East Sussex · England
Gutter, fascia & soffit sealing in Broad Street, East Sussex
We cover Broad Street for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old sealant removed completely, joints prepared properly.
- Earlier gutter repairs that have peeled off
- Leaking gutter joints and stop ends
- Stop ends leaking at the end of a run
When something else is needed
Before you book, it’s worth knowing the limits:
- Brackets that have snapped or loosened
- Cracked, split or warped gutter sections
- Downpipes that are blocked or broken
If you are not sure, just call 0345 464 0079 or send us an email and we will give you a straight answer.
What we seal
- Gutter joints
- Garage door frames
- Gutter end caps
- Soffit joints
- Roofline trims
- uPVC fascias
Gutter sealing in Broad Street
A leaking gutter joint marks the wall and wets the ground underneath. Often a reseal is enough if the gutter is not damaged. We’re often asked to deal with wet patches on the wall under a gutter joint and old sealant on roofline trims that has split, across gutter end caps, gutter joints and roofline trims.
Around Broad Street, older buildings can be stone, brick or timber-framed, many with extensions added later. The joints where those materials meet are the weak points, and they need the right sealant at the right depth.
The work is guaranteed for twelve months. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Where
- Broad Street (TN36)
- Wider area
- East Sussex
- Cover
- A year, on every job
- Quote
- Quoted before any work starts
- Telephone
- 0345 464 0079
- Last updated
- 26 October 2026
Surface by surface
Gutter end caps
End caps are resealed where they meet the gutter, after cleaning and drying.
Soffit joints
Soffit joints are sealed in a colour to suit, where one is available.
Can I do it myself?
What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, and the work is guaranteed for a year.
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it doesn’t work out, we can still put it right.
Landlords, agents and businesses in Broad Street
Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.
In hotels, rooms out of use cost money, so we plan the work room by room. We’ve worked in hotels as well as homes and businesses.
How the visit works
Most of a good job is in the preparation, and we don’t rush it. Joints are cleaned back and dried before anything new goes in. All told, the work takes anything from an hour or two to a few hours. For a village or hamlet like Broad Street, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We look at the gutters, fascias and trims and agree the joints to seal.
- Each joint is cleaned and any old sealant removed.
- The joints are dried.
- We apply exterior or gutter sealant and finish it neatly.
- We check our work before we leave.
Getting ready for the visit
- Let us know if you’ve seen damp or leaks
- Mention any tricky access
- For indoor joints, keep the area dry beforehand if you can
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints.
Related advice
Signs you need gutter sealing in Broad Street
Leaves and moss hold water in the gutter. Standing water finds the weakest joint and leaks out.
People usually contact us when they notice one of these:
- Failed sealant on a garage door frame
- Dripping gutter ends
- Old gutter sealant that has let go
- Internal damp traced to a gutter joint
If you look after a building such as Icklesham Church of England Primary School, movement joints, cladding joints and gutters on larger buildings need the same care as a house’s.
What to look for in a quote
- Whether they’re fully insured
- Which colour the sealant will be
- Who turns up on the day
- What happens if they find a problem under the old sealant
Gutter sealing in Broad Street: local notes
Broad Street is within about 3 miles of the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That is hard on gutter, fascia and roofline joints, especially on the side facing the sea. Historic houses like Lamb House (about 4.1 miles north-east) are a reminder that the area around Broad Street has older buildings as well as new. In older buildings, older brick and stone need a sealant that suits them, at the right joint depth.
For landlords with property near Doleham station, leaking gutter joints on a rental are best caught before they stain the walls. For an older house near a landmark such as The Parish Church of St Nicholas, older walls, gutters and the joints where extensions meet them need a flexible sealant.
Broad Street is about 5 miles north-east of Hastings, in East Sussex. If you need gutter sealing in Broad Street, please call 0345 464 0079 or send us an email for a quick quote. We are based in Crawley and cover East Sussex. Our area takes in 289 places across East Sussex, from the larger towns to small villages. For nearby work, see our Brighton page (35 miles or so).
Jobs for gutter sealing in TN36 is quoted and booked the same way as anywhere else. Nearby, we also carry out gutter sealing in Icklesham (1 mile east), Udimore (1 mile north), Cock Marling (2 miles north-east), Three Oaks (2 miles south-west) and Broadland Row (2 miles north-west). Larger places within reach include Hastings (5 miles south-west), Bexhill-on-Sea (9 miles south-west), St Leonards (6 miles south-west), Hastings Old Town (5 miles south-west), Belmont (5 miles south-west) and Hollington (5 miles south-west).
What’s near Broad Street
The closest station to Broad Street is Doleham station, roughly 1.8 miles west of the centre. Other landmarks nearby include Camber Castle (3.7 miles east) and Winchelsea Court Hall Museum (2.5 miles east). Not far away are Flatropers Wood.
Why deal with it now?
New gutters cost far more than a few resealed joints. If the gutter is sound and the drip is a joint a reseal is all it needs. If it’s broken or sagging, a gutter installer needs to look. Around Broad Street, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
Instead of a standard rate, we price the job in front of us: how many joints, what’s in them now and how we reach them. You’ll know the price before we begin.
What you get with us
- ARBOMaster approved applicator
- A choice of colours where the product allows
- 20+ years of sealant experience
- Colour picked to suit the job
Read what affects the cost or what customers say.
Nearby places to Broad Street
What else we do in Broad Street
FAQs for Broad Street
I let a flat near Doleham station. Can you help?
Yes, we work for letting agents and landlords. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before any work starts.
Is Broad Street within the area you cover?
Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
What information do you need?
Let us know what needs doing and where. We’ll ask anything else we need to know.
Do you guarantee gutter sealing?
You get our 12-month guarantee to all our work.
Is sealing fascia joints something you do?
Yes, often alongside gutter joints. The gaps are cleaned and sealed neatly with a suitable exterior sealant.
Do I need to be at home?
We need access to the joints, so we’ll agree that with you when we book. For inside work, that normally means someone being in.
Can I add another job to the visit?
Yes. Tell us about everything you’d like done and you will get one quote.
When is the sealant fully cured?
Different products cure at different speeds, so follow the cure time we give you.