East Sussex · England
Glazing & conservatory sealant in Ticehurst, East Sussex
Glazing silicone for conservatories, rooflights, glass panels and shower screens in Ticehurst, with a 12-month guarantee on every job. Call for a quick quote.
- Leaking glazing joints on a rooflight
- Water escaping where a screen meets the wall
- Drips on the inside of a conservatory window
Glazing silicone for homes and businesses in Ticehurst
Glazing silicone that has yellowed, blackened or come away looks poor and can leak. It comes off cleanly, without marking the glass and reseal the joint. Common call-outs are for leaks from the base of a shower screen and rooflight joints letting water in, on conservatory frames, glass-to-frame joints and glass balustrade bases.
Around Ticehurst, many homes face open ground, so their windows and doors take the full weather. Exposed frames and sills lose their mastic sooner than sheltered ones.
All of our work is guaranteed for twelve months.
- Location
- Ticehurst (TN5)
- Wider area
- East Sussex
- Guarantee
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
How to look after the new joints
To keep the joints looking good and working properly:
- Don’t leave a drip for the next storm
- Check the gutters above the glazing for debris
- Keep harsh solvents off the silicone
- Use a gentle glass cleaner and a soft cloth
Follow the cure time we give you before the joints get wet so the silicone can set properly. After that, clean glass with a mild cleaner.
If silicone on glass has cracked, water is already getting in. Resealing now is a small job compared with fixing water damage later.
Ticehurst homes and the weather
Compared with the north and west, the South East gets less rain, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day. Historic houses like Scotney Castle (about 3.2 miles north) are a reminder that the area around Ticehurst has older buildings as well as new. Where a home is older, older timber frames in brick or stone need a different approach from a modern uPVC window.
Homes close to St Mary's Church include some older properties, and the joint between an old wall and a newer frame is normally the first place rain gets in. For landlords with property near Stonegate station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Ticehurst is about 9 miles south-east of Royal Tunbridge Wells, in East Sussex. We carry out glazing silicone for homes and businesses in Ticehurst and the surrounding area, as part of our work across East Sussex. We cover 289 towns and villages across East Sussex. Crawley is on our list too, around 26 miles away.
Every address in TN5 is within our area for glazing silicone. If you need glazing silicone at a property on High Street, Springfields and Farthing Hill or anywhere close by, we can help. We also cover Three Leg Cross (1 mile north-west), Flimwell (2 miles east), Stonecrouch (2 miles north), Burgh Hill (3 miles south-east) and Etchingham (3 miles south-east). We also work in nearby towns such as Hastings (14 miles south-east), Bexhill-on-Sea (14 miles south), Hailsham (14 miles south-west), Crowborough (11 miles west), St Leonards (15 miles south-east) and Uckfield (14 miles west).
What’s near Ticehurst
We work in homes and buildings around The Chequers Public House. The closest station to Ticehurst is Stonegate station, about 2.7 miles south-west. Well-known places in the area include Finchcocks Musical Museum (4 miles north) and Ticehurst House Hospital (0.6 miles west). Not far away are Bewl Water.
When something else is needed
New sealant cannot fix everything, and we’ll tell you before we start. It will not solve:
- A roof that has moved or dropped
- Rotten or badly damaged frames
- Leaks from the roof covering or flashing (a roofer’s job)
If you are not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Where we work in Ticehurst
- Rooflights
- Glass-to-frame joints
- Conservatory frames
- Shower screens
- Glass balustrade bases
- Glass-to-glass joints
Surface by surface
Glass-to-frame joints
The sealant must stick to glass and frame alike. We use a glazing silicone suited to each.
Conservatory frames
Frame joints face sun and rain all year. Renewed sealant keeps water out.
Questions from Ticehurst
Do you cover Ticehurst for glazing silicone?
Yes, Ticehurst is within the area we cover. We work across London and the South East. You can call 0345 464 0079 or drop us an email and tell us what needs doing, and we’ll give you a clear price.
Will you come out to Ticehurst?
Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Are you an approved applicator?
Yes. Mr Mastic is an ARBOMaster approved applicator.
How do I get a quote for glazing silicone in Ticehurst?
Every job is different, so each one gets its own quote. To get one, phone 0345 464 0079 or email us with a short description of the job.
How long will you be here?
It depends on the size of the job, but most jobs take a few hours, depending on how many joints need doing. We will give you a better idea when we quote.
Do the sealants smell?
There can be a smell while the sealant cures, but it fades. Opening a window helps.
Can you reseal a frameless shower screen?
Yes, it’s a common job. We use anti-fungal silicone made for wet areas.
Does someone need to be in?
It depends on the job. Inside work needs someone to give us access, and for outside work we will agree access with you when we book.
What happens on the day
On the day, there’s very little for you to do. Point us to the joints and we will get on with it. The work itself takes a few hours for most jobs, including the tidy-up. Somewhere like Ticehurst needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- First, we check where the water gets in.
- We remove the old sealant carefully.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- We check the finished joints and test with water where it’s safe.
Preparing for the visit
- Mention any tricky access
- Tell us about any water getting in
- For indoor joints, keep the area dry beforehand if you can
Getting a quote
If you are in Ticehurst and need glazing silicone, ring 0345 464 0079 or drop us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before any work starts.
Related advice
Nearby places to Ticehurst
Other services in Ticehurst
When to call us in Ticehurst
The wrong sealant is a common cause. Not every silicone sticks properly to glass and vinegar-smelling acetoxy silicone can attack some metals.
The problems people usually mention when they call include:
- Water tracking down the inner face of the glass
- Black or yellowed silicone on glass joints
- Glass-to-glass joints that have split
- Conservatory leaks at frame and glazing joints
If you look after a building such as Ticehurst and Flimwell Church of England Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
What to look for in a quote
- Are they insured?
- When the joint can take water or movement
- What guarantee comes with the work
- Whether VAT is included
Landlords, agents and businesses in Ticehurst
We also work for businesses, from offices to washrooms and kitchens. For commercial premises, we can talk through working times when we quote.
We work for letting agents and landlords as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.
Can I do it myself?
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
A careful DIYer can reseal a simple joint, like a short, easy-to-reach joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.