Kent · England
Anvil Green Glazing Silicone
Glazing silicone for Anvil Green and the surrounding area: the right sealant, proper preparation and a neat finish. Call for a quick quote.
- Mouldy sealant around glass panels
- Failed sealant around rooflight glass
- Water escaping where a screen meets the wall
Glazing silicone in Anvil Green
Our work covers conservatory joints, rooflights and glass panels, as well as frameless shower screens and glass balustrade bases. The old sealant comes out, the joint is cleaned and new silicone goes in. We work on glass-to-frame joints, glass balustrade bases and conservatory frames, and common reasons people get in touch are leaking glazing joints on a rooflight and new silicone smeared over old sealant.
Homes in small places like Anvil Green often stand in the open, with little to shelter their windows from wind and rain. That exposure dries out and cracks the mastic around frames and sills faster.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Place
- Anvil Green (CT4)
- Region
- Kent
- Guarantee
- One year on every job
- Price
- A clear price before work begins
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What we can’t put right
Sealant is not the answer to every problem, and we’d rather say so up front. Sealant won’t put right:
- Cracked or broken glass
- Frames that have decayed or split
- Misting between the panes of a double-glazed unit (a failed unit for a glazier)
If you’re not sure, just call 0345 464 0079 or drop us an email and we’ll give you a straight answer.
Where we work in Anvil Green
- Shower screens
- Rooflights
- Glass-to-frame joints
- Conservatory frames
- Glass-to-glass joints
- Glass balustrade bases
What we do, step by step
Before we leave, we go over the finished joints with you and tell you how long to leave it. The work normally takes a few hours, depending on how many joints need doing, depending on the size of the job. In a small place like Anvil Green, access is usually the main thing to plan. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- We start by finding the leak and making sure sealant is the cause.
- The old sealant is removed from the glass and frame without scratching them.
- We clean the joint with a solvent that suits the glass and frame.
- New glazing silicone goes in and is tooled to a neat finish.
- We look over every joint and, where we can, test it with water.
Before we arrive
- On commercial sites, let us know about site rules
- Keep children and pets away from the work area
- Let us know about stairs, lifts or work at height
Get a quote
The more we know about the job, the more useful the quote. Tell us where the job is, what’s wrong and how much there is, and email pictures if that is easy.
Advice
Looking after it afterwards
To keep the joints looking good and working properly:
- Inspect the sealant on glazing annually
- Clean glass with a mild cleaner and a soft cloth
- Get a new leak looked at quickly
- Avoid strong solvents on or near the sealant
Check the joints once a year. Spotting a crack early means a simpler fix.
A small conservatory leak soon spreads. Water runs along frames and down walls so it’s best dealt with right away.
What affects the quote in Anvil Green
The quote reflects the job in front of us. We look at:
- Whether there’s mould to deal with
- How easy the joints are to reach
- How many areas need sealing
- The number and length of the joints
Rather than a set price list, we price the job in front of us: the amount of work, the old material and the access. The price is agreed before we begin.
What we need to know
Before you ask for a quote, have a think about:
- Photos by email, if that is easy
- Where the job is, and your postcode
- How many joints, rooms or windows are involved
- What’s wrong with the joints now
Every job is quoted individually. Just call 0345 464 0079 or drop us an email with the details and send photos if you have them.
FAQs for Anvil Green
Do you work for landlords with property near Chilham station?
Yes, rental work is part of what we do. Just phone 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Is Anvil Green within the area you cover?
Yes. Anvil Green is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
How much does glazing silicone cost in Anvil Green?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
How long does glazing silicone take?
Most jobs take a few hours for most jobs. Your quote will say how long we expect yours to take.
Is a special sealant needed for glass?
A neutral-cure glazing silicone that suits the glass and frame. In bathrooms, we use anti-fungal silicone.
Which products do you use?
Quality sealants from brands including Arbo and Everbuild, picked for each joint. We explain the product when we quote.
Will resealing stop my conservatory leaking?
In many cases, as long as sealant is the cause. We find where the water gets in first before any sealing.
Do the sealants smell?
There can be a smell while the sealant cures. Ventilation helps.
Frames and glazing around Anvil Green
London and the South East are among the drier parts of the UK, but outside sealant still needs a dry, clean surface, so outdoor work is planned around the forecast.
If you let a flat or house near Chilham station, leaking glazing joints, shower screens or conservatory seals are worth sorting between tenancies.
Anvil Green is about 5 miles south-west of Wincheap, in Kent. From the centre of Anvil Green to the outskirts, we cover glazing silicone for every kind of property, from flats and houses to offices and hotels. Our area takes in 922 places across Kent. Our Chelmsford page covers work nearby (43 miles or so).
Work in CT4 works the same way as everywhere else we cover. Neighbouring places we cover for glazing silicone include Petham (2 miles north-east), Garlinge Green (2 miles north), Mystole (3 miles north), Upper Hardres (3 miles east) and Shalmsford Street (3 miles north). We also work in nearby towns such as Ashford (8 miles south-west), Canterbury (6 miles north-east), Dover (13 miles east), Sittingbourne (15 miles north-west), Folkestone (11 miles south-east) and Whitstable (10 miles north).
Local landmarks in Anvil Green
Typical jobs here are in homes near Compasses Inn, among other places. The nearest railway station is Chilham station, roughly 3.1 miles north-west of the centre. A little further out are Chilham Castle (3.5 miles north-west) and Kent and Canterbury Hospital (5.1 miles north-east).
Signs you need glazing silicone in Anvil Green
Using a sealant not made for glass causes many failures. Some products don’t bond well to glass, and acetoxy types can attack some frame materials.
If you can see any of these, it’s time to have the joints looked at:
- Rooflight joints letting water in
- Glazing silicone that has cracked or come away
- Water running down inside the glass
- New silicone smeared over old sealant
For an older house near a landmark such as Church of St Bartholomew, frames set in older brick or stone need a sealant that suits the wall as well as the frame.
What to look for in a quote
- Which sealant they’ll use, and why
- How the colour is chosen
- Are they insured?
- How long the guarantee is
Towns and villages near Anvil Green
What else we do in Anvil Green
Why it’s worth doing now in Anvil Green
Fixing a leaking screen early protects what’s underneath. Water from a failed joint can soak into the floor before you notice. Where a wall is exposed, as many are in small places like Anvil Green, wind-driven rain gets into any failed joint, and older walls, once damp, take a long time to dry.
No two jobs are quite the same, so we quote each one individually. The number of joints, how easy they are to reach and the sealant needed all play a part.
Why us?
- More than 20 years in sealant work
- Colour agreed with you before we start
- ARBOMaster approved applicator
- Every job guaranteed for a year
Read how sealant jobs are priced or our reviews.
Can I do it myself?
If you are set on DIY, put the effort into preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
A careful DIYer can reseal a simple joint, such as a straightforward joint indoors. Where it goes wrong is sealing over the old bead, working on a wet joint or overloading the gap.