Medway · England
Glazing & conservatory sealant in Mockbeggar, Medway
Problem with your glazing joints in Mockbeggar? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Glass-to-glass joints that have split
- Water running down inside the glass
- Silicone pulling away from the glass
The process
Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. For most jobs that takes a few hours for most jobs. In a small place like Mockbeggar, access is generally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.
- We trace the leak and confirm it’s a sealant joint.
- We remove the old sealant carefully.
- We clean the glass and frame so the new silicone bonds.
- A neutral-cure glazing silicone is applied and tooled.
- Each joint is checked and, where possible, water-tested.
Getting ready for the visit
- For indoor joints, keep the area dry beforehand if you can
- Mention any tricky access
- Clear the area around the work
How to get a quote
For a quick quote, get us on the phone, or send an email if you’d rather. Tell us about the joints that need doing and we will explain what’s involved and send you a clear quote.
Read more
How we handle glazing silicone in Mockbeggar
Across Mockbeggar, we reseal glazing joints in homes, offices and hotels. From conservatories to shower screens, it’s the same careful method, with a sealant chosen for the joint. If you have rooflight joints letting water in and leaks where conservatory glass meets the frame, we can help, whatever the surface.
Homes in small places like Mockbeggar often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or drop us an email.
- Where
- Mockbeggar (ME3)
- Region
- Medway
- Guarantee
- One year on every job
- Quote
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
Towns and villages near Mockbeggar
What else we do in Mockbeggar
How the job changes by surface
Glass-to-frame joints
Old sealant is removed carefully from the glass before new glazing silicone goes in.
Rooflights
Water around a rooflight is not always the sealant. We find the cause first.
Common problems we fix in Mockbeggar
Some conservatory leaks aren’t sealant at all: broken panels, roof problems and blocked gutters can all let water in. We find the cause before we seal anything.
The problems people usually mention when they call include:
- Silicone pulling away from the glass
- Glass-to-glass joints that have split
- Rooflight joints letting water in
- Drips on the inside of a conservatory window
Rented homes near Higham station change hands often, and a shower screen or conservatory joint that leaks is easier to reseal while the property is empty.
Questions to ask before you book
- Whether the sealant suits the joint
- How long the guarantee is
- How hidden problems are handled
- Is the old sealant removed completely?
Your questions about glazing silicone in Mockbeggar
Can you help a landlord with a rental near Higham station?
Yes, we work for landlords and agents. You can ring 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before work begins.
Will you come out to Mockbeggar?
Yes, Mockbeggar is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Do I need to be at home?
Access is agreed with you when the job is booked. Indoors, that usually means someone at home.
Will there be a smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Do you reseal glass shower screens?
Yes. We remove the old sealant and reseal the wall and tray joints.
What information do you need?
Tell us what needs doing and where, plus photos if you have them. We’ll ask anything else we need to know.
Do you have insurance?
Yes. Full insurance covers our work.
What sealant do you use on glazing?
A glazing-grade silicone is best. We use neutral-cure glazing silicone with anti-fungal products in bathrooms.
What glazing silicone looks like in Mockbeggar
Mockbeggar is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. Both are hard on glazing joints and frame seals, which can dry out and crack sooner where a building faces the weather. Historic houses like Temple Manor (about 2.3 miles south) are a reminder that the area around Mockbeggar has older buildings as well as new. In older buildings, older timber frames in brick or stone need a different approach from a modern uPVC window.
Historic houses such as Temple Manor, about 2.3 miles south, show how far back building around Mockbeggar goes. For site and facilities teams at buildings such as Cliffe Woods Primary School, larger buildings have plenty of frames, and the mastic around each one ages.
Mockbeggar is about 2 miles north of Rochester, in Medway. Jobs in Mockbeggar get the same care as everywhere else we work: the old material taken out, joints prepared properly and a 12-month guarantee. Our Medway coverage runs to 68 places, and Mockbeggar is one of them. We also work in Chelmsford, about 22 miles from Mockbeggar.
We cover every part of the ME3 postcode area for glazing silicone and the streets around it. Whether your property is on Bunters Hill Road and Town Road or anywhere close by, we can help. If you’re just outside Mockbeggar, we cover Cliffe Woods (1 mile north-east), Lower Higham (1 mile west), Church Street (2 miles north-west), Higham (2 miles west) and Gadshill (2 miles south-west). Within a short drive, we also cover Gillingham (5 miles south-east), Chatham (5 miles south), Rainham (7 miles south-east), Luton (4 miles south-east), Park Wood (7 miles south-east) and Lordswood (6 miles south).
Landmarks near Mockbeggar
Typical jobs here are in homes near Temple School, Strood Academy and Broomhill Park, among other places. For rail, the closest station is Higham station, roughly 1.2 miles west of the centre. A little further out are French Hospital (2.4 miles south) and Pentagon Shopping Centre (3 miles south-east). For a walk, there’s Rede Common and Gad's Hill.
Can I do it myself?
A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.
The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.
Leave it or put it right?
If the problem is a misted unit or a broken panel, sealant won’t help. We’ll tell you that rather than seal it anyway and point you to a glazier or roofer. Around Mockbeggar, older homes often have timber in their floors and frames, where water from a failed joint can cause rot if it’s left.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.
Why us?
- Anti-fungal sanitary silicone in wet areas
- Approved under the ARBOMaster scheme
- Every job guaranteed for a year
- Trusted Arbo and Everbuild sealants
Read our cost guide and what customers say.
Work for landlords, hotels and businesses
A neglected joint can let water reach the structure, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
We regularly work with letting and managing agents. Tell us the address, the job and how access works.
How to look after the new joints
So the new joints stay in good condition:
- Use gentle products around the joints
- Keep conservatory gutters clear of leaves
- Avoid scraping close to the bead
- Squeegee the shower screen after each use
Keep conservatory gutters clear so water doesn’t back up against the seals. Blocked gutters can push water where it shouldn’t go.
Act on black or lifting silicone early. Once it starts to peel, water gets behind it and the leak gets worse.