Kent · England
Glazing & conservatory sealant in Wittersham, Kent
Glazing silicone for conservatories, rooflights, glass panels and shower screens for homeowners, landlords and businesses in Wittersham. ARBOMaster approved applicators, fully insured, with a 12-month guarantee.
- Glazing silicone that has cracked or come away
- Water tracking down the inner face of the glass
- Failed sealant around rooflight glass
Glazing silicone for homes and businesses in Wittersham
A frameless shower screen depends on its silicone. Leaks generally come from the wall joint or the tray joint, and we reseal both. We are often asked to deal with a quick top-up bead that didn’t last and conservatory leaks at frame and glazing joints, across glass balustrade bases, conservatory frames and glass-to-glass joints.
Around Wittersham, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
Each job carries a 12-month guarantee, whatever its size.
- Where
- Wittersham (TN30)
- Region
- Kent
- Cover
- One year on every job
- Quotes
- A clear price before we start
- Call
- 0345 464 0079
- Last updated
- 26 October 2026
Honest limits
We will not take on work that won’t last, so these are the limits:
- A sealed unit that has misted inside
- A frame that needs repairing or replacing
- Cracked or broken glass
If in doubt, phone 0345 464 0079 or email us and we’ll say what we think.
Joints and surfaces we work on
- Glass-to-frame joints
- Glass-to-glass joints
- Rooflights
- Glass balustrade bases
- Shower screens
- Conservatory frames
Should I try it myself first?
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it fails, we can still redo it.
The biggest DIY mistake is sealing over old sealant. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
The process
The work is kept neat and contained to the joints we are treating. The job normally takes a few hours for most jobs. Somewhere like Wittersham needs a little journey planning: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Before we arrive
- Mention any leaks or damp you’ve noticed
- Keep children and pets away from the work area
- Mention if the joints have been sealed before
Ask for a quote
Call for a quick quote, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved before giving you a price.
Read more
Leave it or put it right?
A quick bead over the old sealant might stop a drip for a while, but new silicone won’t bond to old and water soon finds its way back. Cutting out and resealing properly lasts. Older cottages and farmhouses around Wittersham can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
There are no prices on our website, because the cost depends so much on the job itself. Call for a quick quote and we’ll talk you through it.
Why us?
- Rated 4.9 stars on Google
- A choice of colours where the product allows
- Fully insured
- ARBOMaster approved applicator
See what affects the cost or our reviews.
What glazing silicone looks like in Wittersham
With historic houses such as Smallhythe Place (about 1.6 miles north) nearby, there’s older building stock in the area around Wittersham as well as newer homes. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.
In the older streets around Parish Church of St John the Baptist, frames set in older brick or stone need a sealant that suits the wall as well as the frame. For site and facilities teams at buildings such as Wittersham Church of England Primary School, larger buildings have plenty of frames, and the mastic around each one ages. Rented homes near Rye station change hands often, and leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Wittersham is about 11 miles south-west of Ashford, in Kent. Across the TN30 area, we cover glazing silicone for homes and businesses. Across Kent, we cover 922 places, and Wittersham is one of them. Brighton is on our list too, about 38 miles from Wittersham.
We cover every part of the TN30 postcode area for glazing silicone. If you need glazing silicone at a property on The Street, Poplar Road and Swan Cottages or a nearby road, our applicators can take on the job. Wittersham is on the B2082, which makes it straightforward to reach with everything needed for glazing silicone. We also cover the places around Wittersham: Acton (1 mile north-east), The Stocks (1 mile east), Stone Corner (1 mile north-east), Reading Street (2 miles north-east) and Stone in Oxney (3 miles east). Within a short drive, we also cover Ashford (11 miles north-east), Tenterden (4 miles north), Kennington (13 miles north-east), New Romney (11 miles east), Staplehurst (12 miles north-west) and Stanhope (10 miles north-east).
What’s near Wittersham
We work in homes and buildings around The Swan pub, among other places. The closest station to Wittersham is Rye station, about 4.5 miles south. A little further out are Ypres Tower (4.8 miles south) and Smallhythe Place (1.6 miles north). Not far away are Flatropers Wood.
For landlords and businesses
Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Places near Wittersham
Also in Wittersham
What affects the quote in Wittersham
Every job gets its own quote. This is what makes a difference:
- The product the joint needs
- Working hours on commercial sites
- Access and height
- The number and length of the joints
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What to tell us for a quote
There’s no need for technical detail. Just tell us:
- If someone has resealed it before
- Access, such as stairs, a lift or height
- What’s wrong with the joints now
- A few photos by email, if you can
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.
Keeping the joints in good condition
To keep the joints looking good and working properly:
- Avoid scraping close to the bead
- Use gentle products around the joints
- Get a new leak looked at quickly
- Clear the conservatory gutters regularly
Look over the glazing joints every year or so. Spotting a crack early means a simpler fix.
Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we’ll tell you which.
Common questions in Wittersham
I let a flat near Rye station. Can you help?
Yes, landlords and agents are among the people we work for. Just phone 0345 464 0079 or email us with the address and what needs doing, and we will give you a clear price.
Do you cover smaller places like Wittersham?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Do you hold any approvals?
Yes. We’re approved under the ARBOMaster scheme, which is run for the Arbo sealant brand.
Is it worth trying it myself?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. Most DIY failures come from sealing over old material, wet joints or too much sealant.
Why not top up the existing silicone?
Silicone doesn’t stick to silicone and water gets between the layers. We cut out the old sealant first.
Do you do commercial work?
Yes. We have worked for hotels, offices and other businesses.
Do I need to be at home?
Access is agreed with you when the job is booked. For inside work, that normally means someone being in.
What sealant do you use on glazing?
We pick a glazing silicone to suit the materials. Neutral-cure silicone is the usual choice, as some acetoxy types can attack certain metals.