Kent · England

Floor & skirting joints in Moorstock, Kent

Problem with your floor joints in Moorstock? We remove the old material, prepare the joints and seal them properly, with a 12-month guarantee.

  • Dirt and water collecting in open floor joints
  • Rigid edge joints in tiled floors
  • Gaps at thresholds between rooms

Floor joint sealing in Moorstock

What affects the quote in Moorstock

For a quick quote, just ask. What matters most is:

  • Whether old sealant or filler has to be cut out
  • Working hours on commercial sites
  • The number and length of the joints
  • Which sealant suits the joint

The cost depends on how much there is to do, how hard the old material is to remove and access to the work. You will have a clear quote before any work starts, so you know where you stand.

Helping us quote

You do not need to know the technical terms. It helps if you can tell us:

  • How many joints, rooms or windows are involved
  • Whether it’s a home or a business
  • Access, such as stairs, a lift or height
  • The address or postcode of the job

Getting a quote is simple: let us know the job and the location, and roughly how big it is. A few pictures by email make the job easier to understand, and we will come back to you with a quote.

About our floor joint sealing in Moorstock

In commercial and industrial units, concrete floor joints take a hammering from wheels and traffic. We reseal them with a product chosen for the movement and the traffic. Common call-outs are for concrete floor joints that have broken down and cracked caulk along skirting in bathrooms and kitchens, across thresholds, wet room & bathroom floors and concrete floor joints.

For a small place like Moorstock, the journey and access are planned in advance, and the work itself is the same as on any site.

Every job is covered by a one-year guarantee, wherever you are in Kent.

Where
Moorstock (TN25)
Region
Kent
Cover
A year, on every job
Quotes
A clear quote up front
Call
0345 464 0079
Updated
26 October 2026
Mr Mastic applicators lined up beside the company vans, one holding a sealant gun

What floor joint sealing looks like in Moorstock

Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That is why the skirting and threshold joints need a flexible seal.

Rented homes near Westenhanger station change hands often, and a tidy floor and skirting joint helps a rental look ready for the next tenant. For site and facilities teams at buildings such as Sellindge Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early.

Moorstock is about 4 miles north-west of Hythe, in Kent. Moorstock gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a one-year guarantee. 922 places in Kent are on our list, from the larger towns to small villages. Our Chelmsford page covers work nearby (49 miles or so).

Here we cover the TN25 postcode area for floor joint sealing. We also cover the places around Moorstock: Sellindge (1 mile south), Stanford (2 miles south-east), Stowting (2 miles north-east), Postling (3 miles east) and Skeete (3 miles north-east). Within a short drive, we also cover Ashford (6 miles west), Canterbury (12 miles north), Dover (13 miles east), Folkestone (7 miles east), Faversham (15 miles north) and Hythe (4 miles south-east).

Local landmarks in Moorstock

The closest station to Moorstock is Westenhanger station, about 1.8 miles south-east of the centre. Well-known places in the area include William Harvey Hospital (4.5 miles north-west) and Lympne Castle (2.8 miles south). Open spaces near Moorstock include Tolsford Hill and Hatch Park.

Map of Moorstock © OpenStreetMap contributors

FAQs for Moorstock

Do you cover smaller places like Moorstock?

Yes. Moorstock is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

I let a flat near Westenhanger station. Can you help?

Yes, we work for landlords and agents. You can phone 0345 464 0079 or email us with the address and a few details, and we’ll give you a fixed price before work begins.

Do the sealants smell?

Possibly a little. It fades as the sealant cures, and ventilation helps.

Do you seal warehouse floor joints?

Yes. We clean out the joints and reseal them with a product suited to the floor. Let us know about the traffic when you ask for a quote.

Why has a gap opened under my skirting?

Movement from drying timber and settling floors opens the gap. Rigid fillers split, so we use a flexible sealant.

Can you seal where the floor meets the bath panel?

Yes. The old joint comes out and a flexible silicone replaces it, colour-matched where it shows.

Do I need to be at home?

We need access to the joints, so we will agree that with you when we book. For inside work, that normally means someone being in.

Can sealant along the skirting be painted?

Where you plan to paint, we do. Silicone does not take paint so mention it when you get a quote.

What the job involves on each surface

Commercial floors

Floor joint work in businesses can be planned around your hours. We can arrange out-of-hours work where it’s needed.

Thresholds

Thresholds between rooms meet two floors and often a door frame. We seal them with a flexible sealant that suits both sides.

Looking after it afterwards

Joint life depends on how it’s used and looked after. Here’s what we suggest:

  • Avoid sloshing water against skirting
  • Cone off fresh joints until they’re ready
  • Get cracks along tile grout lines looked at early
  • Do not slide heavy items over sealed joints

Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.

Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. Resealing early keeps it out.

Should I try it myself first?

What a professional job adds is preparation and the right product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, and the work is guaranteed for a year.

Overfilling a joint is a classic DIY mistake. A thick, smeared bead looks untidy and does not move well, and the joint depth matters as much as the finish.

The process

We keep the work tidy and contained to the area we’re working on, so you can carry on as normal. The job usually takes a morning or an afternoon for most homes, and we explain the cure time before we leave. Somewhere like Moorstock needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.

  1. The room is cleared along the joints so we can reach them.
  2. We take out the cracked caulk, grout or old sealant.
  3. Edges are cleaned and dried.
  4. A flexible sealant suited to the floor is applied and smooth it.
  5. We check the joints and explain the aftercare.

Getting ready for the visit

  • On commercial sites, let us know about site rules
  • Let us know about parking restrictions
  • Tell us about any water getting in

Get a quote

A good description makes for an accurate quote. Let us know the location, the problem and roughly how many joints, and add photos by email if you can.

Ask for a quote

Related advice

What we’re called out for in Moorstock

When a tiled floor has no movement joints, the grout takes the strain. You’ll see a crack running along the grout, where a flexible joint should have been.

Look out for any of the following:

  • Open gaps along the bottom of skirting boards
  • Failed seals where bathroom floors meet baths and panels
  • Cracked grout where a tiled floor needs a movement joint
  • Concrete floor joints that have broken down

Community buildings like Church of St Mary are part of the picture too: floor and skirting joints in halls and kitchens wear like any others.

What your quote should include

  • Whether you can choose the colour
  • What product goes in the joint
  • Whether all the old sealant comes out first
  • Who turns up on the day

Choosing a sealant specialist

What we can’t put right

To be straight with you, there are a few things sealant won’t fix:

  • Cracked or broken concrete slabs
  • Bouncy or failing floorboards
  • Loose, hollow or cracked tiles, which need a tiler

If you’re not sure, just ring 0345 464 0079 or send us an email and we’ll give you a straight answer before booking.

Surfaces we seal

  • Thresholds
  • Concrete floor joints
  • Wet room & bathroom floors
  • Tiled floors
  • Commercial floors
  • Skirting boards
20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job