West Sussex · England

Glazing & conservatory sealant in Cross Gate, West Sussex

Glazing silicone for conservatories, rooflights, glass panels and shower screens in Cross Gate, with a one-year guarantee on every job. Call for a quick quote.

  • Leaking glazing joints on a rooflight
  • Conservatory leaks at frame and glazing joints
  • Black or yellowed silicone on glass joints

Glazing silicone near Cross Gate

DIY sealant or a professional job?

A DIY attempt does not rule out a professional job. We cut it out and start again, so just mention it when you contact us.

Some sealant jobs are within reach of a careful DIYer, like a short, easy-to-reach joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

How we handle glazing silicone in Cross Gate

We do not replace glass and a misted double-glazed unit needs a glazier. Our work is the sealant joints and that is often where the water gets in. Typical jobs include sealant that was laid over old silicone and failed and water tracking down the inner face of the glass, on conservatory frames, rooflights and shower screens.

Outdoor sealant needs dry, clean surfaces, so work on frames around Cross Gate is planned for dry weather. Tell us about access to every side of the house, including upper-floor windows.

A one-year guarantee comes as standard, so you are not left on your own once the job is done.

Place
Cross Gate (BN18)
Wider area
West Sussex
Guarantee
One year on every job
Quotes
A clear quote up front
Telephone
0345 464 0079
Page updated
26 October 2026
Sealant gun close-up on a shower enclosure wall joint

For landlords and businesses

Landlords and agents in Cross Gate can book us as well as homeowners. Resealing between tenancies is a simple way to keep a property in good order.

From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a 12-month guarantee.

Common problems we fix in Cross Gate

Not every leak is a sealant problem: broken panels, roof problems and blocked gutters can all let water in. That is why we trace the leak first.

Most people get in touch after spotting something like this:

  • Leaks where conservatory glass meets the frame
  • Water running down inside the glass
  • Leaks from the base of a shower screen
  • Rooflight joints letting water in

Letting a property close to Amberley station? Then leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.

Comparing quotes

  • What insurance they hold
  • When the joint can take water or movement
  • What happens if the job turns out different
  • What preparation is included

Our hiring checklist

When something else is needed

We’ll always be straight with you, so here’s what sealant can’t fix:

  • Frames that have decayed or split
  • Failed flashing around a conservatory
  • Condensation trapped between two panes

Not sure which it is? You can ring 0345 464 0079 or email us and we will tell you honestly before you book.

What we seal

  • Glass-to-glass joints
  • Glass-to-frame joints
  • Conservatory frames
  • Shower screens
  • Glass balustrade bases
  • Rooflights

Common questions in Cross Gate

I let a flat near Amberley station. Can you help?

Yes, rental work is part of what we do. Just call 0345 464 0079 or email us and tell us about the property, and we’ll give you a clear price.

Do you cover smaller places like Cross Gate?

Yes, Cross Gate is covered. We work across London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Will there be a smell?

It depends on the product. Some products have a noticeable smell, others very little, and any smell fades as they cure.

How long does the job take?

Typically it takes anything from an hour or two to most of a day, depending on the size of the job. Larger jobs naturally take longer.

Do you hold any approvals?

Yes. We hold ARBOMaster approved applicator status, and we are fully insured.

Can you just put new silicone over the old?

Silicone doesn’t stick to silicone and water gets between the layers. The old bead always comes out first.

Where is Mr Mastic based?

Mr Mastic is based in Crawley. We cover Cross Gate and the rest of West Sussex.

Do you reseal glass shower screens?

Yes, we do these often. The screen is resealed with anti-fungal silicone made for wet areas.

What happens if it’s left?

You don’t need new glazing because the sealant has gone. If the glass and frame are sound, new silicone is often all it takes, and we’ll tell you if that’s not the case. In a small place like Cross Gate, homes can be exposed to wind and rain, which finds any gap, and damp in older walls is slow to dry out.

A failed joint rarely gets cheaper to fix by waiting, because water and mould keep working on it. If you’re not sure whether it needs doing, phone 0345 464 0079 or drop us an email for an honest opinion and a quote.

Why Cross Gate clients choose us

  • Approved under the ARBOMaster scheme
  • A 12-month guarantee on all work
  • Arbo and Everbuild products
  • Full insurance on every job

Read what affects the cost or our reviews.

Frames and glazing around Cross Gate

With historic houses such as Parham House (about 1.1 miles east) nearby, there’s older building stock in the area around Cross Gate as well as newer homes. Where a home is older, older frames set in brick or stone need a sealant that suits them, and sometimes that’s traditional sand mastic. Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind.

For site and facilities teams at buildings such as Amberley CofE Primary School, its window and door frames need their mastic kept sound, just like a home’s. In the older streets around The Parish Church of St Michael and All Angels, the joint between an old wall and a newer frame is usually the first place rain gets in.

Cross Gate is about 7 miles north of Littlehampton, in West Sussex. We provide glazing silicone to householders, landlords and businesses in Cross Gate and nearby, as part of our work across West Sussex. Cross Gate is one of 371 places in West Sussex where we work for glazing silicone. There’s also a page for Brighton, roughly 18 miles from Cross Gate.

Jobs for glazing silicone in BN18 is quoted and booked the same way as anywhere else. Close by, we work in Rackham (1 mile east), Amberley (1 mile south-west), Bury (2 miles west), Coldwaltham (2 miles north-west) and Watersfield (2 miles north-west). We also work in nearby towns such as Horsham (14 miles north-east), Worthing (8 miles south-east), Bognor Regis (11 miles south-west), Chichester (12 miles south-west), Littlehampton (7 miles south) and Shoreham-by-Sea (12 miles south-east).

Landmarks near Cross Gate

Around Cross Gate, our work takes us to homes and buildings near Parham Park. The nearest railway station is Amberley station, about 1.5 miles south-west of the centre. A little further out are Amberley Museum (1.4 miles south-west) and Amberley Castle (1 mile west). Open spaces near Cross Gate include Bignor Hill and Amberley Wild Brooks.

Map of Cross Gate © OpenStreetMap contributors

Looking after it afterwards

So the new joints stay in good condition:

  • Act on drips or damp patches early
  • Check the silicone on glass every year or so
  • Run a squeegee over the glass when you’re done
  • Keep scrapers and blades away from the silicone

On shower screens, wipe or squeegee after use and let the room air. That slows mould growth on the bead.

Act on black or lifting silicone early. Once it starts to peel, water gets behind it and the problem grows.

The process

You don’t need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the job takes a few hours for most jobs in most cases. Somewhere like Cross Gate needs a little journey planning: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.

  1. First, we check where the water gets in.
  2. We remove the old sealant carefully.
  3. The joint is cleaned and degreased.
  4. We lay the new bead and tool it smooth.
  5. Each joint is checked and, where possible, water-tested.

Preparing for the visit

  • Clear the area around the work
  • Keep pets and children clear of the area while we work
  • Tell us about access, such as stairs, a lift or high-level joints

Getting a quote

We quote each job on its own, so start by telling us what you need. Just ring 0345 464 0079 or drop us an email with the details and send photos if you have them.

Ask for a quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job