Hampshire · England
Floor & skirting joints in Micheldever, Hampshire
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homeowners, landlords and businesses in Micheldever. Fully insured, ARBOMaster approved and guaranteed for a year.
- Rigid edge joints in tiled floors
- Concrete floor joints that have broken down
- Gaps between floors and kitchen plinths
About our floor joint sealing in Micheldever
Good floor joints come down to the right product and clean, prepared edges. We remove what’s there first, then clean, back and seal the joint. We work on tiled floors, concrete floor joints and skirting boards, and people most often call us about skirting caulk that keeps splitting and open joints around bathroom floor edges.
For a small place like Micheldever, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
The work is covered for a year after we finish. If there’s a problem with it, please phone 0345 464 0079 or drop us an email.
- Place
- Micheldever (SO21)
- Wider area
- Hampshire
- Guarantee
- A year, on every job
- Quote
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
When to call us in Micheldever
Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away until the joint widens.
It’s worth asking for a quote if you see:
- Cracked grout where a tiled floor needs a movement joint
- Gaps between floors and kitchen plinths
- Dirt and water collecting in open floor joints
- Caulk that has cracked where the floor moves
Letting a property close to Micheldever station? Then a tidy floor and skirting joint helps a rental look ready for the next tenant.
What your quote should include
- The length of the guarantee
- When the joint can take water or movement
- Whether you can choose the colour
- Whether VAT is included
Micheldever questions
Do you cover smaller places like Micheldever?
Yes. Micheldever is within the area we cover, which takes in towns, villages and rural addresses. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.
Is Micheldever in your area for floor joint sealing?
Yes, Micheldever is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job.
Do you use a paintable sealant?
Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone is not made to be painted, so it’s kept for wet areas and unpainted joints.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Does someone need to be in?
If the work is inside, we need someone to let us in. After that, you can carry on with your day.
Why has a gap opened under my skirting?
Timber floors and skirting shrink and swell through the year. We close it with a flexible sealant that moves with the floor.
Will you leave a mess?
No. The area is protected while we work and cleaned up afterwards.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with our work in that time, tell us and we’ll put it right.
Landlord and commercial work in Micheldever
Failed sealant is one of the commonest items on a check-out report, and it’s easy to sort out between tenants. Several properties can go on one quote.
Water getting past a failed joint can damage the building, which matters even more when someone else lives there. Resealing at the right time is simple maintenance.
Floor joint sealing around Micheldever
Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
If you look after a church, hall or community building such as Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear. Managing a site like Micheldever CofE Primary School? Then entrance and corridor floor joints take a lot of traffic.
Micheldever is about 7 miles north of Winchester, in Hampshire. Homes, rented property, offices and hotels in Micheldever is covered for floor joint sealing, old or new, large or small. The work is guaranteed for a year. Micheldever is one of 683 towns and villages in Hampshire where we work. For nearby work, see our Southampton page (17 miles or so).
Postcode districts we cover here for floor joint sealing: SO21. You’ll find streets such as Duke Street, Barron Close and Rook Lane. Neighbouring places we cover for floor joint sealing include Northbrook (1 mile north-west), East Stratton (2 miles east), Stoke Charity (2 miles west), Hunton (2 miles west) and Micheldever Station (2 miles north). Larger places within reach include Basingstoke (11 miles north-east), Winchester (7 miles south), Eastleigh (13 miles south), Andover (10 miles north-west), Chandler's Ford (13 miles south-west) and Alton (12 miles east).
Around Micheldever
Around Micheldever, our work takes us to homes and buildings near Half Moon and Spread Eagle pub and the streets around them. Micheldever’s nearest station is Micheldever station, roughly 2.2 miles north.
How the job changes by surface
Concrete floor joints
Hard wheels break down the edges of open joints. Sealing them supports the edges.
Wet room and bathroom floors
Wet room floors rely on sound joints at the walls. We reseal it with a flexible silicone suited to wet areas and we’ll say if the problem looks like more than the joint.
Can I do it myself?
If you do try it yourself, take your time over the preparation: take out all the old sealant, make sure the joint is clean and dry, and give it the full cure time. If it doesn’t work out, we can still put it right.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
When it isn’t the sealant
Before booking, it’s worth knowing the limits:
- Concrete repairs beyond the joint
- Large cracks that need a surveyor
- A tiled floor that needs relaying
If in doubt, ring 0345 464 0079 or drop us an email and we’ll say what we think before you book.
Surfaces we seal
- Skirting boards
- Wet room & bathroom floors
- Thresholds
- Concrete floor joints
- Tiled floors
- Commercial floors
How to look after the new joints
No joint lasts for ever, but care makes a real difference. Our tips:
- Cone off fresh joints until they’re ready
- Look at floor joints each spring
- Do not slide heavy items over sealed joints
- Do not paint over silicone
Keep heavy traffic off resealed concrete joints for the cure time we give you. Cone off the area if needed.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. Resealing early keeps it out.
What we do, step by step
There’s no need to move everything out before we come, just the space around the work. Everything nearby is protected, and the job takes a morning or an afternoon for most homes for a typical job. For a village or hamlet like Micheldever, the journey is planned in advance: let us know about lanes, gates and parking. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gap and the floor type and agree the right sealant.
- We take out any old caulk, sealant or grout along the line.
- We clean and vacuum the joint and fit backing where the depth needs setting.
- We apply a flexible sealant, or a floor-joint product on concrete, in a suitable colour.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
How to prepare
- Plan for the work area to be out of bounds to pets and children
- Mention if the joints have been sealed before
- Mention any parking rules near the property
Getting a quote
It all starts with a short chat. Tell us what’s wrong, where it is and how much there is. Whenever you’re ready, phone 0345 464 0079 or email us.