Kent · England

Bearsted Gutter Sealing

We cover Bearsted for sealing leaking gutter joints, end caps, fascias, soffits and roofline trims. Old material cut out, joints cleaned and sealed neatly and a 12-month guarantee.

  • Stop ends leaking at the end of a run
  • Old sealant on roofline trims that has split
  • Drips from gutter joints and end caps

Trusted gutter sealing in Bearsted

Gutter sealing for homes and businesses in Bearsted

Gutter and fascia replacement is not our trade, and nor is roofing. What sealant does is close joints and it cannot mend broken brackets, split sections or blocked downpipes. We work on gutter end caps, soffit joints and uPVC fascias, and the jobs we see most are cracked sealant along roofline trims and stop ends leaking at the end of a run.

Houses in smaller places like Bearsted can stand more in the open than those in a built-up town, and walls and rooflines facing the weather take the worst of it. Joints on those sides are usually the first to go.

You’re covered for a year from the day we finish. If there’s a problem with it, please ring 0345 464 0079 or send us an email.

Outdoor mastic being applied where a white frame meets red brickwork, below the fascia and gutter
Place
Bearsted (ME14, ME15)
Wider area
Kent
Guarantee
One year on every job
Price
Quoted before any work starts
Telephone
0345 464 0079
Page updated
26 October 2026

What we do, step by step

There’s no need to move everything out before we come, only the area right around the joints. We protect the rest, and the job takes an hour or two for a few joints, longer for a full run in most cases. For a job in Bearsted, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. First we trace the drip and check the gutter is not damaged.
  2. The old sealant and dirt are cleaned out of the joint.
  3. The joint is dried before sealing.
  4. We seal the joint with a sealant made for gutters.
  5. The gutter is checked and debris around the joints cleared.

Getting ready for the visit

  • Let us know if you’ve seen damp or leaks
  • Tell us about any previous sealing or DIY attempts
  • On commercial sites, let us know about site rules

Ask for a quote

For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we’ll explain what’s involved before giving you a price.

Get a quick quote

Read more

Gutter sealing in Bearsted: local notes

Historic houses like Stoneacre (about 1.3 miles south) are a reminder that the area around Bearsted has older buildings as well as new. Where a home is older, older brick and stone need a sealant that suits them, at the right joint depth. The South East is one of the drier parts of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

If you look after a building such as Thurnham Church of England Infant School, larger buildings have long runs of movement joint that eventually need resealing. In the older streets around Holy Cross Church, older walls, gutters and the joints where extensions meet them need a flexible sealant.

Bearsted is about 2 miles east of Maidstone, in Kent. For gutter sealing in and around Bearsted, it’s easy to get a quote: please call 0345 464 0079 or email us. We cover Kent from our Crawley base. Bearsted is one of 922 places in Kent we cover. We also work in Chelmsford, about 32 miles from Bearsted.

Work in ME14 and ME15 is quoted and booked the same way as anywhere else. Local streets include The Street, Tower Lane and Roseacre Lane. We also cover the places around Bearsted: Weavering (1 mile west), Grove Green (1 mile north-west), Caring (1 mile south-east), Thurnham (1 mile north-east) and Willington (2 miles south-west). We also work in nearby towns such as Sittingbourne (9 miles north-east), Gravesend (14 miles north-west), Tonbridge (14 miles west), Faversham (14 miles east), Northfleet (15 miles north-west) and Minster (14 miles north-east).

Local landmarks in Bearsted

We work in homes and buildings around Mote Park, Valley Park School and The Kentish Yeoman pub. There’s a railway station in Bearsted itself: Bearsted station. Well-known places in the area include KIMS hospital (1.2 miles north-west) and The Mall Maidstone (2 miles west). Not far away are Detling Hill.

Map of Bearsted © OpenStreetMap contributors

Bearsted: your questions answered

Is Bearsted in your area for gutter sealing?

Yes. We work across London and the South East, and Bearsted is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll give you a clear quote.

Will you come out to Bearsted?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.

How long does the job take?

A typical job takes an hour or two for a few joints, longer for a full run, including preparation and clearing up. We will confirm how long when we quote.

Will you clear out my gutters?

We clear debris around the joints we are sealing. Full gutter cleaning is a separate job.

Can a leaking gutter joint be sealed?

Yes, as long as the gutter itself is in good order. We clean and dry the joint before sealing so the seal holds.

Do you install new fascias or gutters?

We don’t replace gutters or fascias. If a gutter is broken or sagging, we’ll tell you.

Can I do it myself?

You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. If it does not work out, we can redo it.

Do the sealants smell?

That depends on the sealant. Some smell for a while, some hardly at all.

What we can’t put right

To be straight with you, there are a few things sealant won’t fix:

  • Cracked, split or warped gutter sections
  • Blocked downpipes
  • Rotten or damaged fascia boards

If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.

Where we work in Bearsted

  • Gutter joints
  • uPVC fascias
  • Garage door frames
  • Roofline trims
  • Soffit joints
  • Gutter end caps

Can I do it myself?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is.

If you’re set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it does not work out, we can still put it right.

Landlords, agents and businesses in Bearsted

Whether it’s one flat or a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Letting agents often deal with us directly. Tell us the address, the job and how access works and we will give you a quote.

Why act early in Bearsted

A dripping stop end can soak the wall right through the wet months. It’s a small job to put right before the damage spreads. Around Bearsted, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.

Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.

Why choose Mr Mastic in Bearsted

  • Every job guaranteed for a year
  • We agree the colour with you first
  • Fully insured
  • More than 20 years in sealant work

See our cost guide or what customers say.

Common problems we fix in Bearsted

Sealant laid on a wet or dirty joint fails early. Rushed repairs often do not last long.

These are the problems we’re asked about most:

  • Water running down the wall below the gutter
  • Leaking gutter joints and stop ends
  • Rain getting in around a garage door
  • Earlier gutter repairs that have peeled off

If you let a flat or house near Bearsted station, leaking gutter joints on a rental are best caught before they stain the walls.

Questions to ask before booking

  • Which colour the sealant will be
  • How long to leave it before use
  • Who turns up on the day
  • How long the guarantee is

Our hiring checklist

Looking after it afterwards

To keep the joints looking good and working properly:

  • Watch the wall under the gutters for staining
  • Sort out a dripping joint early
  • Keep the gutters clear of debris
  • Look at the gutters while it’s raining

Make sure downpipes are not blocked so the gutter can drain. Blockages push water back along the gutter.

A leaking stop end is best sealed before the wet months. A winter of drips can lead to damp patches.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job