Hampshire · England
Tinkers Cross Floor Joint Sealing
Floor joints in Tinkers Cross need attention? We remove the old material, prepare the joints and seal them properly, and the work is guaranteed for a year.
- Failed joint filler in concrete floors
- Open gaps along the bottom of skirting boards
- Gaps between floors and kitchen plinths
Floor joint sealing for homes and businesses in Tinkers Cross
Large tiled floors, and those over underfloor heating, often need movement joints. We can turn a line of grout into a movement joint by replacing it with flexible sealant. If you’re dealing with gaps between floors and kitchen plinths and cracked grout where a tiled floor needs a movement joint, we can put it right, whatever the surface.
Around Tinkers Cross, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
You get a 12-month guarantee, the same in Tinkers Cross as everywhere else we work.
- Where
- Tinkers Cross (SP6)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quotes
- A clear price before any work starts
- Telephone
- 0345 464 0079
- Page updated
- 26 October 2026
When it is not the sealant
We’ll always be straight with you, so here’s what sealant can’t fix:
- Loose, hollow or cracked tiles, which need a tiler
- Cracked or broken concrete slabs
- Structural movement or subsidence
If you are not sure, just phone 0345 464 0079 or send us an email and we will give you a straight answer before you book.
Joints and surfaces we work on
- Wet room & bathroom floors
- Skirting boards
- Concrete floor joints
- Tiled floors
- Thresholds
- Commercial floors
Work for landlords, hotels and businesses
For anyone letting property in or around Tinkers Cross, several properties can be quoted together. Just tell us the addresses and what each one needs.
We regularly work with letting and managing agents. Send the address, what’s needed and the access arrangements and we will give you a quote.
Looking after it afterwards
After the cure time, these simple habits help:
- Have a cracking tiled floor checked before tiles break
- Keep heavy wheels off new concrete joints until cured
- Look at floor joints each spring
- Lift furniture rather than dragging it across joints
Avoid flooding the floor when you clean. Less water at the edges helps the joints last.
In wet areas, an open floor joint lets water reach the subfloor. Resealing early keeps it out.
Also near Tinkers Cross
More services for Tinkers Cross
New homes and floors in Tinkers Cross
Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal.
In and around Tinkers Cross, as anywhere, good floor joint sealing starts with a clean, dry, properly prepared joint. Schools such as Fordingbridge Junior School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early.
Tinkers Cross is in Hampshire. Anywhere in SP6, we can carry out floor joint sealing at your property. Tinkers Cross is one of 683 towns and villages in Hampshire we cover for floor joint sealing. You can also see our page for Southampton, about 18 miles away.
Here we cover the SP6 postcode area for floor joint sealing. Whether your property is on Linguire Lane, Neave Road and Seton Way or a nearby road, we can help. If you’re just outside Tinkers Cross, we cover Lower Burgate (1 mile east), Fordingbridge (1 mile south), Upper Burgate (1 mile north-east), Horseport (1 mile south-east) and Criddlestyle (1 mile south-east). Within a short drive, we also cover Totton (13 miles east), Romsey (14 miles east), New Milton (14 miles south-east), Ringwood (6 miles south), Barton on Sea (15 miles south-east) and Marchwood (15 miles east).
Local landmarks in Tinkers Cross
We work in homes and buildings around The Ship Inn and The Burgate School and Sixth Form and the streets around them. Well-known places in the area include Fordingbridge Museum (0.8 miles south-east) and Godshill Castle Hill (1.5 miles east). Not far away are Blashford Lakes.
Questions from Tinkers Cross
Can you do floor joint sealing in Tinkers Cross?
Yes, Tinkers Cross is within the area we cover. Our work covers London and the South East. You can call 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.
Will you come out to Tinkers Cross?
Yes, Tinkers Cross is covered. We work across London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Is it worth trying it myself?
Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. If it doesn’t work out, we can redo it.
Do the sealants smell?
Some sealants have a smell while they cure, which fades as it sets. Opening a window helps.
Are you fully insured?
Yes, we’re fully insured for every job we do.
Do you seal warehouse floor joints?
Yes, from warehouses and units to offices and shops. We can plan around your opening times with out-of-hours work where needed.
Is caulk good enough for skirting?
Caulk can’t cope with movement or water. Skirting joints move with the floor, so we use a flexible sealant that stretches.
What sealant do you use?
The product depends on the job: anti-fungal sanitary silicone in wet areas, and other sealants where joints move or face the weather. We use products from Arbo and Everbuild.
The process
A visit follows a simple pattern: we check the joints, protect the area around them, carry out the job and clear up. It usually takes a few hours for most rooms, longer for large commercial floors. Somewhere as small as Tinkers Cross, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.
- First we check the joint and the floor and agree which sealant suits it.
- Whatever is in the joint now, whether caulk, grout or sealant, comes out.
- The joint is cleaned, vacuumed and backed where depth needs controlling.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- Finally we tool it smooth and explain when the floor can be used and cleaned.
How to prepare
- On commercial sites, let us know about site rules
- For indoor joints, keep the area dry beforehand if you can
- Let us know if you’ve seen damp or leaks
Get a quote
We quote each job on its own, so the first step is telling us about yours. Simply call 0345 464 0079 or drop us an email and describe the job.
Related advice
Quotes for floor joint sealing in Tinkers Cross
There’s no set price list, because jobs vary so much. The quote depends on:
- The number of rooms or windows
- How easy the joints are to reach
- Any mould that needs treating
- Working hours on commercial sites
What it costs depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You’ll have a clear quote before any work starts.
What to tell us for a quote
When you call or email, these details help:
- Pictures of the joints, sent by email
- The problem you’ve noticed
- The type of property
- Access, such as stairs, a lift or height
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will talk you through the work and give you a clear price.
Should I try it myself first?
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.
Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
How the job changes by surface
Tiled floors
Large or heated tiled floors need room to move. We replace grout with flexible sealant along the right lines coloured to suit.
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.