Kent · England

Glazing Silicone in Chislet

Glazing joints in Chislet need attention? We cut out the old, prepare the joints and apply the right sealant, and the work is guaranteed for a year.

  • Leaks from the base of a shower screen
  • New silicone smeared over old sealant
  • Failed joints on frameless glass

Need glazing silicone in Chislet?

Glazing silicone in Chislet

We do not replace glass and a misted double-glazed unit needs a glazier. Our work is the sealant joints and that is often where the water gets in. Common call-outs are for drips on the inside of a conservatory window and conservatory leaks at frame and glazing joints, across rooflights, conservatory frames and glass-to-frame joints.

Mastic can only go onto a dry, clean joint, so window work in Chislet is booked around the forecast. Let us know about access to all the frames, upstairs ones included.

We guarantee the work for a year. If something is not right with it in that time, tell us and we will put it right.

Applicator reaching up to seal an external door frame on a sunny day
Location
Chislet (CT3)
Wider area
Kent
Cover
A year, on every job
Quote
Quoted before any work starts
Telephone
0345 464 0079
Updated
26 October 2026

How the visit works

We bring everything the job needs with us. Once we have agreed what’s being done, we protect the area and start. Most jobs take a few hours, depending on how many joints need doing. In a small place like Chislet, access is normally the main thing to plan. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We find where water is getting in and check whether it’s a sealant joint.
  2. Old silicone is cut away from the glass and frame without scratching either.
  3. We clean the joint with a solvent that suits the glass and frame.
  4. Glazing silicone suited to the joint is applied and tooled.
  5. The finished joints are checked and, where it’s safe, tested with water.

Preparing for the visit

  • Mention any sign-in or site rules at work premises
  • Mention any tricky access
  • For indoor joints, keep the area dry beforehand if you can

Getting a quote

Asking for a quote is easy: tell us what needs doing and where and its rough size. Photos by email help us understand the job, and we’ll come back to you with a quote.

Get a price

Read more

FAQs for Chislet

Do you cover smaller places like Chislet?

Yes, we do. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.

Does living near the coast affect glazing silicone in Chislet?

Coastal homes put outside sealant through more weather than inland ones, so preparation and the right sealant matter all the more. Walls facing the sea are usually the first to need attention.

Which silicone is used for glass joints?

A neutral-cure glazing silicone suited to glass and the frame. Shower screens get anti-fungal silicone.

Do you take out the old sealant first?

Yes, every time. New silicone doesn’t stick to old silicone, so any old material comes out before anything new goes in.

When is the sealant fully cured?

Different products cure at different speeds, so follow the cure time we give you.

Is it worth trying it myself?

Some simple jobs can be done by a careful DIYer. Most DIY failures come from sealing over old material, wet joints or too much sealant.

Are you fully insured?

Yes. We’re fully insured for every job we do.

Do you reseal glass shower screens?

Yes. We remove the old silicone carefully, and the joints are cleaned and resealed.

What we cannot put right

We will not take on work that won’t last, so here’s what sealant cannot put right:

  • A roof that has moved or dropped
  • Frames that have decayed or split
  • Glass that needs replacing

Not sure which it is? You can phone 0345 464 0079 or send us an email and we will tell you honestly before you book.

Surfaces we seal

  • Shower screens
  • Glass-to-frame joints
  • Glass-to-glass joints
  • Conservatory frames
  • Rooflights
  • Glass balustrade bases

How the job changes by surface

Glass-to-glass joints

Where two panes meet, the silicone joint takes all the movement. The bead needs to be tidy and fully bonded.

Glass balustrade bases

We reseal the joint where the glass meets the base channel. We do not install or replace glass.

Should I try it myself first?

A DIY attempt doesn’t rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.

Sealing over old silicone is the commonest DIY error. Silicone doesn’t stick to old silicone, so it lifts and traps water and mould underneath. Everything old must be removed first.

What affects the cost of glazing silicone

We quote each job individually. These are the things that affect it:

  • Any mould that needs treating
  • The number and length of the joints
  • The product the joint needs
  • The old material and how stubborn it is

We don’t show prices on the website, because the cost depends so much on the job itself. For a quick quote, please ring 0345 464 0079 or drop us an email and we will talk you through it.

What we need to know

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • The address or postcode of the job
  • Access, such as stairs, a lift or height
  • If it’s domestic, commercial or a hotel
  • Pictures of the joints, sent by email

If you’re in Chislet and need glazing silicone, call 0345 464 0079 or email us. Tell us what the problem is and where, and you’ll get a clear quote before we start.

What happens if it’s left?

Dealing with a leaking shower screen early protects the floor and ceiling. A small leak can reach the floor below before it shows. In a small place like Chislet, homes can be exposed to wind and rain, which finds any gap, and older walls, once damp, take a long time to dry.

Every job is a little different, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we will explain the quote if you ask.

Why us?

  • Rated 4.9 stars on Google
  • White, clear, grey or coloured to suit, where the product allows
  • We never seal over old sealant
  • Fully insured

Read what affects the cost and customer reviews.

Glazing silicone in Chislet: local notes

Chislet is close to the coast, where wind-driven rain is a fact of life and, nearer the shore, so is salt air. That’s hard on glazing joints and frame seals, especially on the side facing the sea. Compared with the north and west, the South East gets less rain, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.

For landlords with property near Herne Bay station, a shower screen or conservatory joint that leaks is easier to reseal while the property is empty. For site and facilities teams at buildings such as Chislet Church of England Primary School, its window and door frames need their mastic kept sound, just like a home’s.

Chislet is about 3 miles south-east of Herne Bay, in Kent. Homes, rented property, offices and hotels in Chislet can book us for glazing silicone. Every job comes with our 12-month guarantee. Across Kent, we cover 922 places, and Chislet is one of them. We also work in Chelmsford, about 41 miles from Chislet.

Work in CT3 is quoted and booked the same way as anywhere else. We also cover Hollow Street (1 mile south-west), Chitty (1 mile east), Boyden Gate (1 mile north), Old Tree (1 mile west) and Hoath (1 mile west). We also work in nearby towns such as Canterbury (6 miles south-west), Margate (9 miles east), Dover (14 miles south), Ramsgate (10 miles east), Broadstairs (10 miles east) and Whitstable (7 miles west).

Around Chislet

We work in homes and buildings around Grove Ferry Picnic Area and the streets around them. The nearest railway station is Herne Bay station, roughly 3.7 miles north-west. Nearby you’ll also find St Martins Hospital (5.5 miles south-west). Open spaces near Chislet include West Blean and Thornden Woods.

Map of Chislet © OpenStreetMap contributors

Signs you need glazing silicone in Chislet

New silicone over old silicone won’t bond. Many failed joints we see have been topped up rather than cut out, and water gets between the layers.

Common reasons people contact us are:

  • Glass-to-glass joints that have split
  • Glazing silicone that has cracked or come away
  • Drips on the inside of a conservatory window
  • Failed sealant around rooflight glass

Homes close to Church of St Mary the Virgin include some older properties, and the windows may be timber, sash or later replacements, and each needs the right sealant against the wall.

Comparing quotes

  • How long the guarantee is
  • What the quote includes, VAT included or not
  • What preparation is included
  • Who turns up on the day

10 questions to ask before booking

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job