Aberdeenshire · Scotland

Gutter Sealing in Montrose

Gutter sealing for Montrose and the surrounding area: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Cracked sealant along roofline trims
  • Damp patches inside below a leaking gutter
  • Quick sealant fixes on gutters that didn’t last

Gutter sealing near Montrose

About our gutter sealing in Montrose

A lot of gutter leaks come down to one tired joint. We clean out the joint, dry it and reseal it with a sealant made for guttering. If the gutter itself has failed, we say so. We work on roofline trims, uPVC fascias and gutter joints, and common reasons people get in touch are open joints in fascias and soffits and stop ends leaking at the end of a run.

In a town like Montrose, older stone-built streets sit alongside newer estates with brick, render and uPVC rooflines. Each has its own weak points: worn joints in old gutters, and dried-out movement joints in newer walls.

We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.

Place
Montrose (DD10)
Wider area
Aberdeenshire
Guarantee
12 months on all our work
Price
Quoted before any work starts
Email
info@mrmastic.co.uk
Updated
26 October 2026
Applicator reaching up to seal an external door frame on a sunny day

Work for landlords, hotels and businesses

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.

If you manage several properties in or around Montrose, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs.

Why act early in Montrose

Water from a leaking joint hits the same spot every time. Left, it can stain walls and lead to damp so early sealing is worthwhile. Scottish weather finds any gap, and in a town like Montrose, failed outside joints soon let damp into walls. Inside, a failed seal around a bath or shower lets water into floors and ceilings.

What you pay reflects the work, not a rough estimate. That is why we ask a few questions first.

Why us?

  • Approved under the ARBOMaster scheme
  • We never seal over old sealant
  • You choose the colour before work begins
  • Tidy, careful work

Take a look at our cost guide and our reviews.

How to look after the new joints

So the new joints stay in good condition:

  • Clean out the gutters once or twice a year
  • Keep ladders off the guttering
  • Deal with a drip before winter
  • Do not leave a sagging gutter

Keep the gutters clear of leaves and moss, so water drains away past the joints. Standing water strains every seal.

Early sealing limits how much water hits the wall. We will let you know if the gutter needs more than sealant.

Common problems we fix in Montrose

Leaves and moss hold water in the gutter. Water that can’t drain works its way through a weak joint and leaks out.

The problems people normally mention when they call are:

  • Failed sealant on a garage door frame
  • Gaps along fascia and soffit joints
  • Earlier gutter repairs that have peeled off
  • Dripping gutter ends

Letting a property close to Montrose station? Then a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking.

What to look for in a quote

  • Which colour the sealant will be
  • Whether VAT is included
  • What guarantee comes with the work
  • How hidden problems are handled

Our hiring checklist

Montrose buildings and the weather

Montrose is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.

For site and facilities teams at buildings such as Montrose Academy, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.

Montrose is about 26 miles north-east of Dundee, in Aberdeenshire. Montrose gets the same service as everywhere we cover: the old material taken out, joints prepared properly and a 12-month guarantee. Montrose is one of 161 towns and villages in Aberdeenshire we cover for gutter sealing. Dundee is on our list too, about 26 miles from Montrose.

All of DD10 is within our area for gutter sealing. Whether your property is on Market Street, High Street and Murray Lane or a nearby road, our applicators can take on the job. You’ll find Montrose on the A92 and A935, so it’s easy for us to get to. Nearby, we also carry out gutter sealing in Ferryden (1 mile south), Kirkton of Craig (2 miles south), Hillside (2 miles north), Craigo (4 miles north-west) and St Cyrus (4 miles north-east). We also work in nearby towns such as Laurencekirk (8 miles north), Inverbervie (11 miles north-east) and Johnshaven (8 miles north-east). As one of the bigger places in Aberdeenshire, Montrose has every kind of property, from flats to offices.

Around Montrose

We work in homes and buildings around Royal Arch Bar and the streets around them. Montrose has its own railway station: Montrose station. Other landmarks nearby include William Lamb Sculpture Studio (within half a mile south) and Montrose Castle (0.5 miles south-west). For a walk, there’s Duns Dish and Montrose Basin.

Map of Montrose © OpenStreetMap contributors

The process

When we get to you, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. After that, the work takes an hour or two for a few joints, longer for a full run. A visit in Montrose needs three things planned: access, parking and where the work is. Outside work depends on the weather, as sealant needs a dry surface.

  1. We look at where the water is coming from and check the gutter is not broken or sagging.
  2. We clean out the joint and take out the old sealant.
  3. The joint is dried, because sealant won’t bond to a wet surface.
  4. We seal the joint with a sealant made for gutters and outdoor use.
  5. We look along the gutter and clear debris around the joints.

How to prepare

  • Keep pets and children clear of the area while we work
  • Mention any leaks or damp you’ve noticed
  • Try not to wet indoor joints just before the visit

Getting a quote

Every job is quoted individually. Simply drop us a line at info@mrmastic.co.uk and describe the job.

Get a price

Advice

How the job changes by surface

Roofline trims

We seal the trims, not the roof. A roofer deals with the roof itself.

Gutter end caps

Stop ends hold back water at the end of a run. When their seal fails, they drip.

What sealant work can’t fix

We will not take on work that won’t last, so here’s what sealant cannot put right:

  • Fascias that need replacing
  • Blocked downpipes
  • Roof leaks, slipped tiles or failed flashing (a roofer’s job)

If you’re not sure, just send an email to info@mrmastic.co.uk and we’ll give you a straight answer.

Joints and surfaces we work on

  • Garage door frames
  • Gutter end caps
  • uPVC fascias
  • Gutter joints
  • Soffit joints
  • Roofline trims

Common questions in Montrose

Is Montrose in your area for gutter sealing?

Yes, Montrose is within the area we cover. We work across all of Scotland. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing, and we’ll send you a clear quote.

Can you help a landlord with a rental near Montrose station?

Yes, we work for landlords and letting agents. Just send an email to info@mrmastic.co.uk and tell us about the property, and we will send you a clear quote.

What does gutter sealing cost?

Every job is different, so each one gets its own quote. For a quick quote, drop us a line at info@mrmastic.co.uk with a short description of the job.

Is gutter cleaning part of the job?

Only around the joints we seal because the joint must be clean. Cleaning the whole run is a separate job.

Is it messy?

Not at all. The area is protected while we work and cleaned up afterwards.

What should I tell you?

Let us know what needs doing and where. If we need more, we’ll ask.

Is it worth trying it myself?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

When is the sealant fully cured?

Cure times vary by product and the temperature. Before we leave, we’ll tell you the cure time.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job