Scottish Borders · Scotland
Greycrook Glazing Silicone
Glazing joints in Greycrook need attention? We cut out the old, prepare the joints and apply the right sealant, with a one-year guarantee.
- Conservatory leaks at frame and glazing joints
- Silicone pulling away from the glass
- Sealant that was laid over old silicone and failed
Signs you need glazing silicone in Greycrook
UV light ages silicone, especially on conservatory roofs. It goes brittle, cracks and stops sticking on the glass.
These are the problems we’re asked about most:
- Conservatory leaks at frame and glazing joints
- Failed sealant around rooflight glass
- Shower screens leaking along the wall or tray
- Split or lifting silicone on glass
For an older house near a landmark such as St Boswells Church, the joint between an old wall and a newer frame is usually the first place rain gets in.
What to look for in a quote
- Which sealant they’ll use, and why
- What guarantee comes with the work
- When the joint can take water or movement
- Who turns up on the day
Glazing silicone for homes and businesses in Greycrook
Many conservatory leaks come down to failed sealant, where glass meets frame or frame meets wall. We trace the leak to the joint and reseal it and tell you plainly if the cause is something else. We work on glass-to-frame joints, conservatory frames and shower screens, and the jobs we see most are water tracking down the inner face of the glass and silicone pulling away from the glass.
Many older Scottish homes still have timber windows set into stone walls. Those suit a traditional sand mastic or a neutral-cure sealant, not an acetoxy silicone that can attack some stone.
You are covered for a year from the day we finish. If there’s a problem with it, please email us at info@mrmastic.co.uk.
- Place
- Greycrook (TD6)
- Region
- Scottish Borders
- Guarantee
- One year on every job
- Quotes
- Quoted before any work starts
- info@mrmastic.co.uk
- Last updated
- 26 October 2026
Towns and villages near Greycrook
What else we do in Greycrook
Surface by surface
Glass-to-glass joints
These joints are on show, so we take care to leave a neat bead.
Conservatory frames
The joints where the conservatory meets the house take a lot of movement. We reseal them with a sealant suited to the frame.
Common questions in Greycrook
Is glazing silicone in Greycrook guaranteed?
All our work, in Greycrook and everywhere else, comes with a 12-month guarantee. We’re fully insured, and an ARBOMaster approved applicator.
Do you cover Greycrook for glazing silicone?
Yes. We work across all of Scotland, and Greycrook is part of that. Just drop us a line at info@mrmastic.co.uk with a few details of the job.
Should I try DIY first?
You can, for simple jobs. Preparation is everything: all the old sealant out, and a clean, dry joint. We can always put it right if it fails.
Do you take out the old sealant first?
Yes, every time. New sealant will not bond properly to old, so any old material comes out before anything new goes in.
Can you reseal the base of a glass balustrade?
Yes, we reseal the joint at the base channel. We don’t install or replace the glass.
Is it possible to redo the silicone on a shower screen?
Yes, we do these often. The screen is resealed with anti-fungal silicone suited to bathrooms.
Will there be a smell?
Sometimes, a little. Any smell clears as the sealant cures, and ventilation helps.
Can you match the sealant colour?
Yes. White, clear and grey are common, and other colours are available, and we will agree it with you first.
Glazing silicone in Greycrook: local notes
Many older homes in Scotland have sash and case windows, and the joint between the box frame and the stone or render is traditionally pointed with sand mastic. Under the Repairing Standard, private landlords in Scotland have to keep homes wind and watertight, and failed outside joints work against that.
Around Greycrook, as everywhere, glazing silicone is only as good as the preparation behind it.
Greycrook is about 7 miles south-east of Galashiels, in the Scottish Borders. Anywhere in TD6, we can carry out glazing silicone at your property. Across the Scottish Borders, we cover 89 places, Greycrook among them. For nearby work, see our Edinburgh page.
Our applicators cover all of the TD6 postcode area for glazing silicone and the streets around it. That includes homes and businesses on Kirk Road, Weirgate Avenue and Polwarth Avenue and the roads around them. Being close to the A699, Greycrook is easy for our applicators to reach. Neighbouring places we cover for glazing silicone include St Boswells (1 mile north-west), Maxton (1 mile east), Newtown St Boswells (2 miles north-west), Bowden (3 miles west) and Newstead (3 miles north-west). Larger places within reach include Galashiels (7 miles north-west), Hawick (11 miles south-west), Kelso (8 miles east), Selkirk (8 miles west), Jedburgh (7 miles south-east) and Wilton (11 miles south-west).
Around Greycrook
A little further out are Castle Holydean (3.8 miles west) and Dingleton Hospital (4 miles north-west). The countryside around Greycrook includes Bemersyde Moss and Eildon Hill North.
Quotes for glazing silicone in Greycrook
Call for a quick quote. What matters most is:
- Access and height
- How many rooms, windows or areas are involved
- When we can work, for business premises
- Any mould that needs treating
We don’t show prices on the website, because each job is priced on what it involves. Call for a quick quote and we will talk you through it.
What we need to know
There’s no need for technical detail. Just tell us:
- If someone has resealed it before
- Roughly how big the job is
- Whether it’s a home or a business
- The address or postcode of the job
Getting a quote is simple: let us know the job and the location and its rough size. A few pictures by email make the job easier to understand, and we’ll take it from there.
Aftercare tips
No joint lasts for ever, but care makes a real difference. Our tips:
- Check the gutters above the glazing for debris
- Keep harsh solvents off the silicone
- Clean glass with a mild cleaner and a soft cloth
- Keep air moving in the conservatory
Follow the cure time we give you before the joints get wet. From then on, a mild glass cleaner is all it needs.
Damp patches, drips and condensation along a joint are worth checking. The cause may be sealant or another part and we will find out which.
How the visit works
At the end, we look at the finished work together. The work normally takes a few hours for most jobs, depending on the size of the job. In smaller Scottish places, parking is usually less of an issue than access and distance. Tell us how to find the property and how to reach the work, and the visit is planned around that.
- We look at the glazing and agree which joints need resealing.
- Old sealant is removed from the glass and frame.
- The surfaces are cleaned with a suitable solvent.
- We apply and tool the new silicone.
- We inspect the work and test it where we can.
Preparing for the visit
- On commercial sites, let us know about site rules
- Mention if the joints have been sealed before
- Mention any tricky access
How to get a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.
Related advice
Why it’s worth doing now in Greycrook
Fixing a leaking screen early protects what’s underneath. A small leak can reach the floor below before it shows. Exposed walls in smaller Scottish places take a lot of wind and rain, and damp in stone or harled walls takes a long time to dry once water gets behind a joint.
The cost depends on the amount of work, how much old material has to come out and access to the work. We give a clear quote before we start.
Why choose Mr Mastic in Greycrook
- Colour agreed with you before any work starts
- Over 20 years’ experience
- ARBOMaster approved applicator
- Full insurance on every job
Take a look at what affects the cost or customer reviews.
DIY versus a professional finish
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.