West Sussex · England

Gutter Sealing in Hickstead

Professional gutter sealing in and around Hickstead, with every bit of old sealant taken out first.

  • Trim joints where the sealant has failed
  • Garage door frames letting rain in
  • Stop ends leaking at the end of a run

Book gutter sealing in Hickstead

Gutter sealing in Hickstead

A drip at a gutter joint is easy to ignore, but the water lands on the same spot every time it rains. Sealing it is quick while the gutter is still sound. We work on soffit joints, uPVC fascias and gutter joints, and common reasons people get in touch are stop ends leaking at the end of a run and old gutter sealant that has let go.

Older homes in small places like Hickstead may be stone, brick or timber-framed, often with later extensions. Where one material meets another is where water usually gets in, and they need the right sealant at the right depth.

Our work is backed for twelve months.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Location
Hickstead (RH17, BN6)
Wider area
West Sussex
Guarantee
A year, on every job
Quote
A clear price before we start
Phone
0345 464 0079
Updated
26 October 2026

How the visit works

There’s no need to move everything out before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours, depending on the number of joints and the access in most cases. For a village or hamlet like Hickstead, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. First we trace the drip and check the gutter is not damaged.
  2. We remove the old sealant and clean the joint.
  3. The joint is dried before sealing.
  4. A gutter sealant is applied to the joint.
  5. We check the run and clear debris near the joints.

How to prepare

  • Clear items away from the joints we’re working on
  • On commercial sites, let us know about site rules
  • Try not to wet indoor joints just before the visit

Get a quote

Want a quote for gutter sealing? Please call 0345 464 0079 or send us an email and tell us about the job. We’ll explain what we’d do and give you a clear price before we start.

Ask for a quote

Read more

Why it’s worth doing now in Hickstead

New gutters cost far more than a few resealed joints. Where the gutter is in good order and only a joint leaks a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. Where a wall is exposed, as many are in small places like Hickstead, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

There are no prices on our website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we will talk you through it.

Why book with us

  • 12-month guarantee on every job
  • White, clear, grey or another colour, product permitting
  • Tidy, careful work
  • Quality sealants from Arbo and Everbuild

See our cost guide or what customers say.

Common problems we fix in Hickstead

A sealant applied to a damp or dirty joint won’t bond. Some quick repairs peel off within a season or two for this reason.

People generally contact us after spotting something like this:

  • Failed sealant on a garage door frame
  • Leaking gutter joints and stop ends
  • Streaks down the brickwork from a leaking joint
  • Damp patches inside below a leaking gutter

For landlords with property near Burgess Hill station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside.

What to look for in a quote

  • Whether they seal over old material or remove it
  • Whether VAT is included
  • What guarantee comes with the work
  • Are they insured?

How to choose a mastic man

How the job changes by surface

Garage door frames

A fresh seal around the frame stops rain getting in.

Roofline trims

Trim joints are cut out and resealed suited to the material.

Hickstead buildings and the weather

With historic houses such as Ockenden Manor (about 3.4 miles north-east) nearby, there’s older building stock in the area around Hickstead as well as newer homes. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. London and the South East are among the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you live in an older home near The Parish Church of St Peter, old and new materials meet at the roofline and walls, which is where sealant earns its keep. If you look after a building such as Twineham CofE Primary School, its movement joints, gutters and trims need looking after like any other building’s.

Hickstead is about 3 miles west of Burgess Hill, in West Sussex. Wherever you are in the RH17 postcode area, we cover gutter sealing for homes and businesses. Our West Sussex coverage runs to 371 places, and Hickstead is one of them. There’s also a page for Crawley, roughly 10 miles from Hickstead.

We work across the RH17 and BN6 postcode area for gutter sealing and the streets around it. Close by, we work in Goddards Green (1 mile east), Sayers Common (1 mile south), Abbotsford (2 miles east), Ansty (2 miles north-east) and Hurstpierpoint (2 miles south). Larger places within reach include Crawley (10 miles north), Horsham (9 miles north-west), Worthing (13 miles south-west), Haywards Heath (5 miles north-east), Burgess Hill (3 miles east) and East Grinstead (14 miles north-east).

Landmarks near Hickstead

In Hickstead, that means homes and buildings near St Paul's Catholic College and the streets around them. For rail, the closest station is Burgess Hill station, about 3.1 miles east of the centre. A little further out are The Dene Hospital (1.3 miles east) and Clayton Castle (4.6 miles south-east). For a walk, there’s Wolstonbury Hill and Bedelands Farm Nature Reserve.

Map of Hickstead © OpenStreetMap contributors

Landlords, agents and businesses in Hickstead

If you manage several properties in or around Hickstead, jobs at different addresses can be quoted together. Send us the addresses and the work at each.

Hotels need rooms back in use, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.

What we cannot put right

Sealant isn’t the answer to every problem, and we’d rather say so up front. It will not solve:

  • Rotten or damaged fascia boards
  • Guttering that needs replacing
  • Problems with the roof covering

Not sure which it is? You can call 0345 464 0079 or email us and we’ll tell you honestly before you book.

Where we work in Hickstead

  • Gutter joints
  • Soffit joints
  • Gutter end caps
  • Roofline trims
  • uPVC fascias
  • Garage door frames

Common questions in Hickstead

Do you cover smaller places like Hickstead?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Do you work for landlords with property near Burgess Hill station?

Yes, we work for letting agents and landlords. Just call 0345 464 0079 or email us and tell us about the property, and we will send you a clear quote.

Can a leaking gutter joint be sealed?

Normally, if the gutter is sound. The joint is cleaned and dried first so the seal holds.

Does someone need to be in?

If the work is inside, we need someone to let us in. Once we’ve agreed the job, you don’t need to watch us work.

Do you work on high-level gutters?

That depends on the building. Let us know the height and the ground below and we’ll confirm what’s needed.

Do you have insurance?

Yes. We are fully insured, with over 20 years’ experience in sealant work.

Can I add another job to the visit?

Of course. Combining jobs makes good use of the visit, so mention them when you ask for a quote.

What sealant do you use?

Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference, and we will tell you what we are using.

DIY sealant or a professional job?

If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.

If you’ve already had a go yourself, that is fine. We remove it and do the joint properly, so just mention it when you contact us.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job