Hampshire · England
Gutter, fascia & soffit sealing in Colbury, Hampshire
Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims in Colbury, with a 12-month guarantee on every job. Call for a quick quote.
- Trim joints where the sealant has failed
- Water dripping where gutter sections meet
- Quick sealant fixes on gutters that didn’t last
Colbury buildings and the weather
Colbury is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on gutter, fascia and roofline joints, which can dry out and crack sooner where a building faces the weather. With historic houses such as Southampton Tudor House and Garden (about 4.3 miles east) nearby, there’s older building stock in the area around Colbury as well as newer homes. In older buildings, older walls and rooflines need a sealant that moves with them and suits the material.
For landlords with property near Ashurst New Forest station, a dripping gutter joint or loose fascia trim is easy to miss until damp shows inside. Schools such as Foxhills Infant School are buildings too, and larger buildings have long runs of movement joint that eventually need resealing.
Colbury is about 1 mile south of Totton, in Hampshire. If you need gutter sealing in Colbury, it’s easy to get a quote: please ring 0345 464 0079 or drop us an email. We cover Hampshire from our Crawley base. 683 places in Hampshire are on our list, from the larger towns to small villages.
Every address in SO40 is within our area for gutter sealing. Close by, we work in Ashurst (1 mile west), Lyndhurst (4 miles south-west), Emery Down (4 miles south-west), Balmerlawn (6 miles south-west) and Brockenhurst (6 miles south-west). We also work in nearby towns such as Winchester (14 miles north-east), Eastleigh (8 miles north-east), Fareham (14 miles east), Chandler's Ford (8 miles north-east), Hedge End (9 miles east) and Lymington (10 miles south).
What’s near Colbury
Locally, jobs take us to homes and businesses close to Hounsdown School and The Forest Inn and the streets around them. The nearest railway station is Ashurst New Forest station, roughly 1.2 miles south-west. Well-known places in the area include Ashurst Hospital (1 mile south-west) and National Dairy Museum (less than half a mile south). For a walk, there’s Testwood Lakes.
Gutter sealing in Colbury, done properly
It’s easy to live with a dripping gutter joint, but the water lands on the same spot every time it rains. Sealing it is quick if the gutter is otherwise in good order. We work on gutter joints, uPVC fascias and roofline trims, and people most often call us about wet patches on the wall under a gutter joint and trim joints where the sealant has failed.
In a village or hamlet like Colbury, older cottages and farm buildings often stand in the open, so walls and rooflines take the full force of wind and rain. Gutter joints and wall joints there need a sealant that can flex and stay put.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we will sort it.
- Place
- Colbury (SO40)
- Wider area
- Hampshire
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
How we quote for gutter sealing
We don’t publish a price list, because no two jobs are the same. The quote depends on:
- Access and height
- How much old sealant there is and how hard it is to remove
- When we can work, for business premises
- How many rooms, windows or areas are involved
We don’t show prices on the website, because each job is priced on what it involves. For a quick quote, please ring 0345 464 0079 or drop us an email.
Asking for a quote
When you call or email, it’s useful to know:
- Any previous sealing or DIY work
- The type of property
- How we’d reach the joints
- Photos by email, if that’s easy
For gutter sealing in Colbury, phone 0345 464 0079 or email us. Tell us what the problem is and where, and we’ll agree the price before any work begins.
When to call us in Colbury
A sealant applied to a damp or dirty joint won’t bond. Some quick repairs peel off within a season or two.
People normally contact us after spotting something like this:
- Damp on an inside wall under a dripping gutter
- Leaking gutter joints and stop ends
- Trim joints where the sealant has failed
- Quick sealant fixes on gutters that didn’t last
If you live in an older home near Colbury Christ Church, an extension built onto an older house moves differently, and the joint between them takes the strain.
Questions to ask before booking
- How the colour is chosen
- What happens if the job turns out different
- What preparation is included
- Are they insured?
What we do, step by step
Every visit runs the same way: we look at the joints together, protect the area around them, carry out the job and tidy away. It usually takes an hour or two for a few joints, longer for a full run. In a small place like Colbury, access is usually the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We look at the gutters, fascias and trims and agree the joints to seal.
- We clean out each joint.
- The joints are dried.
- The sealant is applied and finished.
- We check our work before we leave.
Before we arrive
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
- Tell us about access, such as stairs, a lift or high-level joints
Get a quote
Getting a quote is simple: let us know the job and the location and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.
Advice
Colbury: your questions answered
Will you come out to Colbury?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
I let a flat near Ashurst New Forest station. Can you help?
Yes, rental work is part of what we do. You can ring 0345 464 0079 or send us an email with the address and a few details, and we’ll give you a fixed price before any work starts.
Do you install new fascias or gutters?
No. We seal leaking joints, end caps and trims. Replacement needs a gutter installer or roofer.
Can new sealant go over the old?
No, and we never do. It can look neat for a few weeks, but the new bead soon lifts. The old sealant has to come out completely.
Is the work guaranteed?
You get our 12-month guarantee to all our work.
What about gutters on a second or third storey?
Single-storey and low-level gutters are straightforward. If it’s higher up, let us know and we’ll confirm the access.
Where do you work from?
We are based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all.
How to look after the new joints
After the cure time, these simple habits help:
- Rest ladders on the wall, not the gutter
- Do not leave a sagging gutter
- Glance at the soffit joints now and then
- Get leaks sealed before the wet months
Leave the new sealant to cure as we advise before poking or cleaning near it.
Early sealing limits how much water hits the wall. We will let you know if the gutter needs more than sealant.
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- Sagging gutters or broken brackets
- Water backing up from a blocked pipe
- Rotten or damaged fascia boards
Not sure which it is? You can phone 0345 464 0079 or drop us an email and we’ll tell you honestly before booking.
What we seal
- Gutter joints
- Garage door frames
- Gutter end caps
- uPVC fascias
- Soffit joints
- Roofline trims
Should I try it myself first?
A DIY attempt does not rule out a professional job. We cut it out and start again.
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
Surface by surface
Roofline trims
Roofline trims rely on sealant at their joints. Split sealant lets water in.
Soffit joints
Soffit joints are sealed in a colour to suit.