Kent · England
Glazing Silicone in Pett Bottom
We cover Pett Bottom for glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- Stained, discoloured glazing silicone
- Failed sealant around rooflight glass
- Leaks where conservatory glass meets the frame
Glazing silicone for homes and businesses in Pett Bottom
Glass replacement is not something we do, and misting between panes means a failed sealed unit. What we do is the silicone around the glass, which is where many leaks start. We work on glass-to-glass joints, shower screens and conservatory frames, and people most often call us about split or lifting silicone on glass and water tracking down the inner face of the glass.
In a village or hamlet like Pett Bottom, older cottages and farmhouses often have timber windows set in stone or brick. Older buildings like these do not always suit modern silicone, so the sealant has to be chosen to suit the building.
Big or small, you get the same one-year guarantee.
- Location
- Pett Bottom (CT4)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
Why it’s worth doing now in Pett Bottom
Replacing a conservatory roof is major work. Where the water is getting in through sealant renewing the joint is the simpler fix. If the roof is the problem, we will say so. Older cottages and farmhouses around Pett Bottom can have timber floors and frames, and water through a failed joint can rot timber if it’s left.
What you pay reflects the work, not guesswork. That’s why we ask about the job first.
Why book with us
- Trusted Arbo and Everbuild sealants
- Sanitary silicone with an anti-fungal additive in wet areas
- A choice of colours where the product allows
- Any old sealant cut out fully, not covered over
See what affects the cost and our reviews.
DIY versus a professional finish
If you’ve already had a go yourself, that’s fine. We cut it out and start again.
The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is matched to the joint and its conditions, then guaranteed for a year.
Common questions in Pett Bottom
I let a flat near Bekesbourne station. Can you help?
Yes, we work for landlords and letting agents. Just call 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear quote.
Can you do glazing silicone in Pett Bottom?
Yes, Pett Bottom is within the area we cover. We work across London and the South East. Just call 0345 464 0079 or drop us an email with a few details of the job.
Can I add another job to the visit?
Yes. Just list everything you need and you’ll get one quote.
What do you put in the joint?
Products from Arbo and Everbuild, among others, chosen to suit the joint. We will tell you what we’re using and why.
Can you match the sealant colour?
We help you choose a colour that suits. The choice depends on the product the joint needs.
Can a conservatory leak be sealed?
It depends on the cause. Failed glazing and frame joints can be resealed but roof and panel problems need another trade.
When is the sealant fully cured?
Different products cure at different speeds, so please follow the time we give you when we finish.
Where is Mr Mastic based?
We are based in Crawley, West Sussex, and we work across South East England, London and Scotland.
Frames and glazing around Pett Bottom
London and the South East are among the drier parts of the UK, though outdoor sealant still has to go onto a dry joint, so the forecast decides the day.
Homes close to Church of St Mary include some older properties, and frames set in older brick or stone need a sealant that suits the wall as well as the frame. If you look after a building such as Simon Langton Grammar School for Boys, the mastic around its windows and doors needs looking after like any other building’s.
Pett Bottom is about 4 miles south of Canterbury, in Kent. Across the CT4 area, our applicators can take on glazing silicone. Pett Bottom is one of 922 towns and villages in Kent we cover. We also work in Chelmsford, about 44 miles from Pett Bottom.
Postcode districts we cover here for glazing silicone: CT4. You will find streets such as Pett Bottom Road and School Lane. Neighbouring places we cover for glazing silicone include Lower Hardres (1 mile north-west), Upper Hardres (1 mile south-west), Street End (1 mile north-west), Lynsore Bottom (1 mile south) and Nackington (2 miles north). Larger places within reach include Ashford (12 miles south-west), Canterbury (4 miles north), Dover (11 miles south-east), Folkestone (10 miles south), Whitstable (9 miles north) and Deal (13 miles east).
Landmarks near Pett Bottom
Typical jobs here are in homes near The Duck pub and the streets around them. The nearest railway station is Bekesbourne station, about 3 miles north-east. Other landmarks nearby include Canterbury Castle (3.4 miles north) and Rupert Bear Museum (3.5 miles north).
What happens on the day
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for most jobs. Somewhere as small as Pett Bottom, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First, we check where the water gets in.
- The failed silicone is cut out without marking the glass or frame.
- We clean the glass and frame so the new silicone bonds.
- We lay the new bead and tool it smooth.
- Each joint is checked and, where possible, water-tested.
Preparing for the visit
- Mention if the joints have been sealed before
- Mention any tricky access
- On commercial sites, let us know about site rules
Get a quote
Every job is quoted individually, so the first step is telling us about yours. Just call 0345 464 0079 or email us with the details and send photos if you have them.
Related advice
Work for landlords, hotels and businesses
If you manage several properties in or around Pett Bottom, jobs at different addresses can go on one quote. Just tell us the addresses and what each one needs, and photos by email help.
In hotels, rooms out of use cost money, so we plan the work room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.
Common problems we fix in Pett Bottom
Not every leak is a sealant problem: broken panels, roof problems and blocked gutters can all let water in. We find the cause before we seal anything.
Keep an eye out for any of the following:
- Rooflight joints letting water in
- Water escaping where a screen meets the wall
- Glazing silicone that has cracked or come away
- Drips on the inside of a conservatory window
Letting a property close to Bekesbourne station? Then glazing joints are worth checking at the end of a tenancy, before a small leak grows.
What to look for in a quote
- Whether they’re fully insured
- Whether the sealant suits the joint
- What preparation is included
- When the joint can take water or movement
What affects the quote in Pett Bottom
Some jobs are bigger than they look, and some smaller. What affects the quote:
- When we can work, for business premises
- Whether old sealant or filler has to be cut out
- How much there is to do
- How many areas need sealing
Some things make a job bigger or smaller: the old material and how easily it comes out, any mould to treat, and whether we need extra access for height. We take all of that into account in your quote.
What to tell us for a quote
When you contact us, these details help:
- Roughly how big the job is
- Access, such as stairs, a lift or height
- Pictures of the joints, sent by email
- Whether it has been sealed before
Want a quote for glazing silicone? Please phone 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
What the job involves on each surface
Rooflights
Rooflight glazing joints are cut out and renewed. Leaks from the roof itself need a roofer.
Glass-to-frame joints
We cut the old silicone from the glass without scratching it before new glazing silicone goes in.