Highland · Scotland
Mastic man in IV44
We cover every part of the IV44 postcode district, which takes in Kilbeg. Every joint is properly prepared, with a one-year guarantee.
Areas within IV44
Services in IV44
- Regrouting
- Window & door mastic
- Commercial & hotel sealant
- External & façade joints
- New-build mastic & snagging
- Sand mastic for sash & case windows
- Remedial sealant & repairs
- Gutter, fascia & soffit sealing
- Floor & skirting joints
- Glazing & conservatory sealant
- Bathroom & kitchen resealing
- Fire-rated sealant
- See all services
Let us know the job and your postcode and we’ll give you a clear price: email us at info@mrmastic.co.uk.
Neighbouring districts
More in Highland
Towns and villages in Highland
All areas
How bathroom resealing works in IV44
Across IV44, the joints we reseal are the ones that fail in any home: bath edges, tray joints, basin backs and kitchen upstands. Every joint is cut out, cleaned and left dry before it’s resealed. Common call-outs are for lumpy, uneven sealant from a DIY attempt and water getting behind the bath panel, across shower trays & enclosures, wet rooms and kitchen worktops & upstands.
On the day, we start by going over the job with you, so you know exactly what we’re doing. Surfaces next to the work are protected before any work begins. The work usually takes a couple of hours for a single bath or shower.
- We start by protecting the area and stripping out the old bead, including the film left on the tiles.
- We clean and degrease the joint and treat any mould.
- We let it dry fully and fill the bath with water before sealing.
- New anti-fungal silicone goes on in a colour to suit and is tooled to a clean finish.
- Finally we tidy up and explain the cure time before we leave.
What affects the price in IV44
Leaving a failed joint usually makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, send an email to info@mrmastic.co.uk for an honest opinion and a quote.
Why book with us
- Rated 4.9 stars on Google
- Trusted Arbo and Everbuild sealants
- White, clear, grey or coloured to suit, where the product allows
- Colour picked to suit the job
Get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Local landmarks in Kilbeg
In Kilbeg, that means homes and buildings near Bun-sgoil Shlèite and Sleat Parish Church and the streets around them. Well-known places in the area include Armadale Castle (1.2 miles south-west) and Museum of the Isles (1.3 miles south-west). Green spaces nearby include Sgùrr nan Caorach and Loch Ard.
Bathrooms and kitchens across IV44
In IV44, bathroom resealing takes in flats, houses, rentals and businesses, in Kilbeg and well beyond. Wherever the job is, all the old material comes out before anything new goes in.
The west of Scotland is wetter than the east, but outside joints take plenty of weather everywhere, while generally soft water means less limescale indoors but no less mould. That shapes the choice of sealant for jobs across IV44.
Kilbeg: Around Kilbeg, as everywhere, bathroom resealing is only as good as the preparation behind it. Homes close to Sleat Parish Church include some older properties, and older homes can move a little, which is hard on rigid grout and tired sealant.
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.
Aftercare tips
Good habits help new joints last longer. A few tips:
- Keep scourers and sharp tools away from the bead
- Wipe the sealant dry after showering
- Keep an eye on the corners, where splits start
- Wait for the cure time we give you
Mould needs damp, so keep the room aired. Use the fan, or open a window, while you bathe and for a while afterwards, so the bead dries out between uses.
A few black dots in the silicone soon become a black line. Once it’s deep in the silicone, cleaning normally won’t remove it. Catching it early keeps it a simple reseal.
Why act early?
Mould removers can fade the surface of a stained bead, but where mould is inside the silicone it usually comes back. The lasting answer is to remove the bead and start again.
What your quote should include
- What happens if they find a problem under the old sealant
- Whether they seal over old material or remove it
- Whether VAT is included
- How the colour is chosen
Work for landlords, hotels and businesses
We also work for businesses, from offices to washrooms and kitchens. On commercial sites, working times can be discussed when we quote.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. Several properties can go on one quote.
How the job changes by surface
Shower trays & enclosures
If a tray moves underfoot, new silicone won’t last. Movement is checked before anything is resealed, and tell you if it needs re-bedding first.
Sinks & splashbacks
Splashbacks in glass, tile or acrylic meet the worktop in a long joint. We renew it in clear, white or a matched colour.
FAQs for IV44
Do you take out the old sealant first?
Always. Sealing over old sealant is the main reason resealing fails early, and it’s something we never do.
Is it worth trying it myself?
Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Can you just seal over the old silicone?
No. New silicone will not bond to old silicone, so it lifts and traps water and mould underneath. We always take the old sealant out completely.
Can mouldy silicone be sorted out?
Yes, we can. We strip the bead, treat the joint and lay new anti-fungal silicone.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we’re part of it.
Does someone need to be in?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
Is it messy?
Very little: the area around the joints is protected first, and we clear up the old sealant and our materials before we leave.