Kent · England
Gutter, fascia & soffit sealing in Ickham, Kent
Professional gutter sealing in and around Ickham, with every bit of old sealant taken out first and a 12-month guarantee.
- Damp on an inside wall under a dripping gutter
- Cracked sealant along roofline trims
- Failed sealant on a garage door frame
How we handle gutter sealing in Ickham
A leaking gutter joint marks the wall and wets the ground underneath. Often a reseal is enough if the gutter is not damaged. We work on gutter joints, uPVC fascias and soffit joints, and the jobs we see most are rain getting in around a garage door and quick sealant fixes on gutters that didn’t last.
In a village or hamlet like Ickham, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
Big or small, it’s backed by our 12-month guarantee.
- Where
- Ickham (CT3)
- Wider area
- Kent
- Guarantee
- A year, on every job
- Price
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
What affects the cost of gutter sealing
You will get a clear quote before work begins. It takes into account:
- Working hours on commercial sites
- Whether the work is at height
- The size of the job
- The number of rooms or windows
Doing several joints on one visit normally makes better use of the time than several visits. You’ll get one clear quote for the whole job.
What we need to know
To help us quote quickly, let us know:
- If someone has resealed it before
- Where the job is, and your postcode
- If it’s domestic, commercial or a hotel
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or email us if that is easier. Describe what needs sealing and we’ll explain what’s involved.
DIY versus a professional finish
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and getting the depth right matters as much as the look.
If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so tell us about it when you ask for a quote.
Gutter sealing in Ickham: local notes
Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast. Historic houses like Goodnestone Park (about 3 miles south-east) are a reminder that the area around Ickham has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth.
Managing a site like Wickhambreaux Church of England Primary School? Then larger buildings have long runs of movement joint that eventually need resealing. If you let a flat or house near Bekesbourne station, leaking gutter joints on a rental are best caught before they stain the walls. For an older house near a landmark such as Church of St John, old and new materials meet at the roofline and walls, which is where sealant earns its keep.
Ickham is about 4 miles east of Canterbury, in Kent. Homes, rented property, offices and hotels in Ickham is covered for gutter sealing. The work is guaranteed for a year. Our Kent coverage runs to 922 places, Ickham among them. Our Chelmsford page covers work nearby.
We cover every part of the CT3 postcode area for gutter sealing and the streets around it. Whether your property is on The Street, School Lane and Baye Lane or a nearby road, we can help. If you are just outside Ickham, we cover Wickhambreaux (1 mile north), Seaton (1 mile north-east), Littlebourne (1 mile west), Bramling (1 mile south-east) and Bekesbourne (2 miles south-west). Within a short drive, we also cover Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (13 miles south), Ramsgate (11 miles north-east) and Broadstairs (12 miles north-east).
Landmarks near Ickham
Around Ickham, our work takes us to homes and buildings near The Rose Inn and the streets around them. The nearest railway station is Bekesbourne station, about 2.3 miles south-west of the centre. Nearby you will also find Canterbury Castle (4.7 miles west) and St Martins Hospital (3.3 miles west).
What we do, step by step
Most of a good job is in the preparation, so that’s where we spend the time. Every joint is cleaned and dried before new material goes in. All told, the work takes a few hours, depending on the number of joints and the access. Somewhere like Ickham needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- We clean out each joint.
- We make sure everything is dry.
- We apply exterior or gutter sealant and finish it neatly.
- The joints are checked once sealed.
Preparing for the visit
- For indoor joints, keep the area dry beforehand if you can
- Tell us about any water getting in
- Tell us if parking is tricky
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Advice
Nearby places to Ickham
More services for Ickham
Surface by surface
Gutter end caps
A leaking end cap sends water straight down the wall. It’s a quick reseal.
Gutter joints
Most gutter leaks start at a joint between sections. They’re cleaned out, dried and resealed.
When it isn’t the sealant
Some problems need a builder, plumber or other trade rather than us:
- Sagging gutters or broken brackets
- Roof leaks, slipped tiles or failed flashing (a roofer’s job)
- Rotten or damaged fascia boards
If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer.
Surfaces we seal
- Garage door frames
- Gutter joints
- Roofline trims
- uPVC fascias
- Gutter end caps
- Soffit joints
Landlord and commercial work in Ickham
From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
Housing providers, facilities teams and property managers book us too. Several sites can be quoted together.
Why deal with it now?
New gutters cost far more than a few resealed joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. Where a wall is exposed, as many are in small places like Ickham, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Leaving a failed joint generally makes the job bigger, not smaller, because water and mould keep working on it. If you are unsure, ring 0345 464 0079 or drop us an email for an honest opinion and a quote.
Why us?
- We agree the colour with you first
- We’re fully insured
- Arbo and Everbuild products
- Colour picked to suit the job
Read our cost guide or customer reviews.
Ickham questions
Can you do gutter sealing in Ickham?
Yes, Ickham is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or email us and tell us what needs doing, and we will give you a clear price.
Will you come out to Ickham?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Is gutter cleaning part of the job?
We clear debris near the joints because the joint must be clean. Cleaning the whole run is a separate job.
Can you seal over the old sealant?
No. We remove every bit of old sealant first, so the new joint bonds to clean surfaces.
Do you work for landlords and businesses?
Yes. We work for householders, landlords, letting agents, businesses and hotels in Ickham.
Is there any odour?
That depends on the sealant. Some smell for a while, some hardly at all, and any smell fades as they cure.
When is the sealant fully cured?
That depends on the sealant used, so please follow the time we give you.
What sealant do you use?
Quality sealants from brands including Arbo and Everbuild, chosen to suit the joint. We explain the product when we quote.