Kent · England

Henhurst Floor Joint Sealing

Problem with your floor joints in Henhurst? We remove the old material, prepare the joints and seal them properly.

  • Worn sealant at door thresholds
  • Grout used at the floor edge instead of sealant
  • Failed joint filler in concrete floors

Floor joint sealing for Henhurst homes and businesses

How we handle floor joint sealing in Henhurst

Across Henhurst, we seal floor and skirting joints in homes and businesses. Each job starts with looking at the floor and the gap, because the right sealant depends on both. We work on commercial floors, concrete floor joints and wet room & bathroom floors, and people most often call us about grout cracking in a straight line across a floor and gaps between floors and kitchen plinths.

For a small place like Henhurst, the journey and access are planned in advance, and the work itself is the same as on any site.

Big or small, it’s backed by our one-year guarantee.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Where
Henhurst (DA12)
Region
Kent
Guarantee
A year, on every job
Price
Quoted before any work starts
Telephone
0345 464 0079
Last updated
26 October 2026

Can I do it myself?

The difference is mostly in the preparation and the product. Joints are cleaned back to sound surfaces and dried, and the sealant is chosen for how the joint moves and where it is, then guaranteed for a year.

The biggest DIY mistake is sealing over old sealant. New silicone won’t bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.

What we can’t put right

New sealant cannot fix everything, and we’d rather say so up front. It won’t solve:

  • Loose, hollow or cracked tiles, which need a tiler
  • Concrete repairs beyond the joint
  • Failed waterproofing under a wet room floor

Not sure which it is? You can ring 0345 464 0079 or drop us an email and we’ll tell you honestly.

What we seal

  • Commercial floors
  • Skirting boards
  • Concrete floor joints
  • Thresholds
  • Tiled floors
  • Wet room & bathroom floors

What we do, step by step

The work is kept neat and contained to the joints we’re treating, so you can get on with your day. The job usually takes a few hours, depending on the length of joint, and we explain the cure time before we leave. Somewhere as small as Henhurst, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. We start by checking the floor, the joint and what traffic it takes.
  2. Any old caulk, grout or sealant is raked or cut out.
  3. We vacuum out the joint and add backing where the depth needs setting.
  4. The chosen sealant goes in, coloured to suit the floor.
  5. We tool it neatly and tell you when it can be walked on and cleaned.

Getting ready for the visit

  • Let us know about stairs, lifts or work at height
  • Mention any sign-in or site rules at work premises
  • Mention any parking rules near the property

Ask for a quote

Every job is quoted individually. Just call 0345 464 0079 or send us an email with the details and send photos if you have them.

Get a price

Advice

Your questions about floor joint sealing in Henhurst

Is Henhurst within the area you cover?

Yes, Henhurst is covered. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.

Is Henhurst in your area for floor joint sealing?

Yes, Henhurst is within the area we cover. Our work covers London and the South East. Just phone 0345 464 0079 or email us with a few details of the job, and we’ll give you a clear quote.

Do you have insurance?

Yes, we are fully insured.

Do you hold any approvals?

Yes. Mr Mastic is an ARBOMaster approved applicator and we are fully insured too.

Do you remove the old sealant?

Yes. We cut out all the old sealant and clean the joint before applying anything new.

Why has a gap opened under my skirting?

Floors and walls move a little with the seasons, and new floors settle. A flexible sealant closes the gap without cracking like caulk.

My floor grout keeps cracking in a line. Can you help?

In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant coloured to suit. Loose or cracked tiles need a tiler first.

Do you seal floor joints in bathrooms and kitchens?

Yes. Floor edges in bathrooms and kitchens get wet at every clean, so a flexible silicone is the right choice.

What affects the quote in Henhurst

You will get a clear quote before any work starts. It takes into account:

  • The amount of work
  • Whether the work is at height
  • Working hours on commercial sites
  • The type of sealant required

The cost reflects the work involved, not guesswork. That is why we ask a few questions first and send you a clear quote before work begins.

What to tell us for a quote

To help us quote quickly, let us know:

  • How many joints, rooms or windows are involved
  • Pictures of the joints, sent by email
  • Whether it’s a home or a business
  • Access, such as stairs, a lift or height

To get a quote, ring 0345 464 0079 or drop us an email with the location and a short description of the problem. We’ll send you a clear quote before any work starts.

Landlords, agents and businesses in Henhurst

Letting agents often deal with us directly. Tell us the address, the job and how access works and we’ll give you a quote.

Businesses can book us for washrooms, kitchens, offices and more. For commercial premises, we can talk through working times when we quote.

Floor joint sealing around Henhurst

Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That’s why the skirting and threshold joints need a flexible seal.

Community buildings like Church of St Margaret are part of the picture too: floor and skirting joints in halls and kitchens wear like any others. Managing a site like Singlewell Primary School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early.

Henhurst is about 2 miles south of Gravesend, in Kent. For floor joint sealing in and around Henhurst, it’s easy to get a quote: please phone 0345 464 0079 or send us an email. We cover Kent from our Crawley base. Our Kent coverage runs to 922 places, and Henhurst is one of them. We also work in London, about 22 miles from Henhurst.

Postcode districts we cover here for floor joint sealing: DA12. If you are just outside Henhurst, we cover Singlewell or Ifield (1 mile north-west), Istead Rise (1 mile west), Gravesend (2 miles north), Denton (2 miles north) and Northfleet Green (2 miles north-west). Larger places within reach include Maidstone (11 miles south-east), Dartford (8 miles west), Sevenoaks (12 miles south-west), Tonbridge (15 miles south), Northfleet (3 miles north-west) and Swanley (9 miles west).

Near you in Henhurst

In Henhurst, that means homes and buildings near Jeskyns, The George Inn and Thamesview School. The closest station to Henhurst is Sole Street station, roughly 1.3 miles south. Nearby you will also find Gravesham Museum (2.8 miles north) and Gravesham Community Hospital (3 miles north). Open spaces near Henhurst include Sawyers Lake and Gad's Hill.

Map of Henhurst © OpenStreetMap contributors

What we are called out for in Henhurst

An open floor joint fills with dirt and water. In wet areas, water runs into the gap at every clean and behind skirting and plinths.

Look out for these signs:

  • Open joints around bathroom floor edges
  • Failed joint filler in concrete floors
  • Caulk that has cracked where the floor moves
  • Tiled floors with no room to move

If you let a flat or house near Sole Street station, gaps at skirtings and thresholds are worth sealing between tenancies.

What to look for in a quote

  • What the cure time is
  • How hidden problems are handled
  • Who turns up on the day
  • Whether VAT is included

10 questions to ask before you book

Keeping the joints in good condition

Once the sealant has cured, a few habits help it last:

  • Walk round the room once a year and look at the edges
  • Have a cracking tiled floor checked before tiles break
  • Use furniture pads near skirting
  • Ask before painting over a sealed joint

Keep heavy furniture from dragging across the joints. Sharp edges can cut the sealant before it has fully cured.

Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen over time.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job