Kent · England
Floor Joint Sealing in Hareplain
Floor joint sealing for Hareplain and the surrounding area: the right sealant, proper preparation and a neat finish. Ask us for a quick quote.
- Chipped and open joints in warehouse floors
- Gaps between floors and kitchen plinths
- Worn sealant at door thresholds
When it is not the sealant
Before you book, it’s worth knowing the limits:
- Damaged concrete that needs breaking out and repairing
- Structural movement or subsidence
- Subfloor problems that need a flooring contractor
If in doubt, call 0345 464 0079 or email us and we will say what we think.
Where we work in Hareplain
- Concrete floor joints
- Skirting boards
- Wet room & bathroom floors
- Thresholds
- Tiled floors
- Commercial floors
Floor joint sealing in Hareplain
Where skirting is painted, we can use a flexible sealant that takes paint. For bathrooms and kitchens, silicone is normally the better choice because it handles water. If you have rigid edge joints in tiled floors and cracked grout where a tiled floor needs a movement joint, we can put it right, on commercial floors, skirting boards and thresholds alike.
For a small place like Hareplain, the journey and access are planned in advance, and once on site, the job is the same as anywhere.
All of our work is guaranteed for twelve months, in Hareplain and everywhere else we cover.
- Location
- Hareplain (TN27)
- Region
- Kent
- Cover
- A year, on every job
- Quotes
- A clear price before any work starts
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
Landlord and commercial work in Hareplain
Whether it’s one flat or a portfolio, you get the same standard of work: the old material taken out, careful preparation and a 12-month guarantee.
We also work for property managers and facilities teams in Hareplain and across Kent. We can quote a run of properties together, and we’re fully insured for the work.
Places near Hareplain
What else we do in Hareplain
Your questions about floor joint sealing in Hareplain
Do you work for landlords with property near Headcorn station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. Just call 0345 464 0079 or email us with the address and what needs doing, and we’ll give you a clear price.
Do you cover smaller places like Hareplain?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. The journey is planned ahead, so it helps to know about access.
Are you an approved applicator?
Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.
Do you offer different sealant colours?
In most cases you can choose. We’ll tell you which colours the right product comes in.
Do you seal warehouse floor joints?
Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Tell us what runs over the floor and we’ll quote.
Can new sealant go over the old?
No, it will not last. It can look neat for a few weeks, but the new layer lifts away from the old one. The old sealant has to come out completely.
When can I walk on the floor?
It depends on the product and the conditions. Before we leave, we tell you when it can be walked on, mopped and driven over.
How long does floor joint sealing take?
It depends on the size of the job, but as a guide it takes a few hours for most rooms, longer for large commercial floors. We will tell you when we quote.
Can I do it myself?
Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
If you’ve already had a go yourself, that’s fine. We cut it out and start again, so just mention it when you contact us.
How to look after the new joints
A little care helps the new joints last. We recommend:
- Use furniture pads near skirting
- Keep heavy wheels off new concrete joints until cured
- Keep caulk for dry, still joints only
- Get cracks along tile grout lines looked at early
Lift furniture rather than sliding it over sealed joints. Sharp edges can cut the sealant before it has fully cured.
Water getting into floor joints in bathrooms and kitchens can damage what’s underneath. A sound seal stops that happening.
What we do, step by step
You do not need to clear the whole room or building before we come, just the space around the work. Everything nearby is protected, and the job takes a few hours, depending on the length of joint in most cases. Somewhere like Hareplain needs a little journey planning: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
How to prepare
- Keep pets and children clear of the area while we work
- Where the joints are inside, avoid wetting them before we arrive
- Move anything stored near the joints
Ask for a quote
We quote each job on its own. Just phone 0345 464 0079 or email us with the details and send photos if you have them.
Read more
Leave it or put it right?
Left open, concrete joints break down under traffic. A sealed joint supports the edges and keeps the damage down. Older cottages and farmhouses around Hareplain can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
The cost reflects the work involved, not guesswork. That is why we ask a few questions first.
What you get with us
- Sanitary silicone with an anti-fungal additive in wet areas
- A 12-month guarantee on all work
- We never seal over old sealant
- Sealant colour chosen to suit
Common problems we fix in Hareplain
An open floor joint fills with dirt and water. In kitchens and bathrooms, mop water gets into the gap and behind skirting and plinths.
The most common problems we see are:
- Perimeter joints in tiled floors filled with grout
- Floor edges that trap water and grime
- Cracked grout where a tiled floor needs a movement joint
- Failed joint filler in concrete floors
Rented homes near Headcorn station change hands often, and open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Before booking anyone
- Which sealant they’ll use, and why
- Who does the work, and how experienced they are
- How the joint is cleaned and prepared
- What guarantee comes with the work
New homes and floors in Hareplain
Across Kent, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
Around Hareplain, as everywhere, floor joint sealing is only as good as the preparation behind it.
Hareplain is about 10 miles south of Maidstone, in Kent. We provide floor joint sealing to homeowners, landlords and businesses in Hareplain and nearby, as part of our work across Kent. Hareplain is one of 922 towns and villages in Kent where we work for floor joint sealing. You can also see our page for Crawley, about 35 miles away.
All of TN27 is within our area for floor joint sealing, from the main roads to the quietest streets. If you are just outside Hareplain, we cover Three Chimneys (1 mile south-west), Biddenden (1 mile south-east), Curteis' Corner (1 mile east), Lashenden (2 miles north-east) and Standen (2 miles east). We also work in nearby towns such as Maidstone (10 miles north), Ashford (11 miles east), Royal Tunbridge Wells (15 miles west), Tonbridge (15 miles west), Kings Hill (14 miles north-west) and Foley Park (11 miles north).
Around Hareplain
Locally, jobs take us to homes and businesses close to Three Chimneys Public House. The nearest railway station is Headcorn station, roughly 2.8 miles north of the centre. Other landmarks nearby include Kent Firefighting Museum (0.8 miles north) and Sissinghurst Castle (1.7 miles south-west).