Hampshire · England
King's Somborne Gutter Sealing
Gutter sealing across King's Somborne and nearby, with old sealant always removed completely and a 12-month guarantee.
- Internal damp traced to a gutter joint
- End caps that drip every time it rains
- Trim joints where the sealant has failed
About our gutter sealing in King's Somborne
A lot of gutter leaks come down to one tired joint. We clean out the joint, dry it and reseal it using a gutter sealant. If the gutter itself has failed, we say so. If you’re dealing with old sealant on roofline trims that has split and water dripping where gutter sections meet, we can help.
In a village or hamlet like King's Somborne, older cottages and farm buildings often stand in the open, where walls and rooflines take the weather head on. Joints on those walls need a sealant that moves with the building and stays in place.
Each job carries a 12-month guarantee, whatever its size.
- Where
- King's Somborne (SO20)
- Wider area
- Hampshire
- Cover
- 12 months on all our work
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
Gutter sealing in King's Somborne: local notes
With historic houses such as Mottisfont Abbey (about 3.2 miles south-west) nearby, there’s older building stock in the area around King's Somborne as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material. Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
For landlords with property near Mottisfont & Dunbridge station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. For an older house near a landmark such as Church of St Peter and St Paul, older walls, gutters and the joints where extensions meet them need a flexible sealant.
King's Somborne is about 6 miles north of Romsey, in Hampshire. Across the SO20 area, we cover gutter sealing for homes and businesses. Our area takes in 683 places across Hampshire, from the larger towns to small villages. Our Southampton page covers work nearby, about 12 miles away.
All of SO20 is covered for gutter sealing. Gutter sealing is available to properties on Church Road, Old Palace Farm and Forge Close and the roads around them. Being close to the A3057, King's Somborne is easy for our applicators to reach. Other places close to King's Somborne include Ashley (1 mile east), Little Somborne (2 miles north-east), Up Somborne (2 miles north-east), Braishfield (4 miles south) and Lower Slackstead (4 miles south-east). Within a short drive, we also cover Winchester (7 miles east), Eastleigh (10 miles south-east), Andover (9 miles north), Totton (11 miles south), Chandler's Ford (8 miles south-east) and Hedge End (14 miles south-east).
Near you in King's Somborne
We work in homes and buildings around The Crown Public House, among other places. For rail, the closest station is Mottisfont & Dunbridge station, about 4 miles south-west of the centre. Well-known places in the area include Romsey Community Hospital (5.8 miles south).
The process
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes an hour or two for a few joints, longer for a full run. Somewhere like King's Somborne needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- First we agree which joints need sealing.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- We check our work before we leave.
How to prepare
- On commercial sites, let us know about site rules
- Where the joints are inside, avoid wetting them before we arrive
- Let us know if you’ve seen damp or leaks
Get a quote
Need a quote? Please phone 0345 464 0079 or email us with a few details. You will know what we plan to do, and what it will cost, before any work begins.
Related advice
Landlords, agents and businesses in King's Somborne
A neglected joint can let water reach the structure, which is a bigger problem in a rented property. Keeping joints in good order is simple maintenance.
For anyone letting property in or around King's Somborne, several properties can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
When it is not the sealant
Before booking, it’s worth knowing the limits:
- Problems with the roof covering
- Fascias that need replacing
- Cracked, split or warped gutter sections
If in doubt, call 0345 464 0079 or send us an email and we will say what we think.
Where we work in King's Somborne
- Gutter joints
- Garage door frames
- Roofline trims
- uPVC fascias
- Gutter end caps
- Soffit joints
Also near King's Somborne
More services for King's Somborne
How the job changes by surface
Garage door frames
A fresh seal around the frame stops rain getting in.
Roofline trims
We seal the trims, not the roof. Roofing problems need a roofer.
What we’re called out for in King's Somborne
Debris in the gutter keeps water sitting at the joints. Standing water finds the weakest joint and leaks out.
The most common problems we see are:
- Water dripping where gutter sections meet
- End caps that drip every time it rains
- Old sealant on roofline trims that has split
- Wet patches on the wall under a gutter joint
For site and facilities teams at buildings such as King's Somborne Church of England Primary School, larger buildings have long runs of movement joint that eventually need resealing.
Before booking anyone
- What insurance they hold
- How long the guarantee is
- How the surfaces are prepared before sealing
- Whether they seal over old material or remove it
King's Somborne: your questions answered
Do you work for landlords with property near Mottisfont & Dunbridge station?
Yes, rental work is part of what we do. You can call 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
Is King's Somborne within the area you cover?
Yes, King's Somborne is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do you do commercial work?
Yes. We work in offices, washrooms, hotels and other commercial premises. We can talk about working times when we quote.
Is it possible to stop a gutter joint dripping with sealant?
Most of the time. If the gutter is sagging or cracked, sealing will not last, and we’ll tell you.
When is the sealant fully cured?
That depends on the sealant used, so please follow the time we give you.
What do you put in the joint?
Products from Arbo and Everbuild, among others, picked for each joint. We will tell you what we’re using and why.
Should I try DIY first?
That depends on the joint. High-level, external movement and fire-rated joints are professional jobs, while a short indoor joint may be within reach.
Is gutter cleaning part of the job?
Only around the joints we seal because the joint must be clean. Cleaning the whole run is a separate job.
Quotes for gutter sealing in King's Somborne
You will get a clear quote before we start. It takes into account:
- How many areas need sealing
- Access and height
- The type of sealant required
- Any working-time requirements on site
What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts.
What to tell us for a quote
There’s no need for technical detail. It helps if you can tell us:
- Whether it’s a home or a business
- Pictures of the joints, sent by email
- Roughly how big the job is
- Any previous sealing or DIY work
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we’ll come back to you with a quote.
DIY sealant or a professional job?
Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.