Medway · England
Burham Glazing Silicone
Glazing joints in Burham need attention? We cut out the old, prepare the joints and apply the right sealant.
- Leaking glazing joints on a rooflight
- Black or yellowed silicone on glass joints
- New silicone smeared over old sealant
Signs you need glazing silicone in Burham
Sealant laid over old sealant doesn’t last. Plenty of leaks come from a quick top-up over the old bead, and water gets between the layers.
Common reasons people contact us include:
- Water getting into a conservatory at the joints
- Failed sealant around rooflight glass
- New silicone smeared over old sealant
- Split or lifting silicone on glass
Schools such as Burham Church of England Primary School are buildings too, and its window and door frames need their mastic kept sound, just like a home’s.
Before you book anyone
- Whether they’re fully insured
- How long the guarantee is
- Who does the work, and how experienced they are
- Whether VAT is included
How we handle glazing silicone in Burham
Glazing silicone that has yellowed, blackened or come away looks poor and can leak. It comes off cleanly, without marking the glass and reseal the joint. Common call-outs are for cracked silicone between glass panels and drips on the inside of a conservatory window, on rooflights, glass-to-frame joints and shower screens.
Mastic can only go onto a dry, clean joint, so window work in Burham is booked around the forecast. Tell us about access to every side of the house, including upper-floor windows.
A 12-month guarantee comes as standard, so you’re covered after we have gone.
- Place
- Burham (ME1)
- Wider area
- Medway
- Cover
- One year on every job
- Quote
- A clear quote up front
- Telephone
- 0345 464 0079
- Updated
- 26 October 2026
When it is not the sealant
It helps to know what we can’t do:
- A roof that has moved or dropped
- Leaks from the roof covering or flashing (a roofer’s job)
- A broken pane or roof panel
If in doubt, phone 0345 464 0079 or send us an email and we’ll say what we think before booking.
Joints and surfaces we work on
- Glass-to-frame joints
- Shower screens
- Glass-to-glass joints
- Rooflights
- Conservatory frames
- Glass balustrade bases
How it works
When we arrive, we start by going over the job with you. Surfaces next to the work are protected before we start. The work usually takes anything from an hour or two to most of a day, depending on the size of the job. Somewhere as small as Burham, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We find where water is getting in and check whether it’s a sealant joint.
- Old silicone is cut away from the glass and frame without scratching either.
- The glass and frame are cleaned and degreased.
- We apply a neutral-cure glazing silicone and tool it smooth.
- We check the joints and, where safe, run water over them.
How to prepare
- Mention if the joints have been sealed before
- On commercial sites, let us know about site rules
- Let us know if you’ve seen damp or leaks
Ask for a quote
Every job is quoted individually, so the first step is telling us about yours. Simply ring 0345 464 0079 or drop us an email and describe the job and send photos if you have them.
Related advice
Towns and villages near Burham
More services for Burham
Burham questions
Is Burham in your area for glazing silicone?
Yes, Burham is within the area we cover. Our work covers London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear quote.
I let a flat near Snodland station. Can you help?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we’ll give you a clear price.
How long before the joint can be used?
Cure times vary by product and the conditions. We tell you how long to leave it before we go.
Do the sealants smell?
Possibly a little. Any smell clears as the sealant cures.
Can a conservatory leak be sealed?
Yes, when the leak is a failed sealant joint. If it’s a broken panel, failed unit or roof problem, we’ll tell you.
Where are you based?
We’re based in Crawley, West Sussex, and we cover South East England, London and all of Scotland.
Should I try DIY first?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.
Do you work for hotels and businesses?
Yes. We have worked for hotels, offices and other businesses.
How the job changes by surface
Shower screens
Mouldy or lifting sealant on a screen leaks. A full reseal sorts it.
Glass balustrade bases
Glass balustrades sit in a channel that is often finished with sealant. Failed sealant there lets water collect.
Can I do it myself?
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it fails, we can still redo it.
What glazing silicone looks like in Burham
Rainfall in the South East is lower than in much of the UK, yet outdoor joints still have to be sealed dry, so jobs are booked with the weather in mind. With historic houses such as Starkey Castle (about 2.4 miles north) nearby, there’s older building stock in the area around Burham as well as newer homes. In older buildings, older frames set in brick or stone need a sealant that suits them, and sometimes that is traditional sand mastic.
If you let a flat or house near Snodland station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies. In the older streets around St Mary's Church, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
Burham is about 3 miles south-west of Chatham, in Medway. Every kind of property in Burham is covered for glazing silicone. The work is guaranteed for a year. Across Medway, we cover 68 places, and Burham is one of them. There’s also a page for London, about 27 miles away.
Our applicators cover all of the ME1 postcode area for glazing silicone. That includes homes and businesses on New Road, St Mary's Walk and Brisley's Row. Neighbouring places we cover for glazing silicone include Scarborough (1 mile north-west), Eccles (1 mile south), Peters Village (1 mile north-west), Holborough (2 miles west) and Wouldham (2 miles north-west). Within a short drive, we also cover Gillingham (5 miles north-east), Chatham (3 miles north-east), Rochester (4 miles north), Rainham (6 miles east), Strood (4 miles north) and Luton (4 miles north-east).
What’s near Burham
In Burham, that means homes and buildings near The Windmill pub, The Holmesdale School and Burham Marsh and the streets around them. Burham’s nearest station is Snodland station, roughly 1.3 miles west of the centre. A little further out are St. Catherine's Hospital (3.8 miles north) and Medway megaliths (1.3 miles south-east). The countryside around Burham includes Burham Down and Blue Bell Hill.
What affects the cost of glazing silicone
Your quote is based on your job. We look at:
- How many areas need sealing
- Any working-time requirements on site
- The size of the job
- The type of sealant required
Every job is a little different, so each one gets its own quote. The number of joints, how easy they are to reach and the sealant needed all make a difference, and we’ll explain the quote if you ask.
What we need to know
To help us quote quickly, let us know:
- The rough size of the job
- Where the job is, and your postcode
- Any previous sealing or DIY work
- The problem you’ve noticed
Need a quote? Please call 0345 464 0079 or send us an email and tell us about the job. You will know what we plan to do, and what it will cost, before any work begins.
Looking after it afterwards
How long the joints last depends on use and care. Here’s what we suggest:
- Keep air moving in the conservatory
- Clear the conservatory gutters regularly
- Do not use a blade near the sealant
- Check the silicone on glass every year or so
On shower screens, wipe or squeegee after use and keep the room ventilated. That slows mould growth on the bead.
Damp patches, drips and condensation along a joint are worth checking. The cause may be sealant or another part and we will find out which.