Hampshire · England
Worthy Down Gutter Sealing
Specialist gutter sealing for Worthy Down: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Wet patches on the wall under a gutter joint
- Stop ends leaking at the end of a run
- Old gutter sealant that has let go
How we handle gutter sealing in Worthy Down
A leaking gutter joint marks the wall and wets the ground underneath. Resealing the joint is often all it needs if the gutter isn’t damaged. If you have quick sealant fixes on gutters that didn’t last and dripping gutter ends, we can put it right, on garage door frames, gutter joints and soffit joints alike.
Somewhere as small as Worthy Down, homes and farm buildings often face open ground, so walls and rooflines take the full force of wind and rain. Joints on those walls need a sealant that moves with the building and stays in place.
Whatever the size of the job, you get the same one-year guarantee.
- Where
- Worthy Down (SO21)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
What we cannot put right
We will always be straight with you, so here’s what new sealant will not do:
- Rotten or damaged fascia boards
- Downpipes that are blocked or broken
- Cracked, split or warped gutter sections
If you are not sure, just ring 0345 464 0079 or email us and we’ll give you a straight answer.
Surfaces we seal
- Garage door frames
- Gutter joints
- Gutter end caps
- uPVC fascias
- Roofline trims
- Soffit joints
Nearby places to Worthy Down
Also in Worthy Down
What happens if it’s left?
Leaving a leaking end cap can send water down the wall all winter. Resealing it is a quick job compared with treating damp later. Where a wall is exposed, as many are in small places like Worthy Down, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we will talk you through it.
Why book with us
- Experience in homes, commercial sites and hotels
- Approved under the ARBOMaster scheme
- Tidy, careful work
- Anti-fungal silicone where joints get wet
See what affects the cost and customer reviews.
Can I do it myself?
What a professional job adds is preparation and the right product. We take joints back to clean, dry surfaces, and the sealant is matched to the joint and its conditions.
A DIY attempt doesn’t rule out a professional job. We cut it out and start again, so tell us about it when you ask for a quote.
How it works
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The job generally takes a few hours, depending on the number of joints and the access from start to finish. In a small place like Worthy Down, access is generally the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we agree which joints need sealing.
- Each joint is cleaned and any old sealant removed.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Before we arrive
- Mention any tricky access
- Let us know about earlier repairs to the joints
- Where the joints are inside, avoid wetting them before we arrive
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.
Related advice
What affects the quote in Worthy Down
You will get a clear quote before work begins. It’s based on:
- The type of sealant required
- The number and length of the joints
- The number of rooms or windows
- Working hours on commercial sites
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and agree the price before starting.
What to tell us for a quote
Photos help, but a description is a good start. Please mention:
- Whether it has been sealed before
- Where the job is, and your postcode
- A few photos by email, if you can
- The problem you’ve noticed
Call for a quick quote, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved.
Worthy Down buildings and the weather
The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
For an older house near a landmark such as St Margaret's, an extension built onto an older house moves differently, and the joint between them takes the strain. If you let a flat or house near Winchester station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.
Worthy Down is about 4 miles north of Winchester, in Hampshire. For gutter sealing in and around Worthy Down, it’s easy to get a quote: please call 0345 464 0079 or send us an email. We cover Hampshire from our Crawley base. 683 places in Hampshire are on our list. For nearby work, see our Southampton page, about 14 miles away.
Here we cover the SO21 postcode area for gutter sealing. You will find streets such as Coopers Close, Coate Drive and Wellesley Drive. Neighbouring places we cover for gutter sealing include South Wonston (1 mile north), Springvale (2 miles south-east), Crawley (3 miles west), Sutton Scotney (3 miles north) and Stoke Charity (3 miles north-east). We also work in nearby towns such as Basingstoke (15 miles north-east), Winchester (4 miles south), Eastleigh (10 miles south), Andover (9 miles north-west), Totton (15 miles south-west) and Chandler's Ford (9 miles south).
Around Worthy Down
We work in homes and buildings around Henry Beaufort School and the streets around them. The closest station to Worthy Down is Winchester station, roughly 3.2 miles south. A little further out are Royal Hampshire County Hospital (3.5 miles south) and Royal Observer Corps Museum (2.7 miles south-east). Not far away are Winnall Moors.
Do you need gutter sealing in Worthy Down?
Water spilling over a blocked gutter is often mistaken for a leak. A blocked downpipe makes water back up so we check the cause first.
Common reasons people contact us are:
- Old gutter sealant that has let go
- Streaks down the brickwork from a leaking joint
- Open joints in fascias and soffits
- Old sealant on roofline trims that has split
For site and facilities teams at buildings such as South Wonston Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
Questions to ask before you book
- How much experience the applicator has
- How the colour is chosen
- Is the old sealant removed completely?
- What product goes in the joint
Landlords, agents and businesses in Worthy Down
Landlords and agents in Worthy Down can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for before the next move-in.
Mouldy or split sealant often shows up at the end of a tenancy, and it’s easy to sort out between tenants. We can quote for more than one property at once.
Questions from Worthy Down
I let a flat near Winchester station. Can you help?
Yes, rental work is part of what we do. Just ring 0345 464 0079 or send us an email and tell us about the property, and we will give you a clear price.
Is Worthy Down in your area for gutter sealing?
Yes. We work across London and the South East, and Worthy Down is part of that. You can ring 0345 464 0079 or send us an email and let us know what needs doing.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Where are you based?
Our base is in Crawley, and we cover South East England, London and all of Scotland.
Is sealant enough for a gutter that has dropped?
Not on its own. A sagging gutter pulls its joints apart so it needs refixing before sealing.
Which products do you use?
Products from Arbo and Everbuild, among others, picked for each joint. We explain the product when we quote.
Can new sealant go over the old?
No, it will not last. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
How long before the joint can be used?
Different products cure at different speeds, so follow the cure time we give you when we finish.