Kent · England
Glazing Silicone in Satmar
Our applicators work in Satmar on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- Shower screens leaking along the wall or tray
- Sealant that was laid over old silicone and failed
- Stained, discoloured glazing silicone
How the job changes by surface
Glass-to-frame joints
Glass-to-frame joints need a sealant that bonds to both. We choose a product that suits both.
Shower screens
A screen’s wall joint and tray joint are where leaks start. Both are resealed with anti-fungal silicone.
About our glazing silicone in Satmar
Across Satmar, we reseal glazing joints in homes, offices and hotels. Conservatories, rooflights, glass panels and shower screens are all part of the job, with a sealant chosen for the joint. If you have split or lifting silicone on glass and black or yellowed silicone on glass joints, we can help, whatever the surface.
Somewhere as small as Satmar, older homes often have timber frames set in stone or brickwork. Older buildings like these do not always suit modern silicone, so the sealant has to be chosen to suit the building.
You get a 12-month guarantee, the same in Satmar as everywhere else we work.
- Place
- Satmar (CT18)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- Quoted before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What we do, step by step
When we arrive, we start by going over the job with you, so you know exactly what we are doing. We protect the surfaces around the joints before any work begins. The work usually takes a few hours, depending on how many joints need doing. Somewhere as small as Satmar, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- The joint is cleaned and degreased.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
Before we arrive
- For indoor joints, keep the area dry beforehand if you can
- Mention any parking rules near the property
- Move anything stored near the joints
How to get a quote
It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, phone 0345 464 0079 or email us.
Read more
Windows and doors in Satmar
Satmar is close to the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That is hard on glazing joints and frame seals, especially on the side facing the sea. Historic houses like Acrise Place (about 4.3 miles north-west) are a reminder that the area around Satmar has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
Schools such as Capel-le-Ferne Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s. If you let a flat or house near Folkestone Central station, glazing joints are worth checking at the end of a tenancy, before a small leak grows. In the older streets around St Mary's Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Satmar is about 3 miles north-east of Folkestone, in Kent. Whether you are in the middle of Satmar or further out, glazing silicone is available for homes and businesses alike, from flats and houses to offices and hotels. Across Kent, we cover 922 places, Satmar among them. We also work in Chelmsford, about 54 miles from Satmar.
Postcode districts we cover here for glazing silicone: CT18. Other places close to Satmar include Capel-le-Ferne (1 mile south-west), West Hougham (1 mile north-east), Drellingore (1 mile north-west), Church Hougham (1 mile east) and South Alkham (2 miles north). Further out, we also cover Canterbury (13 miles north-west), Dover (4 miles north-east), Folkestone (3 miles south-west), Deal (10 miles north-east), Hythe (7 miles south-west) and Tower Hamlets (4 miles north-east).
Local landmarks in Satmar
Around Satmar, our work takes us to homes and buildings near East Cliff and Warren Country Park. Satmar’s nearest station is Folkestone Central station, roughly 3 miles south-west of the centre. Nearby you will also find Folkestone Castle (2.8 miles west) and Royal Victoria Hospital (2.7 miles south-west). The countryside around Satmar includes Dover Western Heights and Sugar Loaf Hill.
Nearby places to Satmar
What else we do in Satmar
What affects the cost of glazing silicone
The price is agreed before any work begins. It’s based on:
- Which sealant suits the joint
- How much old sealant there is and how hard it is to remove
- The size of the job
- How easy the joints are to reach
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether the work is at height. We take all of that into account in your quote.
What to tell us for a quote
When you contact us, these details help:
- The rough size of the job
- Access, such as stairs, a lift or height
- Photos by email, if that is easy
- The type of property
Every job is quoted individually. Simply ring 0345 464 0079 or email us and describe the job, and photos are welcome.
Satmar: your questions answered
Does the coastal weather in Satmar affect outside sealant?
Near the coast, wind-driven rain and, nearer the shore, salt air make outside sealant work harder. The right product, a clean joint and the right depth all help it cope.
Do you cover smaller places like Satmar?
Yes, Satmar is covered. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Will you leave a mess?
No. We work neatly, protect the area around the joints and tidy up afterwards.
How long will you be here?
That depends on how much there is to do, but most jobs take a few hours, depending on how many joints need doing. We’ll give you a better idea when we quote.
Will there be a smell?
Possibly a little. It fades as the sealant cures, and ventilation helps.
Do you hold any approvals?
Yes. Mr Mastic is an ARBOMaster approved applicator.
What do you put in the joint?
It depends on the joint: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. Brands we use include Arbo and Everbuild.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, and for outside work we’ll agree access with you when we book.
Why it’s worth doing now in Satmar
If the problem is a misted unit or a broken panel, sealant will not help. We will tell you that rather than seal it anyway and point you to a glazier or roofer. Where a wall is exposed, as many are in small places like Satmar, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
Commercial jobs are quoted on the same basis as homes: the amount of work, the access and the products needed, plus any working-time requirements on site. Call for a quick quote and we’ll go through it with you.
Why choose Mr Mastic in Satmar
- 12-month guarantee on every job
- We leave the area clean and tidy
- Experience in homes, commercial sites and hotels
- 20+ years of sealant experience
See our cost guide and our reviews.
When something else is needed
New sealant cannot fix everything, and we’ll tell you before any work starts. Sealant will not put right:
- Condensation trapped between two panes
- A roof that has moved or dropped
- Water coming through the roof rather than a sealant joint
If in doubt, call 0345 464 0079 or email us and we will say what we think.
Where we work in Satmar
- Conservatory frames
- Glass-to-glass joints
- Glass balustrade bases
- Glass-to-frame joints
- Rooflights
- Shower screens
Can I do it myself?
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Sealing over old silicone is the commonest DIY error. Silicone does not stick to old silicone, so it lifts and traps water and mould underneath. All the old material has to come out first.
Landlord and commercial work in Satmar
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. Hotel work is part of what we do, alongside homes and businesses.