Hampshire · England

Floor Joint Sealing in Lyndhurst

Professional floor joint sealing in and around Lyndhurst, with old sealant always removed completely.

  • Failed seals where bathroom floors meet baths and panels
  • Rigid edge joints in tiled floors
  • Dirt and water collecting in open floor joints

Floor joint sealing for Lyndhurst homes and businesses

What happens if it’s left?

Waiting until the next redecoration can mean a winter of draughts and dirt in the gaps. Sealing them now is a short job in most rooms. Around Lyndhurst, water from a failed joint in an older home can soak into timber and plaster, and that’s a much bigger job than renewing the sealant.

The cost depends on the size of the job, how much old material has to come out and access to the work. We give a clear quote before we start.

Why choose Mr Mastic in Lyndhurst

  • Experience in homes, commercial sites and hotels
  • Approved under the ARBOMaster scheme
  • 4.9 on Google from 180+ five-star reviews
  • Colour agreed with you before work begins

See our cost guide or our reviews.

Floor joint sealing in Lyndhurst, done properly

Thresholds are where two floors, or a floor and a door, meet. We seal them with a flexible sealant suited to the floor finishes either side so the joint stays neat. We work on tiled floors, thresholds and skirting boards, and common reasons people get in touch are perimeter joints in tiled floors filled with grout and open gaps along the bottom of skirting boards.

Homes around Lyndhurst range from older cottages to newer houses, and their floors range just as widely, from timber that moves with the seasons to tiles laid on concrete. The sealant at skirtings and thresholds has to suit the floor it meets.

Big or small, it’s backed by our one-year guarantee in Lyndhurst and across Hampshire.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Lyndhurst (SO43)
Region
Hampshire
Cover
One year on every job
Quote
A clear price before work begins
Phone
0345 464 0079
Last updated
26 October 2026

What the job involves on each surface

Tiled floors

Perimeter joints in tiled floors should be sealant, not grout. We rake out any grout there and reseal.

Thresholds

Threshold joints get a lot of feet, so we choose a hard-wearing, flexible product.

FAQs for Lyndhurst

Do you cover smaller places like Lyndhurst?

Yes, smaller places are covered as well as towns. We work across London and the South East. Let us know about access, parking and anything unusual about getting there when you book.

Do you cover Lyndhurst for floor joint sealing?

Yes. We work across London and the South East, and Lyndhurst is part of that. You can phone 0345 464 0079 or drop us an email and let us know what needs doing, and we’ll send you a clear quote.

Should I try DIY first?

Sometimes. The key is preparation: remove all the old material and work on a clean, dry joint. We can always put it right if it fails.

Where do you work from?

Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.

Can tenants book the work?

Yes, though it’s best to check with your landlord first. Many landlords are glad to have it sorted.

Does someone need to be in?

It depends on the job. Inside work needs someone to give us access, while outside work can sometimes be arranged differently.

Are you ARBOMaster approved?

Yes. We hold ARBOMaster approved applicator status and we’re fully insured too.

Do you seal floor joints in bathrooms and kitchens?

Yes. These joints get wet every time the floor is cleaned, so we seal them with silicone suited to wet areas.

How we quote for floor joint sealing

For a quick quote, just ask. What matters most is:

  • Whether the work is at height
  • The type of sealant required
  • Any mould that needs treating
  • How many areas need sealing

Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.

Asking for a quote

To help us quote quickly, please include:

  • The type of property
  • Pictures of the joints, sent by email
  • The problem you’ve noticed
  • Whether it has been sealed before

Every job is quoted individually, so the first step is telling us about yours. Just phone 0345 464 0079 or send us an email with the details and send pictures if you have them.

Honest limits

Before you book, it’s worth knowing the limits too:

  • Bouncy or failing floorboards
  • Leaks from a failed tanking system
  • Loose, hollow or cracked tiles, which need a tiler

If in doubt, phone 0345 464 0079 or drop us an email and we’ll say what we think before you book.

Surfaces we seal

  • Commercial floors
  • Thresholds
  • Wet room & bathroom floors
  • Concrete floor joints
  • Tiled floors
  • Skirting boards

Can I do it myself?

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.

If you’ve already had a go yourself, that is fine. We cut it out and start again, so just mention it when you contact us.

The process

We work through the job in order: protect, prepare, seal, tidy. Typically it takes a few hours for most rooms, longer for large commercial floors. For a job in Lyndhurst, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.

  1. We start by checking the floor, the joint and what traffic it takes.
  2. We remove what’s in the joint now.
  3. We vacuum out the joint and add backing where the depth needs setting.
  4. We apply the sealant in a colour that suits the floor.
  5. The joint is tooled neatly and the cure time explained.

How to prepare

  • Mention any parking rules near the property
  • For business premises, tell us about site rules or sign-in
  • Mention any leaks or damp you’ve noticed

Ask for a quote

To get a quote, phone 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You will have a clear quote before any work starts.

Ask for a quote

Read more

What floor joint sealing looks like in Lyndhurst

Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. That is why the skirting and threshold joints need a flexible seal.

If you let a flat or house near Ashurst New Forest station, gaps at skirtings and thresholds are worth sealing between tenancies. If you look after a church, hall or community building such as Church of Our Lady and St Edward, joints in its floors, skirtings and thresholds need resealing as they wear.

Lyndhurst is about 4 miles south-west of Totton, in Hampshire. Homes, rented property, offices and hotels in Lyndhurst is covered for floor joint sealing. Every job comes with our one-year guarantee. Lyndhurst is one of 683 places in Hampshire where we work for floor joint sealing. We also work in Southampton, around 9 miles away.

Our applicators cover all of SO43 for floor joint sealing. Local streets include High Street, King's Close and Empress Road, all of which we cover. We also cover Emery Down (1 mile west), Ashurst (3 miles north-east), Balmerlawn (3 miles south), Colbury (4 miles north-east) and Brockenhurst (4 miles south). Further out, we also cover Eastleigh (12 miles north-east), Totton (4 miles north-east), Chandler's Ford (11 miles north-east), Hedge End (12 miles east), Lymington (8 miles south) and Romsey (9 miles north-east).

What’s near Lyndhurst

Typical jobs here are in homes near Fox And Hounds Public House, among other places. Lyndhurst’s nearest station is Ashurst New Forest station, about 2.4 miles north-east. Nearby you’ll also find Ashurst Hospital (2.6 miles north-east) and National Dairy Museum (3.4 miles north-east). The countryside around Lyndhurst includes Copythorne Common.

Map of Lyndhurst © OpenStreetMap contributors

What we’re called out for in Lyndhurst

Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away.

It’s worth asking for a quote if you see:

  • Caulk that has cracked where the floor moves
  • Open joints around bathroom floor edges
  • Tiled floors with no room to move
  • Worn sealant at door thresholds

Managing a site like St Michael and All Angels CofE Infant School? Then entrance and corridor floor joints take a lot of traffic.

Before booking anyone

  • Whether they seal over old material or remove it
  • Whether VAT is included
  • What happens if they find a problem under the old sealant
  • How the joint is cleaned and prepared

Choosing a sealant specialist

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job