Kent · England
Park Farm New Build Mastic
Professional new build mastic in and around Park Farm, with old sealant always removed completely.
- Internal frame sealant that has split
- Cracks appearing as a new home settles
- Sealant that never bonded to the surface
Joints and finishes in Park Farm homes
Rainfall in the South East is lower than in much of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
In and around Park Farm, as anywhere, good new build mastic starts with a clean, dry, properly prepared joint.
Park Farm is about 1 mile south of Ashford, in Kent. From the centre of Park Farm to the outskirts, new build mastic is available for homes and businesses alike. 922 places in Kent are on our list. Crawley is on our list too, about 46 miles from Park Farm.
Here we cover the TN23 and TN25 postcode area for new build mastic. Local streets include Hawthorn Road, Snowbell Road and Redberry Road. Other places close to Park Farm include Kingsnorth (1 mile south-west), Newtown (1 mile north-east), Stanhope (1 mile north-west), South Willesborough (1 mile north-east) and Finberry (1 mile east). Further out, we also cover Canterbury (14 miles north-east), Folkestone (13 miles east), Faversham (13 miles north), Hythe (10 miles east), Davington (14 miles north) and Preston (13 miles north).
Around Park Farm
In Park Farm, that means homes and buildings near John Wallis Academy, Queen's Head Public House and Ashford Green Corridors, among other places. The closest station to Park Farm is Ashford International station, about 1.5 miles north. A little further out are William Harvey Hospital (2.4 miles north-east) and Ashford Designer Outlet (1.1 miles north). Green spaces nearby include Orlestone Forest.
How we handle new build mastic in Park Farm
We carry out plot mastic and second-fix sealing for builders, and snagging reseals for new-home owners. In both, preparation makes the difference, because that’s what rushed new-build sealant usually lacks. We work on windows & doors, kitchens and plot handovers, and common reasons people get in touch are messy sealant that spoils new finishes and skirting joints opening in the first winter.
Homes around Park Farm range from older cottages to newer houses, and their floors range just as widely, from timber that moves with the seasons to tiles laid on concrete. The sealant at skirtings and thresholds has to suit the floor it meets.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Park Farm (TN23, TN25)
- Region
- Kent
- Cover
- A year, on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Quotes for new build mastic in Park Farm
Call for a quick quote. The main things that affect it are:
- How much there is to do
- How much old sealant there is and how hard it is to remove
- Whether the work is at height
- The number of rooms or windows
The cost depends on how much there is to do, how hard the old material is to remove and how easy the joints are to reach. We give a clear quote before work begins, so you know where you stand.
What to tell us for a quote
When you contact us, these details help:
- The problem you’ve noticed
- Pictures of the joints, sent by email
- The rough size of the job
- If it’s domestic, commercial or a hotel
For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. We’ll give you a clear quote before any work starts.
When to call us in Park Farm
Fresh sealant can be knocked or cut by trades finishing off. A bead disturbed before it has cured may never seal properly.
Most people get in touch after spotting something like this:
- Gaps opening as the house dries out and settles
- Kitchen sealant that has pulled off the wall
- Plot mastic for developers ahead of handover
- Gaps between new skirting and floors
If you’ve bought a new home near Ashford International station, the sealant around baths, showers and frames is worth checking in the first year or two.
Before booking anyone
- How long the guarantee is
- How the joint is cleaned and prepared
- How long to leave it before use
- Whether you can choose the colour
Surface by surface
Plot handovers
Developers can send the plot schedule and specification and we will quote. We seal bathrooms, kitchens, frames and floors as agreed.
Bathrooms and en suites
Shower trays in new homes often move slightly in the first year. We reseal once the old bead is fully out with baths filled first.
Landlords, agents and businesses in Park Farm
Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.
If you manage several properties in or around Park Farm, several properties can be quoted together. Just tell us the addresses and what each one needs, and photos by email help.
When it isn’t the sealant
Sealant is not the answer to every problem, and we will tell you before we start. Sealant won’t put right:
- Broken tiles or a split tray
- Leaking fittings rather than failed sealant
- A tray or bath that isn’t properly supported, until it’s fixed
If you are not sure, just call 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.
Joints and surfaces we work on
- Plot handovers
- Show homes
- Kitchens
- Bathrooms & en suites
- Windows & doors
- Skirting & floors
What we do, step by step
Before we leave, we go over the finished joints with you and explain the cure time. The work normally takes a few hours for most snagging lists, longer for a run of plots, depending on the size of the job. A visit to Park Farm is planned like any other: the time, the access and where to park are agreed in advance. Outdoor jobs depend on a dry day, since sealant needs a dry surface.
- Each joint is checked for movement before any work starts.
- We remove the failed sealant and clean the joints.
- Joints are dried and primed where the product calls for it.
- Baths are filled with water, then the new sealant is applied.
- The finished joints are checked and the cure times given.
How to prepare
- Mention any leaks or damp you’ve noticed
- Tell us about any previous sealing or DIY attempts
- On commercial sites, let us know about site rules
Getting a quote
Quotes start with a quick conversation. Describe the problem, the location and the size of the job. When it suits you, call 0345 464 0079 or drop us an email.
Related advice
Park Farm questions
Can you do new build mastic in Park Farm?
Yes. We work across London and the South East, and Park Farm is part of that. You can ring 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.
I let a flat near Ashford International station. Can you help?
Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or email us with the details for a clear quote.
Can I do it myself?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Should I wait before resealing?
If the seal has failed and water is getting in, do it now. Hairline cosmetic gaps can wait until the house has settled.
What should I tell you?
A short description and the location, plus pictures if you have them. We will ask anything else we need to know.
How do I get a quote for new build mastic in Park Farm?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Do you work for developers?
Yes. We take on second-fix sealant work across new plots. Good preparation keeps snagging to a minimum.
Will it make a mess?
We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.
Places near Park Farm
More services for Park Farm
Keeping the joints in good condition
Good habits help new joints last longer. A few tips:
- Avoid scourers and strong chemicals on sealant
- Do not wait for the house to settle if water is getting through
- Check bath and shower seals every few months as the house settles
- Do not seal over failed sealant yourself
Ventilation matters in a new home, which is still drying out. Use the extractor fan or open a window after showers so moisture does not sit on the sealant.
Leave a failed new-build seal and water can reach the floor and the ceiling below. Catching it early keeps the fix to the sealant and protects the rest of the house.