Kent · England

Gutter Sealing in Sole Street

Gutter sealing for Sole Street and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.

  • End caps that drip every time it rains
  • Leaking gutter joints and stop ends
  • Internal damp traced to a gutter joint

Gutter sealing in Sole Street

Gutter sealing in Sole Street

We work across Sole Street on leaking gutter joints and roofline trims. Low-level work is straightforward and if it’s higher up, let us know and we will confirm what access is needed. Common call-outs are for old sealant on roofline trims that has split and leaking gutter joints and stop ends, on soffit joints, roofline trims and uPVC fascias.

External sealant needs dry, clean surfaces, so work around Sole Street is planned for dry weather. Let us know about access to every wall, plus any garages or outbuildings.

Our work is backed for twelve months.

Place
Sole Street (DA13, DA12)
Region
Kent
Guarantee
12 months on all our work
Price
Quoted before any work starts
Call
0345 464 0079
Last updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

DIY sealant or a professional job?

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.

Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.

What affects the quote in Sole Street

Jobs vary more than people expect. What affects the quote:

  • The number of rooms or windows
  • The amount of work
  • The old material and how stubborn it is
  • How easy the joints are to reach

What you pay reflects the work, not a rough estimate. That’s why we ask a few questions first and give you a clear price before work begins.

Helping us quote

There’s no need for technical detail. Just tell us:

  • How many joints, rooms or windows are involved
  • A few pictures by email, if you can
  • Any access issues, like height or stairs
  • Any previous sealing or DIY work

To get a quote, phone 0345 464 0079 or drop us an email with the location and a short description of the problem. You’ll have a clear quote before we start.

Outside joints around Sole Street

Historic houses like Cobham College (about 0.9 miles east) are a reminder that the area around Sole Street has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth. The South East is one of the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

In the older streets around St Mary's Room, older walls, gutters and the joints where extensions meet them need a flexible sealant. If you let a flat or house near Sole Street station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

Sole Street is about 3 miles south of Gravesend, in Kent. Every kind of property in Sole Street is covered for gutter sealing. Every job comes with our one-year guarantee. 922 places in Kent are on our list, from the larger towns to small villages. London is on our list too, around 22 miles away.

Here we cover the DA13 and DA12 postcode area for gutter sealing. Local streets include Scratton Fields, Sole Street and Manor Road, all of which we cover. Other places close to Sole Street include Gold Street (1 mile east), Round Street (1 mile north), Henley Street (1 mile south-east), Meopham (1 mile south-west) and Foxendown (1 mile south). We also work in nearby towns such as Maidstone (10 miles south-east), Dartford (8 miles north-west), Sevenoaks (11 miles south-west), Gravesend (3 miles north), Tonbridge (14 miles south) and Northfleet (4 miles north-west).

Landmarks near Sole Street

Around Sole Street, our work takes us to homes and buildings near The Railway Inn, Meopham School and Camer Park Country Park and the streets around them. Sole Street has its own railway station: Sole Street station. Well-known places in the area include Gravesham Museum (3.9 miles north) and Gravesham Community Hospital (4 miles north). Not far away are Ranscombe Farm and Gad's Hill.

Map of Sole Street © OpenStreetMap contributors

Do you need gutter sealing in Sole Street?

Sealant on fascias and trims weathers like any outdoor joint. It goes hard, cracks and pulls away over time.

The problems people usually mention when they call include:

  • Old gutter sealant that has let go
  • Garage door frames letting rain in
  • Streaks down the brickwork from a leaking joint
  • Damp patches inside below a leaking gutter

Schools such as Cobham Primary School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing.

Questions to ask before you book

  • Whether they’re fully insured
  • How the colour is chosen
  • Who does the work, and how experienced they are
  • How the joint is cleaned and prepared

Choosing a sealant specialist

Aftercare tips

Looking after new joints is easy:

  • Check the gutters during heavy rain
  • Don’t lean ladders against the gutter itself
  • Make sure downpipes are not blocked
  • Clean out the gutters once or twice a year

If a gutter starts to sag, get the brackets looked at. If it drops, the joints will open.

Once roofline sealant splits, water can get behind it. Sealing it early keeps the boards behind dry and the wall below.

Leave it or put it right?

If the problem is a blocked downpipe, sealing won’t help. We check the cause first and point you to the right trade if needed. Where a wall is exposed, as many are in small places like Sole Street, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.

A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, ring 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.

Why Sole Street clients choose us

  • We leave the area clean and tidy
  • Experience in homes, commercial sites and hotels
  • 20+ years of sealant experience
  • White, clear, grey or coloured to suit, where the product allows

Take a look at how sealant jobs are priced or customer reviews.

How the job changes by surface

Gutter joints

A dripping joint doesn’t always mean a failed gutter. Resealing is normally enough.

Garage door frames

The joint between frame and brickwork moves and weathers. We use a sealant made for outdoor joints.

Sole Street questions

I let a flat near Sole Street station. Can you help?

Yes. We work for letting agents and landlords as well as householders. You can ring 0345 464 0079 or email us with the details for a clear quote.

Do you cover Sole Street for gutter sealing?

Yes. We work across London and the South East, and Sole Street is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job.

Do I have to be there?

We need access to the joints, so we will agree that with you when we book. Indoors, that normally means someone at home.

Where is Mr Mastic based?

Mr Mastic is based in Crawley. Our applicators cover Sole Street.

How long before the joint can be used?

That depends on the sealant used, so please follow the time we give you when we finish.

Do you hold any approvals?

Yes. Mr Mastic is an ARBOMaster approved applicator, and we’re fully insured.

Is it possible to stop a gutter joint dripping with sealant?

Usually, if the gutter is sound. The joint is cleaned and dried first so the seal holds.

Do you replace gutters or fascias?

No. We seal leaking joints and trims. A gutter installer or roofer deals with replacement.

How the visit works

We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on the number of joints and the access. For a village or hamlet like Sole Street, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. We find where the water is coming from and check the gutter is sound.
  2. We remove the old sealant and clean the joint.
  3. We dry the joint so the new sealant can bond.
  4. We seal the joint with a sealant made for gutters.
  5. We check the run and clear debris near the joints.

How to prepare

  • Let us know about stairs, lifts or work at height
  • Tell us about any previous sealing or DIY attempts
  • Let us know if you’ve seen damp or leaks

Ask for a quote

Asking for a quote is easy: let us know the job and the location. Photos by email help us understand the job.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job