Highland · Scotland

Glazing Silicone in Lonmore

Glazing joints in Lonmore need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Failed sealant around rooflight glass
  • Water escaping where a screen meets the wall
  • Split or lifting silicone on glass

Trusted glazing silicone in Lonmore

How we handle glazing silicone in Lonmore

Not every silicone suits glass. We use a neutral-cure glazing silicone, which suits glass and most frame materials, finished with a neat, even bead. Common call-outs are for a quick top-up bead that didn’t last and water getting into a conservatory at the joints, across glass-to-glass joints, shower screens and glass balustrade bases.

Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Wind-driven rain finds any gap around a frame or sill, so the mastic there works hard.

Our work is backed for twelve months, and the guarantee is the same wherever you are.

Location
Lonmore (IV55)
Region
Highland
Cover
A year, on every job
Price
A clear price before we start
Email
info@mrmastic.co.uk
Updated
26 October 2026
Mr Mastic applicator sealing the top of a white uPVC door frame on a red-brick house

Landlords, agents and businesses in Lonmore

We regularly work with letting and managing agents. Tell us the address, the job and how access works.

In hotels, rooms out of use cost money, so the work can be planned room by room around your bookings where we can. We have worked in hotels as well as homes and businesses.

The process

Once we’re on site, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take anything from an hour or two to most of a day, depending on the size of the job. In smaller Scottish places, parking is generally less of an issue than access and distance. Let us know how to find you and how to reach the joints, and the visit is planned around that.

  1. We look at the glazing and agree which joints need resealing.
  2. We cut away the failed silicone.
  3. We clean and prepare the joint.
  4. We apply and tool the new silicone.
  5. We inspect the work and test it where we can.

Before we arrive

  • Let us know if you’ve seen damp or leaks
  • Let us know about earlier repairs to the joints
  • Let us know about parking restrictions

Ask for a quote

Getting a quote is simple: let us know the job and the location. A few photos by email make the job easier to understand.

Ask for a quote

Advice

Lonmore: your questions answered

Do you cover Lonmore for glazing silicone?

Yes. Our work covers the whole of Scotland, and Lonmore is part of that. Just send an email to info@mrmastic.co.uk with a few details of the job.

Will you come out to Lonmore?

Yes, Lonmore is covered. We work across all of Scotland, from towns to the smallest places. Longer journeys are simply planned in advance.

What sealant do you use on glazing?

We use a neutral-cure glazing silicone that suits the glass and frame. In bathrooms, we use anti-fungal silicone.

Will resealing stop my conservatory leaking?

It depends on the cause. Failed glazing and frame joints can be resealed but roof and panel problems need another trade.

Can I choose the sealant colour?

In most cases you can choose. We’ll explain which colours are available.

Do you replace glass?

No, our work is the silicone. A glazier replaces glass and units.

Do you do commercial work?

Yes. Larger jobs can be planned room by room or area by area to suit the site.

Do the sealants smell?

Possibly a little. Any smell clears as the sealant cures, and ventilation helps.

Windows and doors in Lonmore

Lonmore is within about 2 miles of the coast, and homes near the sea take more wind-driven rain, with salt in the air closer to the shore. That’s hard on glazing joints and frame seals, especially on the side facing the sea. Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic.

Around Lonmore, as everywhere, glazing silicone is only as good as the preparation behind it.

Lonmore is in Highland. From the centre of Lonmore to the outskirts, glazing silicone is available for homes and businesses alike. Our area takes in 253 places across Highland.

Postcode districts we cover here for glazing silicone: IV55. Neighbouring places we cover for glazing silicone include Dunvegan (1 mile north-west), Kilmuir (1 mile north-west), Colbost (3 miles west), An t-Aodann Ban (6 miles north-east) and Coillore (8 miles south-east). Island and remote addresses take a little more planning, so tell us where you are when you ask for a quote.

Landmarks near Lonmore

Nearby you’ll also find Dunvegan Castle (2 miles north-west) and Giant Angus Macaskill Museum (1 mile north-west). The countryside around Lonmore includes MacLeod's Table.

Map of Lonmore © OpenStreetMap contributors

Keeping the joints in good condition

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Keep harsh solvents off the silicone
  • Get a new leak looked at quickly
  • Keep conservatory gutters clear of leaves
  • Check the silicone on glass every year or so

Check the joints once a year. Spotting a crack early means a simpler fix, before water gets in.

Drips or damp near a glazing joint shouldn’t be ignored. The cause may be sealant or another part, and we will tell you which.

DIY sealant or a professional job?

The difference is mostly in the preparation and the product. We take joints back to clean, dry surfaces, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.

Do you need glazing silicone in Lonmore?

Silicone will not bond to a dirty surface. Where the joint wasn’t cleaned and degreased the sealant may lift within a few years.

Signs it’s time to call us include:

  • Water getting into a conservatory at the joints
  • Cracked silicone between glass panels
  • A quick top-up bead that didn’t last
  • Water running down inside the glass

Whether the job is in Lonmore itself or nearby, the right material for each joint matters as much as a neat finish.

Questions to ask before booking

  • Whether all the old sealant comes out first
  • How the joint is cleaned and prepared
  • What the cure time is
  • Who turns up on the day

10 questions to ask before booking

What the job involves on each surface

Shower screens

Mouldy or lifting sealant on a screen leaks. A full reseal sorts it.

Glass-to-glass joints

Frameless glass corners and panels are joined with silicone. We reseal with a suitable glazing silicone.

Leave it or put it right?

Replacing a conservatory roof is major work. Where the water is getting in through sealant renewing the joint is the simpler fix. If it’s the roof itself, we will tell you. When the nearest tradesperson is a drive away, it’s tempting to leave a small leak, but water through a failed joint keeps working away until it’s fixed.

Leaving a failed joint usually makes the job bigger, not smaller, as water and mould keep getting in. If you’re unsure, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.

What you get with us

  • Neat joints and a tidy finish
  • Approved under the ARBOMaster scheme
  • 4.9 on Google from 180+ five-star reviews
  • Sanitary silicone with an anti-fungal additive in wet areas

See how sealant jobs are priced and what customers say.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job