles east), Northfleet (7 miles east), Swanley (4 miles south), Swanscombe (4 miles east) and Windmill Hill (8 miles east).
Around Barnes Cray
Around Barnes Cray, our work takes us to homes and buildings near Braeburn Park, Bird in Hand pub and Holy Trinity Church of England Primary School. Barnes Cray’s nearest station is Slade Green station, about 0.7 miles north of the centre. A little further out are West Hill Hospital (1 mile south-east) and Dartford Library (1.4 miles south-east). The countryside around Barnes Cray includes Wansunt Pit.
Why it’s worth doing now in Barnes Cray
With regrouting, your tiles stay where they are. Retiling is a much bigger job: stripping, making good, new tiles and new grout, and the room is out of use for longer. When the tiles are fine, it’s the sensible first step. Around Barnes Cray, water from a failed joint in an older home can soak into timber and plaster, which is far harder to put right than the sealant itself.
Combining jobs into one visit is generally more efficient than separate visits, so tell us about everything that needs sealing. You’ll get one clear quote for the whole job.
Why book with us
- 4.9 on Google from 180+ five-star reviews
- Old sealant always removed completely
- Homes, businesses and hotels
- We are fully insured
See our cost guide or customer reviews.
What we do, step by step
Before we leave, we go over the finished joints with you. The visit itself normally takes anything from a few hours to a full day, depending on the area, depending on the size of the job. In a smaller place like Barnes Cray, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- First, we check for loose or hollow tiles and point out any we find.
- Old grout is raked out to a consistent depth without chipping the tiles.
- Dust and debris are vacuumed out of every joint.
- Fresh grout goes into the joints and the tile faces are wiped clean.
- The corners and edges get new silicone, because grout there would crack.
How to prepare
- On commercial sites, let us know about site rules
- Plan for the work area to be out of bounds to pets and children
- Where the joints are inside, avoid wetting them before we arrive
Ask for a quote
There’s no standard price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, ring 0345 464 0079 or send us an email.
Related advice
How the job changes by surface
Corners and edges
The joint between tiles and a bath, tray or worktop gets silicone. Grout there would crack.
Kitchen splashbacks
A splashback can be regrouted without touching the worktop. The worktop edge is finished with silicone.
When to call us in Barnes Cray
Some grout fails because it was mixed or laid badly. If it was mixed too wet or not pressed in firmly can wash out within a few years.
Most people get in touch when they notice something like this:
- Discoloured grout on otherwise sound tiles
- Grout that’s cracking and breaking up
- Cracked grout along the bath or tray
- Grout washed out of a shower
In the older streets around Christ Church, walls and floors in older homes can move, and sealant and grout show it first.
What to look for in a quote
- Who turns up on the day
- What guarantee comes with the work
- Is VAT in the price?
- What the cure time is