Hampshire · England

New-build mastic & snagging in Shawford, Hampshire

New-build sealant joints in Shawford need attention? We cut out the old, prepare the joints and apply the right sealant.

  • Second-fix sealing on new plots
  • Kitchen sealant that has pulled off the wall
  • Shower seals failing in the first year or two

Trusted new build mastic in Shawford

What we cannot put right

Some problems need a builder, plumber or other trade rather than us:

  • Leaking fittings rather than failed sealant
  • Disputes or warranty claims with your builder
  • Baths and trays that move too much for sealant to cope with

If you are not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before you book.

Joints and surfaces we work on

  • Skirting & floors
  • Show homes
  • Kitchens
  • Bathrooms & en suites
  • Windows & doors
  • Plot handovers

How we handle new build mastic in Shawford

We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference. Common call-outs are for beads laid onto grit and dust from the build and cracks appearing as a new home settles, on kitchens, plot handovers and show homes.

Older homes in small places like Shawford often have timber floors that move with the seasons, so skirting and threshold joints need a flexible sealant rather than a rigid filler.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Where
Shawford (SO21)
Wider area
Hampshire
Cover
One year on every job
Price
Quoted before any work starts
Call
0345 464 0079
Updated
26 October 2026

Different surfaces, different methods

Bathrooms and en suites

Shower trays in new homes often move slightly in the first year. We reseal once the old bead is fully out.

Kitchens

As a new house dries, worktops and walls shift a little, which opens gaps along the back. A fresh flexible bead closes them.

DIY versus a professional finish

A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.

Work for landlords, hotels and businesses

Mouldy or split sealant often shows up at the end of a tenancy. We can quote for more than one property at once.

Housing providers, facilities teams and property managers book us too in Shawford and across Hampshire. We can quote a run of properties together, and we are fully insured.

Aftercare tips

How long the joints last depends on use and care. We suggest:

  • Wipe joints with warm soapy water
  • Wait for the cure time before using a resealed shower
  • Avoid running a DIY bead over the old one
  • Photograph failed sealant before it’s redone

Avoid standing on the rim of the bath or the edge of the tray. Report any movement in a bath or tray.

If a shower tray or bath seal splits in the first year, look for movement. Getting it resealed properly, and any movement checked, stops it recurring.

What happens on the day

All our tools and materials come with us in the van. Once we have agreed what’s being done, the area is protected and the work begins. Most jobs take anything from a few hours to several days, depending on the number of plots. Somewhere like Shawford needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. Each joint is checked for movement before we start.
  2. Old sealant is cut out and the joints cleaned.
  3. Joints are dried and primed where the product calls for it.
  4. New sealant goes in, with baths filled first so they’re at their heaviest.
  5. The finished joints are checked and the cure times given.

Before we arrive

  • Let us know about stairs, lifts or work at height
  • Clear the area around the work
  • Keep children and pets away from the work area

How to get a quote

Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job.

Ask for a quote

Read more

Do you need new build mastic in Shawford?

If plaster or screed was still damp when it was sealed, the bond suffers. On a busy site, joints are not always given time to dry.

Look out for these signs:

  • Leaking shower tray seals in a new home
  • Second-fix sealing on new plots
  • Frame joints opening as the plaster dries
  • Beads laid onto grit and dust from the build

In and around Shawford, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.

Before booking anyone

  • What happens if the job turns out different
  • Are they insured?
  • What the cure time is
  • What preparation is included

Choosing a sealant specialist

Questions from Shawford

Can you help a landlord with a rental near Shawford station?

Yes, rental work is part of what we do. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before any work starts.

Is Shawford in your area for new build mastic?

Yes, Shawford is within the area we cover. Our work covers London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.

Do the sealants smell?

Sometimes, a little. Any smell clears as the sealant cures.

Which products do you use?

The product depends on the job: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. We use products from Arbo and Everbuild.

Can you quote for more than one area?

Yes, we can. More than one area can be quoted together.

Will you leave a mess?

No. We protect the surfaces around the joints, and we tidy up before we go.

How long should I leave it?

It depends on the product. Before we leave, we will tell you the cure time.

Who should fix failed sealant in a new build?

Report it to the builder first while you are covered. If it is not resolved, we can reseal it properly.

Joints and finishes in Shawford homes

Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

For new homes near Shawford station, it’s worth checking the sealant early, while snags are still fresh.

Shawford is about 3 miles south of Winchester, in Hampshire. Our applicators cover new build mastic for homes and businesses in Shawford. Across Hampshire, we cover 683 places, Shawford among them. Our Southampton page covers work nearby (8 miles or so).

We work across SO21 for new build mastic. You’ll find streets such as Shawford Road and Pearson Lane. Close by, we work in Compton (1 mile west), Twyford (1 mile south-east), South Down (1 mile south-west), Otterbourne (1 mile south-west) and St Cross (2 miles north). Further out, we also cover Winchester (3 miles north), Eastleigh (4 miles south), Fareham (13 miles south-east), Andover (15 miles north-west), Totton (11 miles south-west) and Chandler's Ford (4 miles south-west).

Near you in Shawford

Typical jobs here are in homes near The Bridge Inn and St. Cross Park, among other places. There’s a railway station in Shawford itself: Shawford station. Other landmarks nearby include The Gurkha Museum (2.3 miles north) and Royal Hampshire County Hospital (2.7 miles north). Not far away are Twyford Down and Hockley Meadows.

Map of Shawford © OpenStreetMap contributors
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job