Highland · Scotland
Glazing & conservatory sealant in Contin, Highland
Our applicators work in Contin on glazing silicone for conservatories, rooflights, glass panels and shower screens. Old material cut out, joints cleaned and sealed neatly.
- Glass-to-glass joints that have split
- Mouldy sealant around glass panels
- New silicone smeared over old sealant
Common problems we fix in Contin
Silicone will not bond to a dirty surface. Where the joint wasn’t cleaned and degreased, the bead can peel away early.
Most people get in touch when they notice one of these:
- Shower screens leaking along the wall or tray
- Rooflight joints letting water in
- Sealant that was laid over old silicone and failed
- Glass-to-glass joints that have split
For landlords with property near Garve station, glazing joints are worth checking at the end of a tenancy, before a small leak grows.
Before you book anyone
- What insurance they hold
- Which colour the sealant will be
- When the joint can take water or movement
- Who turns up on the day
How we handle glazing silicone in Contin
Many conservatory leaks come down to failed sealant, where glass meets frame or frame meets wall. We trace the leak to the joint and reseal it and tell you plainly if the cause is something else. If you have black or yellowed silicone on glass joints and conservatory leaks at frame and glazing joints, we can put it right.
Across smaller places in Scotland, homes range from stone and harled cottages to newer houses, many standing in the open. Exposed frames and sills take the full force of wind-driven rain, so the mastic there works hard.
Our work is backed for twelve months, and the guarantee is the same wherever you are.
- Place
- Contin (IV14)
- Wider area
- Highland
- Cover
- A year, on every job
- Price
- A clear quote up front
- info@mrmastic.co.uk
- Page updated
- 26 October 2026
Windows and doors in Contin
The west of Scotland is wetter than the east, which means glazing joints and frame seals has to cope with a lot of rain. Private landlords in Scotland must meet the Repairing Standard, which includes keeping a home wind and watertight, and failed outside joints work against that.
Homes close to Contin Church Of Scotland Parish Church include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.
Contin (Gaelic: Cunndainn) is about 15 miles north-west of Inverness, in Highland. For glazing silicone in and around Contin, please send an email to info@mrmastic.co.uk for a quick quote. We cover Highland from our Crawley base, Contin included. Contin is one of 253 places in Highland where we work for glazing silicone.
Here we cover the IV14 postcode area for glazing silicone. You will find streets such as Woodland Park and Craigdarroch Drive. We also cover Strathpeffer (1 mile east), Marybank (3 miles south-east), Blairninich (3 miles north-east), Garve (5 miles north-west) and Maryburgh (5 miles east). Further out, we also cover Inverness (15 miles south-east), Merkinch (14 miles south-east), Dingwall (6 miles east), Alness (15 miles north-east), Crown (15 miles south-east) and Millburn (15 miles south-east). For island and remote addresses, the job takes a little more planning, so let us know when you get in touch.
What’s near Contin
For rail, the closest station is Garve station, about 4.7 miles north-west of the centre. Nearby you’ll also find Highland Museum of Childhood (1.8 miles north-east) and Brahan Castle (3.7 miles south-east). The countryside around Contin includes Loch na Crann and Tollie Red Kites RSPB Reserve.
What we cannot put right
Some problems need a builder, plumber or other trade rather than us:
- A broken pane or roof panel
- Condensation trapped between two panes
- Structural problems with a conservatory roof
If in doubt, email us at info@mrmastic.co.uk and we will say what we think before you book.
Where we work in Contin
- Glass balustrade bases
- Conservatory frames
- Rooflights
- Glass-to-glass joints
- Glass-to-frame joints
- Shower screens
Places near Contin
Other services in Contin
Your questions about glazing silicone in Contin
Do you cover smaller places like Contin?
Yes, Contin is covered. We work across all of Scotland, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is Contin in your area for glazing silicone?
Yes. Our work covers the whole of Scotland, and Contin is part of that. You can send an email to info@mrmastic.co.uk and tell us what needs doing, and we’ll give you a clear quote.
Should I try DIY first?
For a simple, easy-to-reach joint, a careful DIYer can do a reasonable job. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.
Can I choose the sealant colour?
In most cases you can choose. We will explain which colours are available and agree one before any work starts.
Do you take out the old sealant first?
Yes, every time. New silicone does not stick to old silicone, so the joint is cleaned back first.
What information do you need?
Let us know what needs doing and where, plus pictures if you have them. We will ask anything else we need to know.
Is balustrade sealant something you do?
Yes. The sealant joint at the base can be renewed. We do not install or replace the glass.
Are you ARBOMaster approved?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
Looking after it afterwards
Good habits help new joints last longer. Our tips:
- Avoid strong solvents on or near the sealant
- Check the gutters above the glazing for debris
- Act on drips or damp patches early
- Stick to mild cleaners on glass
Keep conservatory gutters clear so water doesn’t back up against the seals. Overflowing gutters can cause leaks of their own.
Don’t leave lifting or mouldy silicone on glazing. Peeling silicone lets water in behind and the leak gets worse.
How the visit works
On the day, there’s very little for you to do. Show us the job and we’ll take it from there. The job generally takes a few hours for most jobs, including the tidy-up. Outdoor work around Contin depends on the weather, as sealant needs a dry surface, so an outdoor job can move if the forecast changes. Indoor work goes ahead whatever the weather.
- We start by finding the leak and making sure sealant is the cause.
- We cut out the failed silicone, taking care of the glass and frame.
- Surfaces are cleaned with a solvent suited to glass and the frame.
- New glazing silicone goes in and is tooled to a neat finish.
- We check the joints and, where safe, run water over them.
Preparing for the visit
- For business premises, tell us about site rules or sign-in
- Let us know about earlier repairs to the joints
- Move anything stored near the joints
Getting a quote
Asking for a quote is easy: tell us what needs doing and where, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll come back to you with a quote.
Related advice
Different surfaces, different methods
Glass balustrade bases
The base of a glass balustrade is generally sealed. Failed sealant there lets water collect.
Conservatory frames
Leaks often start where the frame meets the wall. We cut out the old sealant and reseal.
Quotes for glazing silicone in Contin
Jobs vary more than people expect. The main factors:
- The amount of work
- How much old sealant there is and how hard it is to remove
- The number of rooms or windows
- Any mould that needs treating
Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Helping us quote
When you call or email, these details help:
- A few pictures by email, if you can
- The problem you’ve noticed
- How many joints, rooms or windows are involved
- Whether it’s a home or a business
Need a quote? Please drop us a line at info@mrmastic.co.uk and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Why act early in Contin
Leaks get worse, not better. Water can damage frames, walls, flooring and furniture, so it pays to deal with it early. In an older home around Contin, damp from a failed joint can get into timber and plaster, which is a far bigger job than the sealant.
The cost depends on the amount of work, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
Why Contin clients choose us
- White, clear, grey or another colour, product permitting
- An ARBOMaster approved applicator
- Tidy, careful work
- More than 20 years in sealant work