Kent · England

Alkham Gutter Sealing

Sealing leaking gutter joints, end caps, fascias, soffits and roofline trims in Alkham, with a one-year guarantee on every job. Ask us for a quote.

  • End caps that drip every time it rains
  • Old gutter sealant that has let go
  • Rain getting in around a garage door

Gutter sealing in Alkham

Looking after it afterwards

Once the sealant has cured, a few habits help it last:

  • Have sagging gutters refixed early
  • Watch the wall under the gutters for staining
  • Sort out a dripping joint early
  • Do not lean ladders against the gutter itself

Check the joints after heavy rain now and then. It’s the easiest time to see a leak.

If an end cap is dripping, deal with it before winter. A winter of drips can lead to damp patches.

Gutter sealing for homes and businesses in Alkham

Across Alkham, we reseal gutter joints, end caps and roofline trims. Single-storey and low gutters are simple to reach and if it’s higher up, let us know and we’ll confirm what access is needed. If you’re dealing with gaps along fascia and soffit joints and damp on an inside wall under a dripping gutter, we can put it right, whatever the surface.

Somewhere as small as Alkham, homes and farm buildings often face open ground, where walls and rooflines take the weather head on. Gutter joints and wall joints there need a sealant that can flex and stay put.

We stand behind the work with a 12-month guarantee, so you’re covered after we’ve gone.

Applicator reaching up to seal an external door frame on a sunny day
Location
Alkham (CT15)
Region
Kent
Cover
A year, on every job
Quotes
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026

What affects the cost of gutter sealing

Call for a quick quote. What matters most is:

  • Access and height
  • Mould in or behind the old joints
  • The old material and how stubborn it is
  • The type of sealant required

A few things move the cost up or down: how much old sealant there is and how stubborn it is, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.

What to tell us for a quote

When you contact us, these details help:

  • Whether it has been sealed before
  • What the problem is, such as mould, gaps, leaks or cracking
  • A few photos by email, if you can
  • Roughly how big the job is

Want a quote for gutter sealing? Please call 0345 464 0079 or send us an email with a few details. We’ll explain what we’d do and give you a clear quote before any work starts.

For landlords and businesses

Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.

From a single let to a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.

Common questions in Alkham

Will you come out to Alkham?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Do you work for landlords with property near Kearsney station?

Yes. We work for landlords and letting agents as well as householders, and several properties can go on one quote. Just ring 0345 464 0079 or drop us an email with the address and what needs doing, and we will give you a clear price.

Which products do you use?

Products from Arbo and Everbuild, among others, chosen to suit the joint. We explain the product when we quote.

Is there any odour?

Possibly a little. Any smell clears as the sealant cures, and ventilation helps.

Do you remove the old sealant?

Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.

What do you need from me for a quote?

The location, the problem and the rough size of the job. If you can, email a few pictures.

How long does the job take?

Most jobs take an hour or two for a few joints, longer for a full run, including the preparation. We’ll confirm how long when we quote.

Do you work for hotels and businesses?

Yes. Larger jobs can be planned room by room or area by area to suit the site.

Walls and rooflines in Alkham

Alkham is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on gutter, fascia and roofline joints, especially on the side facing the sea. The South East is one of the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.

If you let a flat or house near Kearsney station, a gutter joint that drips onto the wall can turn into a damp complaint, so it’s worth checking. If you live in an older home near Church of St Anthony the Martyr, old and new materials meet at the roofline and walls, which is where sealant earns its keep.

Alkham is about 3 miles west of Dover, in Kent. Wherever you are in the CT15 postcode area, our applicators can take on gutter sealing. Across Kent, we cover 922 places, Alkham among them. Chelmsford is on our list too, about 52 miles from Alkham.

Here we cover the CT15 postcode area for gutter sealing. That includes homes and businesses on Alkham Valley Road, Hogbrook Hill Lane and Newlyn's Meadow. We also cover the places around Alkham: South Alkham (1 mile south-west), Chalksole Green (1 mile north-west), Ewell Minnis (1 mile north), Wolverton (1 mile north-east) and Drellingore (1 mile south-west). We also work in nearby towns such as Ashford (15 miles west), Canterbury (12 miles north-west), Dover (3 miles east), Folkestone (4 miles south-west), Deal (9 miles north-east) and Hythe (8 miles south-west).

Local landmarks in Alkham

Around Alkham, our work takes us to homes and buildings near Sladden Wood and the streets around them. For rail, the closest station is Kearsney station, about 2.3 miles north-east of the centre. Other landmarks nearby include Folkestone Castle (3.7 miles south-west) and Crabble Corn Mill (2.6 miles east). Not far away are Dover Western Heights and Sugar Loaf Hill.

Map of Alkham © OpenStreetMap contributors

Can I do it myself?

If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

What the job involves on each surface

Gutter joints

Joints between gutter lengths are the most common leak point. They’re cleaned out, dried and resealed.

Soffit joints

Open soffit joints let draughts in. We close them with a suitable sealant.

Why it’s worth doing now in Alkham

You do not need new fascias just because the joints have opened. Sealing the joints tidies them up as long as the boards are in good condition. In a small place like Alkham, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

What you pay reflects the work, not guesswork. That is why we ask a few questions first and agree the price before starting.

What you get with us

  • We agree the colour with you first
  • 12-month guarantee on every job
  • An ARBOMaster approved applicator
  • Anti-fungal sanitary silicone in wet areas

Take a look at our cost guide or what customers say.

How it works

All our tools and materials come with us in the van. Once we’ve agreed what’s being done, the area is protected and the work begins. It normally takes a few hours, depending on the number of joints and the access. In a small place like Alkham, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. First we trace the drip and check the gutter is not damaged.
  2. We remove the old sealant and clean the joint.
  3. We dry the joint so the new sealant can bond.
  4. A gutter sealant is applied to the joint.
  5. We check the run and clear debris near the joints.

How to prepare

  • Try not to wet indoor joints just before the visit
  • Mention if the joints have been sealed before
  • Let us know if you’ve seen damp or leaks

Ask for a quote

The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job