West Sussex · England
Floor & skirting joints in Toddington, West Sussex
Professional floor joint sealing in and around Toddington, with old sealant always removed completely and a 12-month guarantee.
- Grout cracking in a straight line across a floor
- Rigid edge joints in tiled floors
- Dirt and water collecting in open floor joints
Floor joint sealing in Toddington, done properly
Thresholds are where two floors, or a floor and a door, meet. We use a flexible product that suits both floors in a colour to suit. Common call-outs are for chipped and open joints in warehouse floors and gaps between floors and kitchen plinths, on commercial floors, concrete floor joints and tiled floors.
If you’ve bought a new home in or near Toddington, the first year or two is a good time to check the sealant. Gaps at skirtings, shower seals pulling away and missing mastic around frames are common snags.
We guarantee the work for a year. If there’s a problem with our work within the year, let us know and we’ll sort it.
- Place
- Toddington (BN17)
- Wider area
- West Sussex
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
How to look after the new joints
Looking after new joints is easy, and it makes a real difference:
- Use a well-wrung mop rather than flooding the floor
- Look at floor joints each spring
- Lift furniture rather than dragging it across joints
- Sweep along the edges of the floor
Silicone sealant isn’t made to take paint. If the joint will be painted, tell us beforehand so we use a paintable sealant.
A gap under the skirting collects dust and lets draughts through. Sealing it early keeps the room cleaner.
Floor joint sealing around Toddington
Floors around West Sussex run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.
If you look after a building such as Lyminster Primary School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up. If you let a flat or house near Littlehampton station, gaps at skirtings and thresholds are worth sealing between tenancies. Community buildings like All Saints are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.
Toddington is about 1 mile north of Littlehampton, in West Sussex. Jobs in Toddington get the same care as everywhere else we work: old sealant removed completely, careful preparation and a one-year guarantee. We cover 371 towns and villages across West Sussex, large and small. Brighton is on our list too, about 18 miles from Toddington.
Work in BN17 is quoted and booked the same way as anywhere else. We cover properties on Toddington Lane, Hide Close and Hollist Chase. Close by, we work in Lyminster (1 mile north-west), Wick (1 mile west), Littlehampton (1 mile south), Poling (1 mile north-east) and Rustington (1 mile south-east). We also work in nearby towns such as Worthing (6 miles east), Bognor Regis (7 miles west), Chichester (11 miles west), Selsey (13 miles south-west), Shoreham-by-Sea (12 miles east) and Lancing (9 miles east).
Near you in Toddington
Around Toddington, our work takes us to homes and buildings near Littlehampton College, Mewsbrook Park and Locomotive Public House, among other places. The nearest railway station is Littlehampton station, roughly 1.1 miles south-west. Nearby you will also find Zachary Merton Hospital (1.8 miles south-east) and Rustington Museum (1.6 miles south-east). Green spaces nearby include WWT Arundel and Highdown Hill.
Quotes for floor joint sealing in Toddington
You will get a clear quote before any work starts. It’s based on:
- How easy the joints are to reach
- The old material and how stubborn it is
- How many areas need sealing
- Mould in or behind the old joints
Leaving a failed joint usually makes the job bigger, not smaller. If you’re not sure whether it needs doing, call 0345 464 0079 or drop us an email and we’ll give you an honest view and a quote.
Helping us quote
There’s no need for technical detail. It helps if you can tell us:
- If it’s domestic, commercial or a hotel
- Pictures of the joints, sent by email
- Any previous sealing or DIY work
- Any access issues, like height or stairs
Need a quote? Please ring 0345 464 0079 or drop us an email and tell us about the job. You’ll know what we plan to do, and what it will cost, before any work begins.
Surface by surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Commercial floors
In commercial buildings, we can plan floor joint work around opening hours. Out-of-hours working can be arranged where it’s needed.
What sealant work cannot fix
We’d rather tell you now than do work that will not last, so here’s what sealant can’t put right:
- Tiles that have lifted or broken
- Large cracks that need a surveyor
- Water getting under the tiles from elsewhere
If you’re not sure, just call 0345 464 0079 or drop us an email and we will give you a straight answer before booking.
Joints and surfaces we work on
- Wet room & bathroom floors
- Commercial floors
- Concrete floor joints
- Thresholds
- Tiled floors
- Skirting boards
Also near Toddington
Also in Toddington
The process
We bring everything the job needs with us, so there’s nothing for you to buy. Once we have agreed what’s being done, we protect the area and start. Most jobs take a few hours for most rooms, longer for large commercial floors. In a smaller place like Toddington, parking is seldom the issue; lanes, gates and long drives are worth mentioning. If the job is outside, tell us about side access and how high the joints are.
- We clear the edges of the floor so the joints are easy to reach.
- Old material is removed from the joint.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor.
- Finally, we check the work and talk you through aftercare.
Before we arrive
- Mention if the joints have been sealed before
- Where the joints are inside, avoid wetting them before we arrive
- Keep pets and children clear of the area while we work
How to get a quote
There’s no standard price list, because every job is different. Instead, your job gets its own clear quote. To get started, call 0345 464 0079 or email us.
Read more
Work for landlords, hotels and businesses
We also work for property managers and facilities teams in Toddington and across West Sussex. Several sites can be quoted together.
If you manage several properties in or around Toddington, jobs at different addresses can be quoted together. Just tell us the addresses and what each one needs, and pictures by email help.
Toddington: your questions answered
Can you do floor joint sealing in Toddington?
Yes. Our work covers London and the South East, and Toddington is part of that. Just phone 0345 464 0079 or drop us an email with a few details of the job, and we will give you a clear price.
Do you work for landlords with property near Littlehampton station?
Yes, we work for landlords and agents. You can phone 0345 464 0079 or send us an email with the address and a few details, and we will give you a fixed price before we start.
What should I tell you?
Just the basics: the address or postcode, what’s wrong and any access issues. After that, simply phone 0345 464 0079 or email us.
Do you offer different sealant colours?
Normally, yes. Sealants come in white, clear, grey and other colours, and we agree the colour with you before any work starts.
Is it worth trying it myself?
That depends on the joint. Work at height, movement joints, fire-rated gaps and large areas are best left to a professional.
Will you leave a mess?
No. We protect the surfaces around the joints, and we tidy up before we go.
Can you seal where the floor meets the bath panel?
Yes. Where a floor meets a bath panel, kitchen plinth or skirting in a wet area, we use a flexible silicone.
Are you an approved applicator?
Yes. We’re an ARBOMaster approved applicator.
Should I try it myself first?
If you’re set on DIY, put the effort into preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.