Hertfordshire · England

High Leigh New Build Mastic

Professional new build mastic in and around High Leigh, with every bit of old sealant taken out first and a 12-month guarantee.

  • Gaps opening as the house dries out and settles
  • Second-fix sealing on new plots
  • Untidy sealant flagged on a snagging list

Book new build mastic in High Leigh

What affects the quote in High Leigh

Your quote is based on your job. We look at:

  • The type of sealant required
  • The size of the job
  • Whether there’s mould to deal with
  • How many areas need sealing

A few things move the cost up or down: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.

Asking for a quote

When you contact us, it’s useful to know:

  • The rough size of the job
  • Any previous sealing or DIY work
  • How we’d reach the joints
  • What the problem is, such as mould, gaps, leaks or cracking

We quote each job on its own, so start by telling us what you need. Simply ring 0345 464 0079 or drop us an email and describe the job.

New build mastic in High Leigh

Building dust is behind a lot of failed new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the sealant actually sticks. We are often asked to deal with messy sealant that spoils new finishes and second-fix sealing on new plots, across skirting & floors, kitchens and plot handovers.

Work in a small place like High Leigh just needs the journey and access planning, and once on site, the job is the same as anywhere.

You get a 12-month guarantee, the same in High Leigh as everywhere else we work.

Location
High Leigh (EN11)
Wider area
Hertfordshire
Guarantee
One year on every job
Quotes
A clear price before any work starts
Phone
0345 464 0079
Page updated
26 October 2026
Fresh white silicone going into the corner where a shower screen meets the tiled wall

What we’re called out for in High Leigh

If plaster or screed was still damp when it was sealed, the bond suffers. Site programmes don’t always leave time for joints to dry first.

These are the problems we’re asked about most:

  • Gaps behind new kitchen upstands
  • Gaps opening as the house dries out and settles
  • Leaking shower tray seals in a new home
  • Cracked sealant around new window and door frames

Around High Leigh, as everywhere, new build mastic is only as good as the preparation behind it.

What your quote should include

  • How much experience the applicator has
  • Which colour the sealant will be
  • How long to leave it before use
  • What product goes in the joint

Choosing a sealant specialist

How to look after the new joints

Aftercare is simple, and it makes a real difference:

  • Look at the sealant regularly in the first couple of years
  • Do not seal over failed sealant yourself
  • Put sealant faults on your snagging list early
  • Keep water off fresh sealant until it has cured

Photograph failed sealant before it’s redone and keep the builder’s replies. It’s useful if you need to raise other issues later.

The sooner you deal with untidy or cracking sealant, the less there is to put right. Small faults turn into leaks if left in a busy bathroom.

How the visit works

Every visit runs the same way: we check the joints, mask and protect the surrounding surfaces, carry out the job and tidy away. Most jobs take a few hours for most snagging lists, longer for a run of plots. In a small place like High Leigh, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by agreeing which joints are on the list, from the snagging sheet or plot schedule.
  2. We cut out every bit of the failed or messy sealant.
  3. Surfaces are cleaned of building dust and primed where needed.
  4. We apply a sealant that suits each joint and tool it to a neat finish.
  5. We check every joint and tell you how long each needs to cure.

Getting ready for the visit

  • Mention any parking rules near the property
  • Mention if the joints have been sealed before
  • Mention any sign-in or site rules at work premises

Ask for a quote

Asking for a quote is easy: let us know the job and the location and its rough size. A few photos by email make the job easier to understand.

Get a price

Read more

What happens if it’s left?

Small cosmetic gaps can wait for the house to settle, but water getting through can’t. Not sure whether yours can wait? You can ring 0345 464 0079 or drop us an email with a few pictures. Around High Leigh, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.

Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.

Why choose Mr Mastic in High Leigh

  • We agree the colour with you first
  • Colour picked to suit the job
  • Anti-fungal sanitary silicone in wet areas
  • Any old sealant cut out fully, not covered over

Take a look at our cost guide and our reviews.

New build mastic in High Leigh: local notes

Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

For new homes near Broxbourne station, it’s worth checking the sealant early, while snags are still fresh.

High Leigh is about 1 mile north-west of Hoddesdon, in Hertfordshire. Jobs in High Leigh get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. 381 places in Hertfordshire are on our list, large and small. London is on our list too, about 18 miles from High Leigh.

We cover every part of the EN11 postcode area for new build mastic. That includes homes and businesses on Lord Street, Sedgwick Grove and Box Lane. Neighbouring places we cover for new build mastic include Woollensbrook (1 mile north), Goose Green (1 mile west), Hoddesdon (1 mile south-east), Broxbourne (1 mile south) and Hailey (1 mile north). We also work in nearby towns such as Stevenage (12 miles north-west), St Albans (13 miles west), Bishop's Stortford (11 miles north-east), Welwyn Garden City (8 miles west), Harpenden (14 miles west) and Cheshunt (4 miles south).

Landmarks near High Leigh

Typical jobs here are in homes near Barclay Park, King William IV Public House and Robert Barclay Academy, among other places. High Leigh’s nearest station is Broxbourne station, roughly 1.3 miles south-east. Well-known places in the area include Lowewood Museum (0.8 miles south-east) and Hertford County Hospital (3.5 miles north-west). For a walk, there’s Danemead and Cheshunt Lake.

Map of High Leigh © OpenStreetMap contributors

What the job involves on each surface

Show homes

We seal show-home bathrooms, kitchens and frames ready for viewings. We will plan around viewing times.

Bathrooms and en suites

En suite seals are easy to miss on a snagging list until they leak. Resealing properly keeps water where it belongs.

Honest limits

We’d rather tell you now than do work that won’t last, so here’s what sealant cannot put right:

  • Cracking that points to a structural problem
  • Deciding who is responsible under a builder’s warranty
  • Leaks from pipes, valves or wastes, which need a plumber

If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before you book.

Where we work in High Leigh

  • Skirting & floors
  • Show homes
  • Kitchens
  • Bathrooms & en suites
  • Windows & doors
  • Plot handovers

High Leigh questions

Is High Leigh in your area for new build mastic?

Yes, High Leigh is within the area we cover. We work across London and the South East. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.

Can you help a landlord with a rental near Broxbourne station?

Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.

Should I try DIY first?

For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.

What do you need from me for a quote?

Where the job is, what the problem is and roughly how big it is. Photos by email help too.

Should I wait before resealing?

That depends on the joint. Failed seals in wet areas need doing now, while small cosmetic gaps can wait a while.

Is there any odour?

Some sealants have a smell while they cure, but it fades. Opening a window helps.

Why has my new-build shower seal failed already?

A new house dries and settles for a year or two, and sealant is often applied quickly onto dusty surfaces. Either can make it fail early.

Will you leave a mess?

No. The area is protected while we work and cleaned up afterwards.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job