Angus · Scotland
Maryton Gutter Sealing
Gutter sealing in Maryton from a team with over 20 years’ experience. 180+ five-star Google reviews and a 4.9 rating.
- Drips from gutter joints and end caps
- Old sealant on roofline trims that has split
- Wet patches on the wall under a gutter joint
What we can’t put right
New sealant can’t fix everything, and we will tell you before any work starts. Sealant won’t put right:
- A gutter length that has split
- Boards that have decayed or split
- Water backing up from a blocked pipe
Not sure which it is? You can send an email to info@mrmastic.co.uk and we will tell you honestly before booking.
Where we work in Maryton
- Gutter end caps
- uPVC fascias
- Garage door frames
- Soffit joints
- Gutter joints
- Roofline trims
About our gutter sealing in Maryton
We seal leaking gutter joints, end caps, fascia and soffit joints, along with roofline trims and garage door frames. It’s all about the joints rather than new guttering. Common call-outs are for damp on an inside wall under a dripping gutter and old sealant on roofline trims that has split, on garage door frames, gutter joints and uPVC fascias.
In and around a place like Maryton, many buildings face open ground and take the full weather. Gutter joints and wall joints take a battering, so they need a sealant that moves with the building.
The work is covered for a year after we finish. If anything isn’t right with it, drop us a line at info@mrmastic.co.uk.
- Location
- Maryton (DD8)
- Wider area
- Angus
- Guarantee
- A year, on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Why deal with it now?
Replacing fascias because of open joints is usually unnecessary. Sealing the joints tidies them up as long as the boards are in good condition. In a place like Maryton, small leaks are easy to put off, but water behind a failed seal does the most damage when nobody’s watching.
Some things make a job bigger or smaller: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What you get with us
- Approved under the ARBOMaster scheme
- More than 20 years in sealant work
- Colour picked to suit the job
- Anti-fungal silicone where joints get wet
For landlords and businesses
We work for landlords and agents as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We’ve worked in hotels as well as homes and businesses.
Maryton: your questions answered
Do you cover Maryton for gutter sealing?
Yes. We work across all of Scotland, and Maryton is part of that. You can drop us a line at info@mrmastic.co.uk and tell us what needs doing.
Do you cover smaller places like Maryton?
Yes, Maryton is covered. We work across all of Scotland, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you offer different sealant colours?
We will suggest a colour to suit the surroundings, from white and clear to greys and other shades. The product needed can limit the range.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
How do I get a quote for gutter sealing in Maryton?
It depends on the job, so we quote each one individually. For a quick quote, drop us a line at info@mrmastic.co.uk and tell us what needs doing and where.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in.
Do you clean gutters?
The joints we seal are cleaned out and any debris nearby is cleared. Cleaning the whole run is a different job.
Can you reach high gutters?
Single-storey work is the most straightforward. We’ll confirm the access for higher gutters before we book.
DIY versus a professional finish
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.
Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it peels away and traps moisture behind it. Everything old must be removed first.
Looking after it afterwards
Looking after new joints is easy:
- Get a dropping gutter looked at quickly
- Watch for drips in a downpour
- Look for streaks or damp on the wall below gutters
- Keep the gutters clear of debris
A sagging gutter needs its brackets checked. Movement will pull the joints open again.
Rain getting in round a garage door frame can damage what’s stored inside. Resealing the frame is a quick job.
How it works
On the day, we look over the joints with you first, so there are no surprises. Surfaces next to the work are protected before we start. The work normally takes an hour or two for a few joints, longer for a full run. For a place like Maryton, longer drives are planned in advance. Mention tracks, gates, ferries or anything else about the route.
- We start by tracing the leak and checking the gutter itself is sound.
- The joint or trim is cleaned out and old sealant removed.
- The joint is dried, because sealant will not bond to a wet surface.
- We seal the joint with a sealant made for gutters and outdoor use.
- We look along the gutter and clear debris around the joints.
Getting ready for the visit
- Tell us about access, such as stairs, a lift or high-level joints
- Let us know if you’ve seen damp or leaks
- Clear items away from the joints we are working on
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we’ll talk you through the work and send you a clear quote.
Read more
What the job involves on each surface
Gutter end caps
We seal end caps from the inside where we can reach, after cleaning and drying.
Gutter joints
Most gutter leaks start at a joint between sections. They’re cleaned out, dried and resealed.
Maryton buildings and the weather
Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and sound outside sealant is part of that. Harled (roughcast) walls are common in Scotland, and joints where harling meets other materials need a sealant that can grip and flex.
Around Maryton, as everywhere, gutter sealing is only as good as the preparation behind it. In the older streets around St Andrew's Church, an extension built onto an older house moves differently, and the joint between them takes the strain.
Maryton is about 4 miles west of Forfar, in Angus. From the centre of Maryton to the outskirts, gutter sealing is available for homes and businesses alike. Maryton is one of 40 places in Angus where we work. Our Dundee page covers work nearby (13 miles or so).
Postcode districts we cover here for gutter sealing: DD8. Whether your property is on Mid Row, Forfar Road and Third Row or anywhere close by, we can help. Other places close to Maryton include Kirriemuir (1 mile north-west), Westmuir (2 miles west), Padanaram (2 miles south-east), Douglastown (4 miles south-east) and Glamis (4 miles south). Further out, we also cover Carnoustie (15 miles south-east), Brechin (13 miles east), Hunter's Town (15 miles south-east), Gardynebourg (15 miles south-east), Letham (9 miles east) and Friockheim (13 miles east).
Landmarks near Maryton
We work in homes and buildings around Roods Bar and the streets around them. Nearby you’ll also find Kirriemuir Gateway to the Glens Museum (0.7 miles north-west) and Inverquharity Castle (3.1 miles north). Open spaces near Maryton include Loch of Kinnordy and Mile Hill.