Hampshire · England

Floor & skirting joints in Hill Head, Hampshire

Professional floor joint sealing in and around Hill Head, with old sealant always removed completely and a 12-month guarantee.

  • Floor edges that trap water and grime
  • Chipped and open joints in warehouse floors
  • Cracked grout where a tiled floor needs a movement joint

Floor joint sealing in Hill Head

Floor joint sealing in Hill Head, done properly

Good floor joints come down to the right product and clean, prepared edges. Old caulk, grout or failed sealant comes out first, the joint is cleaned and backed where needed, then the new sealant goes in. Common call-outs are for gaps opening between the floor and skirting and gaps between floors and kitchen plinths, on skirting boards, concrete floor joints and wet room & bathroom floors.

Around Hill Head, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.

A 12-month guarantee comes with the work, just as it does everywhere we cover.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Location
Hill Head (PO14)
Wider area
Hampshire
Guarantee
A year, on every job
Quotes
A clear quote up front
Phone
0345 464 0079
Last updated
26 October 2026

For landlords and businesses

If you manage several properties in or around Hill Head, several properties can go on one quote. Send us the addresses and the work at each.

From a single let to a portfolio, you get the same standard of work: old sealant fully removed, joints prepared properly and a one-year guarantee.

How the job changes by surface

Commercial floors

Washroom and kitchen floors in commercial buildings need sound edge joints. They’re resealed with a flexible, water-resistant sealant.

Concrete floor joints

Old filler, dust and debris are cleaned out of the joint, vacuuming them clean. We fit backing where needed.

Quotes for floor joint sealing in Hill Head

The price is agreed before any work begins. It takes into account:

  • How many rooms, windows or areas are involved
  • Access and height
  • Mould in or behind the old joints
  • How much old sealant there is and how hard it is to remove

The cost reflects the work involved, not a rough estimate. That is why we ask a few questions first and give you a clear price before we start.

What we need to know

A few details help us give you an accurate quote. When you ask for a quote, tell us:

  • The type of property
  • Whether it has been sealed before
  • The address or postcode of the job
  • What’s wrong with the joints now

To get a quote, call 0345 464 0079 or email us and tell us where the job is and what the problem looks like. You will have a clear quote before we start.

Should I try it myself first?

Some sealant jobs are within reach of a careful DIYer, such as a straightforward joint indoors. The common mistakes are sealing over old sealant, sealing a damp joint and using far too much.

Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs call for the right materials, safe access and experience.

Joints and finishes in Hill Head homes

Floors around Hampshire run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.

Community buildings like Holy Rood Church are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear. Rented homes near Fareham station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies.

Hill Head is about 3 miles south-west of Fareham, in Hampshire. Hill Head gets the same service as everywhere we cover: old sealant removed completely, careful preparation and a 12-month guarantee. Our area takes in 683 places across Hampshire, large and small. Portsmouth is on our list too, about 7 miles from Hill Head.

Here we cover the PO14 postcode area for floor joint sealing. We cover properties on Elsfred Road, Osborne View Road and Cottes Way and the roads around them. Nearby, we also carry out floor joint sealing in Stubbington (1 mile north-east), Little Posbrook (1 mile north-west), Titchfield (2 miles north), Catisfield (2 miles north) and Heathfield (2 miles north). We also work in nearby towns such as Gosport (4 miles east), Havant (11 miles east), Eastleigh (11 miles north-west), Fareham (3 miles north-east), Horndean (11 miles north-east) and Totton (14 miles north-west).

Local landmarks in Hill Head

Typical jobs here are in homes near Crofton School, Stubbington House School and The Osborne View pub, among other places. The closest station to Hill Head is Fareham station, roughly 2.9 miles north-east of the centre. Other landmarks nearby include Carron Row Farm Museum (2.8 miles north) and Fareham Shopping Centre (3.3 miles north-east). Green spaces nearby include West of the River Alver.

Map of Hill Head © OpenStreetMap contributors

Why act early in Hill Head

Filling a skirting gap with caulk looks fine at first, but the movement soon cracks it. A flexible sealant stretches instead, so the joint stays closed. Where a wall is exposed, as many are in small places like Hill Head, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.

Commercial jobs are quoted on the same basis as homes: how much there is to do, how we reach it and what it needs. Ask us for a quote and we will explain what it covers.

What you get with us

  • Rated 4.9 stars on Google
  • Approved under the ARBOMaster scheme
  • White, clear, grey or coloured to suit, where the product allows
  • More than 20 years in sealant work

Read what affects the cost and what customers say.

Hill Head questions

Do you cover Hill Head for floor joint sealing?

Yes, Hill Head is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or drop us an email with a few details of the job.

Is Hill Head within the area you cover?

Yes, Hill Head is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

How soon can the floor be mopped?

We give you a cure time for each joint. Feet are normally fine first, then mopping, then heavy wheels.

Can you match the sealant colour?

In most cases you can choose. We’ll tell you which colours the right product comes in and agree one before any work starts.

Do the sealants smell?

It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.

What do you need from me for a quote?

Let us know what needs doing and where, with photos by email if possible. We will ask anything else we need to know.

Do you hold any approvals?

Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.

Should I try DIY first?

Some simple jobs can be done by a careful DIYer. The usual mistakes are sealing over old sealant, sealing a damp joint and using too much.

When to call us in Hill Head

Concrete floor joints break down when traffic runs over open or failed joints. Pallet trucks and trolleys knock the edges away until the joint widens.

Common reasons people contact us are:

  • Gaps at thresholds between rooms
  • Open joints that fill with dirt
  • Cracked grout where a tiled floor needs a movement joint
  • Rigid edge joints in tiled floors

For site and facilities teams at buildings such as Crofton Hammond Infant School, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.

What to look for in a quote

  • What happens if the job turns out different
  • Who does the work, and how experienced they are
  • What guarantee comes with the work
  • Which colour the sealant will be

10 questions to ask before you book

How the visit works

Our applicators work methodically: protection first, then preparation, sealing and a tidy-up. Typically it takes a few hours for most rooms, longer for large commercial floors, and the area is left clean. Somewhere as small as Hill Head, access is often the only tricky part. If the job is outside, mention outbuildings, exposed walls and how to reach them.

  1. The room is cleared along the joints so we can reach them.
  2. We take out the cracked caulk, grout or old sealant.
  3. We clean and dry the edges of the joint.
  4. We apply a flexible sealant suited to the floor and tooled.
  5. Finally, we check the work and talk you through aftercare.

Getting ready for the visit

  • Mention any parking rules near the property
  • Tell us about access, such as stairs, a lift or high-level joints
  • Keep children and pets away from the work area

Ask for a quote

It all starts with a short chat. Describe the problem, the location and the size of the job. When it suits you, ring 0345 464 0079 or send us an email.

Get a quick quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job