West Sussex · England

New-build mastic & snagging in Ashurst, West Sussex

New-build sealant joints in Ashurst need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Worktop and upstand sealant coming away
  • Messy sealant that spoils new finishes
  • Cracks appearing as a new home settles

New build mastic near Ashurst

How the job changes by surface

Windows and doors

Internal joints between frames and plaster often crack as a new house dries. We remove cracked sealant and apply a flexible one in a matching colour.

Show homes

Bathrooms, kitchens and frames in show homes are sealed or resealed to a neat finish. We’ll plan around viewing times.

New build mastic in Ashurst, done properly

Building dust is behind a lot of failed new-build sealant. We clean every joint thoroughly and prime where the surface and product need it, so the sealant actually sticks rather than sitting on a layer of grit. We work on windows & doors, kitchens and bathrooms & en suites, and common reasons people get in touch are joints pulling apart as timber shrinks and messy sealant that spoils new finishes.

Somewhere as small as Ashurst, new homes tend to be conversions, self-builds or a few houses rather than an estate. Each still needs its sealant and floor joints finished properly.

Your job is guaranteed for a year, as with all our work.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Where
Ashurst (BN44)
Wider area
West Sussex
Guarantee
12 months on all our work
Price
Quoted before any work starts
Phone
0345 464 0079
Updated
26 October 2026

What we’re called out for in Ashurst

Fresh sealant can be knocked or cut by trades finishing off. A bead disturbed before it has cured may never seal properly, and the problem shows up after you move in.

Any of these means the joints need attention:

  • Sealant work across a run of new homes
  • Sealant that never bonded to the surface
  • Internal frame sealant that has split
  • Gaps opening as the house dries out and settles

Around Ashurst, as everywhere, new build mastic is only as good as the preparation behind it.

Before booking anyone

  • What insurance they hold
  • How the joint is cleaned and prepared
  • Is the old sealant removed completely?
  • How long to leave it before use

How to choose a mastic man

What happens if it’s left?

Resealing everything on a snagging list in one visit is generally simpler than chasing joints one at a time. It’s one visit, one quote and one set of cure times. Where a wall is exposed, as many are in small places like Ashurst, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

Homes and businesses are quoted the same way: how much there is to do, how we reach it and what it needs, along with when we can work on site. Call for a quick quote and we’ll explain what it covers.

Why Ashurst customers choose us

  • Fully insured
  • Over 20 years’ experience
  • Sealant colour chosen to suit
  • Homes, businesses and hotels

See what affects the cost or customer reviews.

Joints and finishes in Ashurst homes

The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

For jobs in and around Ashurst, choosing the right material for each joint is as important as a tidy finish.

Ashurst is about 7 miles north of Shoreham-by-Sea, in West Sussex. Our applicators cover new build mastic for householders, landlords and businesses in Ashurst and the surrounding area. Ashurst is one of 371 towns and villages in West Sussex where we work. For nearby work, see our Brighton page.

Here we cover the BN44 postcode area for new build mastic. Whether your property is on Church Lane and School Lane or a nearby road, we can help. We also cover the places around Ashurst: Partridge Green (2 miles north-east), Dial Post (2 miles north-west), Wiston (2 miles south-west), Littleworth (3 miles north) and Ashington (3 miles west). Within a short drive, we also cover Crawley (14 miles north-east), Horsham (9 miles north), Worthing (8 miles south-west), Haywards Heath (11 miles north-east), Burgess Hill (9 miles east) and Littlehampton (12 miles south-west).

Landmarks near Ashurst

Around Ashurst, our work takes us to homes and buildings near Fountain Inn and the streets around them. Well-known places in the area include Steyning Museum (3.1 miles south). For a walk, there’s Chanctonbury Hill and Knepp Wildland.

Map of Ashurst © OpenStreetMap contributors

Looking after it afterwards

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Avoid scourers and strong chemicals on sealant
  • Resist patching a failed seal with a tube from the DIY shop
  • Put sealant faults on your snagging list early
  • Follow the cure time we give you

Leave the sealant for the cure time we give you before showering or bathing. Silicone is generally left for about a day.

A failed seal in a new home lets water into joists, plasterboard and ceilings. Early resealing keeps the job small.

Your questions about new build mastic in Ashurst

Is Ashurst in your area for new build mastic?

Yes. We work across London and the South East, and Ashurst is part of that. Just ring 0345 464 0079 or email us with a few details of the job.

Will you come out to Ashurst?

Yes. Ashurst is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Can you work on commercial sites?

Yes, regularly. We can plan bigger jobs in stages to suit the site.

What sealant do you use?

Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.

What do you need from me for a quote?

Only a few details: where it is, what you’ve noticed and how we reach it. After that, simply ring 0345 464 0079 or drop us an email.

Do you work through snagging lists?

Yes. Send it with pictures and we will quote for the sealant items. If something isn’t sealant, we’ll say so.

When is the sealant fully cured?

Different products cure at different speeds, so please follow the time we give you.

How much does new build mastic cost in Ashurst?

Size, access and the old material all affect the cost. Ask us for a quote.

How we quote for new build mastic

The quote reflects the job in front of us. We take into account:

  • How easy the joints are to reach
  • The number and length of the joints
  • How much old sealant there is and how hard it is to remove
  • When we can work, for business premises

Instead of a standard rate, we price the job in front of us: the amount of work, the old material and the access. You will know the price before we begin.

Helping us quote

Photos help, but a description is a good start. Please mention:

  • How many joints, rooms or windows are involved
  • Whether it’s a home or a business
  • Photos by email, if that is easy
  • Any previous sealing or DIY work

If you’re in Ashurst and need new build mastic, call 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you’ll get a clear quote before we start.

DIY sealant or a professional job?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.

What happens on the day

Good joint work is mostly preparation, and we do not rush it. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours in a single home. Somewhere as small as Ashurst, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First we work through your snagging list or plot schedule with you.
  2. Failed or untidy sealant is cut out completely.
  3. Each joint is cleaned of dust and grit, then primed if required.
  4. A sealant chosen for each area goes in and is tooled smooth.
  5. We check every joint and tell you how long each needs to cure.

How to prepare

  • Where the joints are inside, avoid wetting them before we arrive
  • Plan for the work area to be out of bounds to pets and children
  • Mention any parking rules near the property

Get a quote

We don’t publish a price list, because every job is different. Instead, we give you a clear quote for your job. To get started, ring 0345 464 0079 or email us.

Get a quick quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job