Hampshire · England

Glazing Silicone in Wells-in-the-Field

Specialist glazing silicone for Wells-in-the-Field: careful preparation, the right product and tidy work. Ask us for a quick quote.

  • Water tracking down the inner face of the glass
  • Shower screens leaking along the wall or tray
  • Leaking glazing joints on a rooflight

Glazing silicone for Wells-in-the-Field homes and businesses

Glazing silicone in Wells-in-the-Field, done properly

A frameless shower screen depends on its silicone. The joint down the wall and the one along the tray are common leak points and both get fresh anti-fungal silicone. If you’re dealing with failed sealant around rooflight glass and drips on the inside of a conservatory window, we can help, whatever the surface.

Homes in small places like Wells-in-the-Field often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.

All our work is covered by our 12-month guarantee, wherever you are in Hampshire.

Fresh white silicone going into the corner where a shower screen meets the tiled wall
Place
Wells-in-the-Field (RG28)
Region
Hampshire
Cover
A year, on every job
Quote
A clear price before work begins
Call
0345 464 0079
Page updated
26 October 2026

How to look after the new joints

Joint life depends on how it’s used and looked after. We suggest:

  • Inspect the sealant on glazing annually
  • Clear the conservatory gutters regularly
  • Stick to mild cleaners on glass
  • Open vents or windows to let moisture out

Keep the new joints dry for as long as we advise so the silicone can set properly. From then on, a mild glass cleaner is all it needs.

Shower screen leaks can go unnoticed. Water can soak into the floor or reach the room below long before you see it.

Should I try it myself first?

Too much sealant is as bad as too little. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.

What sealant work can’t fix

A few problems are outside what sealant work can do:

  • Misting between the panes of a double-glazed unit (a failed unit for a glazier)
  • Water coming through the roof rather than a sealant joint
  • A frame that needs repairing or replacing

If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think.

Joints and surfaces we work on

  • Shower screens
  • Rooflights
  • Glass-to-frame joints
  • Glass-to-glass joints
  • Conservatory frames
  • Glass balustrade bases

For landlords and businesses

From a single let to a portfolio, the work is the same standard: the old material taken out, careful preparation and a 12-month guarantee.

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

Questions from Wells-in-the-Field

Is Wells-in-the-Field within the area you cover?

Yes, smaller places are covered as well as towns. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Can you help a landlord with a rental near Whitchurch (Hampshire) station?

Yes, we work for letting agents and landlords. You can ring 0345 464 0079 or drop us an email with the address and a few details, and we’ll give you a fixed price before we start.

Can you just put new silicone over the old?

Topping up is a common cause of leaks. We remove the old silicone, clean the joint and reseal.

Do I have to be there?

It depends on the job. For work indoors, someone needs to let us in.

How much does glazing silicone cost in Wells-in-the-Field?

It depends on the job, so we quote each one individually. To get one, call 0345 464 0079 or drop us an email and tell us what needs doing and where.

Will it make a mess?

We keep the work tidy. We protect what’s around the joints, and the area is left clean when we finish.

Where do you work from?

Mr Mastic is based in Crawley. Our applicators cover Wells-in-the-Field.

Do you do commercial work?

Yes. We work in offices, washrooms, hotels and other commercial premises, as well as homes. We can talk about working times when we quote.

Do you need glazing silicone in Wells-in-the-Field?

Some conservatory leaks are not sealant at all: broken panels, roof problems and blocked gutters can all let water in. That is why we trace the leak first.

Keep an eye out for these signs:

  • Stained, discoloured glazing silicone
  • Water escaping where a screen meets the wall
  • Water getting into a conservatory at the joints
  • New silicone smeared over old sealant

For landlords with property near Whitchurch (Hampshire) station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.

What to look for in a quote

  • Which colour the sealant will be
  • How long the guarantee is
  • Who turns up on the day
  • Is the old sealant removed completely?

Choosing a sealant specialist

Frames and glazing around Wells-in-the-Field

Rainfall in the South East is lower than in much of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

In the older streets around St Nicholas' Church, replacement windows fitted into old openings often leave uneven gaps that need backing and a flexible joint. For site and facilities teams at buildings such as Whitchurch Church of England Primary School, larger buildings have plenty of frames, and the mastic around each one ages.

Wells-in-the-Field is about 7 miles east of Andover, in Hampshire. If you need glazing silicone in Wells-in-the-Field, it’s easy to get a quote: please call 0345 464 0079 or email us. We are based in Crawley and cover Hampshire. 683 places in Hampshire are on our list. We also work in Reading, about 21 miles from Wells-in-the-Field.

Postcode districts we cover here for glazing silicone: RG28. Whether your property is on Priory Lane and London Road or anywhere close by, we can help. Close by, we work in Freefolk (1 mile east), Whitchurch (1 mile west), Cole Henley (2 miles north), Firgo (2 miles south-west) and Hurstbourne Priors (3 miles south-west). We also work in nearby towns such as Basingstoke (9 miles east), Winchester (12 miles south), Andover (7 miles west), Tadley (11 miles north-east), Hyde (11 miles south) and Popley (11 miles east).

Around Wells-in-the-Field

Typical jobs here are in homes near Testbourne Community School and Railway Hotel. For rail, the closest station is Whitchurch (Hampshire) station, about 1.1 miles west.

Map of Wells-in-the-Field © OpenStreetMap contributors

Why deal with it now?

You do not need new glazing because the sealant has gone. Sound glass and frames normally just need resealing, and we’ll tell you if that is not the case. Older cottages and farmhouses around Wells-in-the-Field can have timber floors and frames, and water through a failed joint can rot timber if it’s left.

Combining jobs into one visit normally makes better use of the time than several visits, so it’s worth mentioning everything you’d like done. We will give you a clear quote for the lot.

Why choose Mr Mastic in Wells-in-the-Field

  • Tidy, careful work
  • Fully insured
  • Any old sealant cut out fully, not covered over
  • White, clear, grey or another colour, product permitting

Read how sealant jobs are priced and customer reviews.

What happens on the day

We work through the job in order: protect, prepare, seal, tidy. For most jobs that takes anything from an hour or two to most of a day, depending on the size of the job and we leave things clean and tidy. For a village or hamlet like Wells-in-the-Field, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.

  1. First, we check where the water gets in.
  2. The failed silicone is cut out without marking the glass or frame.
  3. The joint is cleaned and degreased.
  4. We lay the new bead and tool it smooth.
  5. We check the finished joints and test with water where it’s safe.

Getting ready for the visit

  • Clear the area around the work
  • Tell us if parking is tricky
  • Tell us about any water getting in

Getting a quote

For a quote, phone 0345 464 0079 or email us with the location and a short description of the problem. We will give you a clear price before any work starts.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job