Kent · England
Regrouting in Aylesford, Kent
Regrouting in Aylesford from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Grout that makes sound tiles look old
- Dirty, worn grout on a tiled floor
- Grout that’s cracking and breaking up
Regrouting in Aylesford, done properly
We work across Aylesford, regrouting bathrooms, showers and kitchens. The old grout is raked out, the joints cleaned and new grout laid, finished with new silicone at the edges. We work on bathroom wall tiles, bathroom floors and tiled floors, and people most often call us about kitchen splashback grout stained by grease and discoloured grout on otherwise sound tiles.
In a smaller place like Aylesford, homes are mostly houses and bungalows rather than flats, some older and some much newer. Sealant and grout wear out here just as they do in a big town.
All of our work is guaranteed for twelve months, in Aylesford and everywhere else we cover.
- Where
- Aylesford (ME20)
- Wider area
- Kent
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
It helps to know what we cannot do too:
- Leaks from pipes, valves or wastes (a plumber’s job)
- Failed tanking or waterproofing under the tiles
- Tiles that are chipped or split
Not sure which it is? You can call 0345 464 0079 or email us and we will tell you honestly before booking.
What we seal
- Kitchen splashbacks
- Wet rooms
- Tiled floors
- Bathroom floors
- Bathroom wall tiles
- Shower walls
What happens if it’s left?
Regrouting keeps the tiles you already have. Retiling means stripping the walls, making good and choosing new tiles, and often a few days without a shower. When the tiles are fine, it’s the sensible first step. Around Aylesford, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference.
What you get with us
- ARBOMaster approved applicator
- Anti-fungal silicone where joints get wet
- 180+ five-star Google reviews
- A 12-month guarantee on all work
Take a look at how sealant jobs are priced and our reviews.
What the job involves on each surface
Corners and edges
Where tiles meet a bath, tray or worktop, the joint is sealed. Grout in that joint wouldn’t last.
Bathroom floors
Cracked floor grout can point to movement underneath. We look for loose tiles first.
What we do, step by step
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes a few hours, or longer for a fully tiled room from start to finish. A visit to Aylesford is planned like any other: the time, the access and where to park are agreed in advance. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- First we agree what’s being done and flag any loose tiles.
- Grout is raked out without chipping the tiles.
- Dust is cleared from every joint.
- The new grout goes in, then the tile faces are cleaned.
- We renew the silicone at the corners and edges.
How to prepare
- Mention any parking rules near the property
- Clear the area around the work
- Tell us about access, such as stairs, a lift or high-level joints
How to get a quote
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. You will have a clear quote before work begins.
Related advice
Regrouting around Aylesford
Most of the South East has hard water, so limescale builds up on sealant, grout and fittings, and it has to be cleaned off before new sealant goes in.
For an older house near a landmark such as Aylesford Church, bathrooms in older houses have often been refitted more than once, with sealant laid over sealant. Schools such as Aylesford Primary School are buildings too, and washroom and kitchen sealant there needs the same care as at home, and schools and businesses are part of our work as well as homes. Letting a property close to Aylesford station? Then clean grout and fresh sealant between tenancies make a bathroom look cared for again.
Aylesford is about 3 miles north-west of Maidstone, in Kent. From the centre of Aylesford to the outskirts, we cover regrouting for every kind of property. Aylesford is one of 922 places in Kent we cover for regrouting. For nearby work, see our London page, about 28 miles away.
We cover every part of ME20 for regrouting. If you need regrouting at a property on Station Road, High Street and Hall Road or a nearby road, we can help. If you are just outside Aylesford, we cover Ditton (1 mile west), Allington (1 mile south-east), East Malling (2 miles west), Well Street (2 miles south-west) and Fant (2 miles south). Within a short drive, we also cover Maidstone (3 miles south-east), Sittingbourne (12 miles east), Dartford (15 miles north-west), Sevenoaks (12 miles west), Royal Tunbridge Wells (14 miles south-west) and Gravesend (10 miles north-west).
Around Aylesford
Typical jobs here are in homes near Aylesford School, The Chequers pub and Ditton Quarry and the streets around them. Aylesford has its own railway station: Aylesford station. A little further out are Allington Castle (1.7 miles east) and Medway megaliths (1.7 miles north-east). The countryside around Aylesford includes Burham Down and Blue Bell Hill.
What affects the quote in Aylesford
The price is agreed before any work begins. It’s based on:
- The type of sealant required
- Mould in or behind the old joints
- Any working-time requirements on site
- The old material and how stubborn it is
Rather than a set price list, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What we need to know
You do not need to know the technical terms. It helps if you can tell us:
- The type of property
- Where the job is, and your postcode
- Any previous sealing or DIY work
- Any access issues, like height or stairs
We quote each job on its own, so the first step is telling us about yours. Just ring 0345 464 0079 or send us an email with the details.
DIY versus a professional finish
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and the joint depth matters as much as the finish.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Landlord and commercial work in Aylesford
Water getting past a failed joint can damage the building, which is a bigger problem in a rented property. Resealing at the right time is simple maintenance.
If you manage several properties in or around Aylesford, several properties can go on one quote. Just tell us the addresses and what each one needs.
Nearby places to Aylesford
Also in Aylesford
Aylesford: your questions answered
Is Aylesford in your area for regrouting?
Yes. We work across London and the South East, and Aylesford is part of that. You can ring 0345 464 0079 or send us an email and tell us what needs doing.
Is Aylesford within the area you cover?
Yes, Aylesford is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.
Is regrouting a chance to pick a new grout colour?
Yes. It’s the ideal time to change it. Tell us the colour you’d like when you ask for a quote.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you work for hotels and businesses?
Yes. Larger jobs can be planned room by room or area by area.
How long does the job take?
Typically it takes a few hours, or longer for a fully tiled room. Bigger jobs take longer.
Is it worth trying it myself?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it doesn’t work out, we can redo it.
Do you reseal at the same time?
Yes, in most cases. Fresh grout next to old, mouldy silicone would look odd and wouldn’t keep water out.