Highland · Scotland

Floor Joint Sealing in Strome Ferry

Professional floor joint sealing in and around Strome Ferry, with every bit of old sealant taken out first and a 12-month guarantee.

  • Skirting that has pulled away from the floor
  • Gaps at thresholds between rooms
  • Failed seals where bathroom floors meet baths and panels

Book floor joint sealing in Strome Ferry

Strome Ferry: your questions answered

Will you come out to Strome Ferry?

Yes, smaller places are covered as well as towns. We work across all of Scotland. Let us know about access, parking and anything unusual about getting there when you book.

Can you do floor joint sealing in Strome Ferry?

Yes, Strome Ferry is within the area we cover. Our work covers the whole of Scotland. Just drop us a line at info@mrmastic.co.uk with a few details of the job, and we’ll give you a clear price.

Which products do you use?

Each joint gets the product that suits it. Where it moves, gets wet or faces the weather makes a difference.

What causes gaps between the floor and skirting?

Usually it’s movement: timber drying in winter, floors settling, or caulk that cannot stretch. A flexible sealant stays closed as the floor moves.

What should I tell you?

Tell us what needs doing and where, plus photos if you have them. If we need more, we’ll ask.

Will the old sealant be removed?

Yes. Sealing over the old bead is the commonest cause of early failure, so we never do it.

Can grout be replaced with sealant on a tiled floor?

Often, yes. We replace the grout along a suitable line with flexible sealant coloured to suit. If tiles are loose, that needs fixing first.

Are you ARBOMaster approved?

Yes. Mr Mastic is an ARBOMaster approved applicator, and we are fully insured.

Floor joint sealing in Strome Ferry, done properly

Floor joint sealing is mostly about choosing the right product and preparing the joint. We remove what’s there first, the joint is cleaned and backed where needed, then the new sealant goes in. We work on tiled floors, wet room & bathroom floors and concrete floor joints, and people most often call us about cracked grout where a tiled floor needs a movement joint and open joints around bathroom floor edges.

Many newer homes in Scotland are timber-framed and settle as they dry out, so skirting and floor joints can open up. Older stone-built homes, meanwhile, often have timber floors that move with the seasons.

The work is covered for a year after we finish. If there’s a problem with it, please drop us a line at info@mrmastic.co.uk.

The Mr Mastic team in navy uniforms in front of three Mr Mastic vans
Place
Strome Ferry (IV53)
Wider area
Highland
Guarantee
One year on every job
Quotes
A clear quote up front
Email
info@mrmastic.co.uk
Page updated
26 October 2026

Leave it or put it right?

The right product depends on the floor and the traffic: skirting and tiled floors need flexibility, wet areas need water resistance and concrete needs a product suited to wheels. Using the wrong one is why many floor joints fail. In an older home around Strome Ferry, damp from a failed joint can get into timber and plaster.

The cost reflects the work involved, not guesswork. That’s why we ask about the job first and give you a clear quote before work begins.

What you get with us

  • Anti-fungal silicone where joints get wet
  • Fully insured
  • We never seal over old sealant
  • Every job guaranteed for a year

Take a look at how sealant jobs are priced and what customers say.

Quotes for floor joint sealing in Strome Ferry

The quote reflects the job in front of us. We look at:

  • Any mould that needs treating
  • The number and length of the joints
  • Access and height
  • When we can work, for business premises

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re not sure whether it needs doing, drop us a line at info@mrmastic.co.uk and we’ll give you an honest view and a quote.

Asking for a quote

You do not need to know the technical terms. Just tell us:

  • Roughly how big the job is
  • If someone has resealed it before
  • If it’s domestic, commercial or a hotel
  • Any access issues, like height or stairs

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and email pictures if that is easy.

Joints and finishes in Strome Ferry homes

Many new homes in Scotland are timber-framed, and as the frame dries and settles, skirting and sealant joints can open up. Across Highland, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.

For buildings such as Church Of Scotland, joints in its floors, skirtings and thresholds need resealing as they wear. Letting a property close to Stromeferry station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant.

Strome Ferry is in Highland. For floor joint sealing in and around Strome Ferry, please drop us a line at info@mrmastic.co.uk for a quick quote. We cover Highland from our Crawley base, Strome Ferry included. Across Highland, we cover 253 places, and Strome Ferry is one of them.

Our applicators cover all of the IV53 postcode area for floor joint sealing. Other places close to Strome Ferry include Plockton (4 miles west), Lochcarron (4 miles north-east), Auchtertyre (5 miles south), Bundalloch (5 miles south-east) and Carndu (5 miles south-east). Island and remote addresses take a little more planning, so please mention your location when you send an email to info@mrmastic.co.uk.

Local landmarks in Strome Ferry

There’s a railway station in Strome Ferry itself: Stromeferry station. Nearby you’ll also find Strome Castle (0.5 miles north). Not far away are Loch na Leitire.

Map of Strome Ferry © OpenStreetMap contributors

How to look after the new joints

Looking after new joints is easy:

  • Mark off resealed joints in warehouses
  • Keep caulk for dry, still joints only
  • Sweep along the edges of the floor
  • Act on grout cracks that run in a straight line

Follow the cure time before walking on or cleaning the joint. Light foot traffic is generally fine sooner than wet cleaning or wheels.

Cracks along tile grout lines come back unless the movement is dealt with. A flexible joint added early helps protect the tiles themselves.

DIY versus a professional finish

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

Surface by surface

Thresholds

Where a tiled floor meets timber or carpet, the joint takes movement from both sides. A flexible sealant bridges them.

Commercial floors

Floor joint work in businesses can be planned around your hours. We can arrange out-of-hours work where it’s needed.

When something else is needed

To be straight with you, some problems need a different trade:

  • Water getting under the tiles from elsewhere
  • Cracked or broken concrete slabs
  • Movement too big for a sealant joint

If in doubt, send an email to info@mrmastic.co.uk and we will say what we think before you book.

What we seal

  • Concrete floor joints
  • Thresholds
  • Skirting boards
  • Wet room & bathroom floors
  • Tiled floors
  • Commercial floors

What happens on the day

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a morning or an afternoon for most homes, and the area is left clean. For a place like Strome Ferry, longer drives are planned in advance. Tell us about tracks, gates, a ferry crossing or anything unusual about getting there.

  1. We look at the gap and the floor type and agree the right sealant.
  2. We take out any old caulk, sealant or grout along the line.
  3. The joint is vacuumed clean, with backing fitted wherever depth matters.
  4. We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
  5. The joint is tooled to a neat finish and we tell you when it can take feet and a mop.

Before we arrive

  • Tell us about any previous sealing or DIY attempts
  • Mention any parking rules near the property
  • Move anything stored near the joints

How to get a quote

We do not publish a price list, as no two jobs are quite the same. Instead, your job gets its own clear quote. To arrange one, drop us a line at info@mrmastic.co.uk.

Get a quick quote

Related advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job