Kent · England
Floor Joint Sealing in Hamstreet
Our applicators work in Hamstreet on sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old material cut out, joints cleaned and sealed neatly and every job guaranteed for a year.
- Gaps opening between the floor and skirting
- Worn sealant at door thresholds
- Floor edges that trap water and grime
Floor joint sealing in Hamstreet, done properly
A threshold joint has to cope with feet, movement and sometimes water. We seal them with a flexible sealant suited to the floor finishes either side so the joint stays neat. We work on commercial floors, concrete floor joints and wet room & bathroom floors, and common reasons people get in touch are dirt and water collecting in open floor joints and threshold joints that have opened or worn.
Around Hamstreet, older homes often have timber floors that move through the year, which is why skirting and threshold joints need a flexible sealant, not filler.
All of our work is guaranteed for twelve months, in Hamstreet and everywhere else we cover.
- Location
- Hamstreet (TN26)
- Region
- Kent
- Cover
- One year on every job
- Price
- Quoted before any work starts
- Call
- 0345 464 0079
- Updated
- 26 October 2026
New homes and floors in Hamstreet
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Letting a property close to Ham Street station? Then gaps at skirtings and thresholds are worth sealing between tenancies. For buildings such as Church of the Good Shepherd, joints in its floors, skirtings and thresholds need resealing as they wear. For site and facilities teams at buildings such as Hamstreet Primary Academy, floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Hamstreet is about 5 miles south of Ashford, in Kent. Our applicators cover floor joint sealing for homes and businesses in Hamstreet and nearby, as part of our work across Kent. Our area takes in 922 places across Kent, large and small. Our Crawley page covers work nearby (45 miles or so).
Our applicators cover all of TN26 for floor joint sealing and the streets around it. If you need floor joint sealing at a property on The Street, Dukes Meadow and Rectory Walk or a nearby road, we can help. Other places close to Hamstreet include Orlestone (1 mile north-west), Ruckinge (1 mile east), Kenardington (2 miles west), Bromley Green (2 miles north) and Stone Cross (2 miles north-east). We also work in nearby towns such as Ashford (5 miles north), Folkestone (14 miles east), Hythe (10 miles east), Hawkinge (14 miles east), Tenterden (7 miles west) and Cheriton (13 miles east).
Landmarks near Hamstreet
We work in homes and buildings around The Dukes Head pub. There’s a railway station in Hamstreet itself: Ham Street station. Other landmarks nearby include Brenzett Aeronautical Museum (3.9 miles south) and William Harvey Hospital (5.8 miles north-east). For a walk, there’s Orlestone Forest.
How it works
A visit follows a simple pattern: we check the joints, mask and protect the surrounding surfaces, do the work and tidy away. Most jobs take a few hours, depending on the length of joint. For a village or hamlet like Hamstreet, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. We bring what the job needs, so it can be finished in one trip where possible.
- We look at the gap and the floor type and agree the right sealant.
- We take out any old caulk, sealant or grout along the line.
- The joint is vacuumed clean, with backing fitted wherever depth matters.
- A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
- The joint is tooled to a neat finish and we tell you when it can take feet and a mop.
Getting ready for the visit
- Let us know about parking restrictions
- Let us know if you’ve seen damp or leaks
- Mention if the joints have been sealed before
Getting a quote
Getting a quote is simple: let us know the job and the location. Photos by email help us understand the job, and we’ll take it from there.
Advice
Places near Hamstreet
Also in Hamstreet
DIY sealant or a professional job?
Too much sealant is as bad as too little. A thick, smeared bead looks untidy and doesn’t move well, and the joint depth matters as much as the finish.
A DIY attempt does not rule out a professional job. We remove it and do the joint properly, so just mention it when you contact us.
Keeping the joints in good condition
Once the sealant has cured, a few habits help it last:
- Ask before painting over a sealed joint
- Cone off fresh joints until they’re ready
- Check skirting joints after the heating season
- Don’t fill floor joints with caulk where they move or get wet
Mop with a well-wrung mop rather than flooding the floor. Keeping the edges drier helps the sealant last longer.
In wet areas, an open floor joint lets water reach the subfloor. A sound seal stops that happening.
Questions from Hamstreet
Can you help a landlord with a rental near Ham Street station?
Yes, we work for letting agents and landlords. Just call 0345 464 0079 or send us an email and tell us about the property, and we will send you a clear quote.
Do you cover Hamstreet for floor joint sealing?
Yes. We work across London and the South East, and Hamstreet is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
Do you work on commercial floors?
Yes. We reseal concrete floor joints in commercial and industrial units. We will talk through the traffic and choose a sealant suited to it.
Where are you based?
We are a Crawley-based firm. Our area covers South East England, London and Scotland.
Can grout be replaced with sealant on a tiled floor?
Often, yes, at the edges and along suitable lines. The grout is raked out and replaced with a flexible sealant in a colour to suit, giving the floor room to move.
Do you guarantee your work?
Yes. There’s a 12-month guarantee on every job.
How soon can the floor be mopped?
We’ll tell you before we leave. That depends on the product, and walking on it normally comes before mopping or wheeled traffic.
What sealant do you use?
It depends on the joint: sanitary silicone where it gets wet, and sealants suited to movement or weather elsewhere. Brands we use include Arbo and Everbuild.
When something else is needed
Honest advice matters more to us than a booking, so here’s what sealant cannot fix:
- Leaks from a failed tanking system
- Loose, hollow or cracked tiles, which need a tiler
- Movement too big for a sealant joint
If you’re not sure, just phone 0345 464 0079 or email us and we’ll give you a straight answer before booking.
Where we work in Hamstreet
- Wet room & bathroom floors
- Commercial floors
- Thresholds
- Concrete floor joints
- Tiled floors
- Skirting boards
What the job involves on each surface
Skirting boards
Skirting-to-floor joints are a regular job for us. We take out any cracked caulk before sealing so the bead sits on a clean surface.
Wet room and bathroom floors
Mop water gets into any open joint at the edge of a bathroom floor. A flexible seal stops water running into the gap.
Leave it or put it right?
An open concrete floor joint gets wider every time something heavy crosses it. A sealed joint supports the edges and keeps the damage down. Older cottages and farmhouses around Hamstreet can have timber floors and frames, where water from a failed joint can cause rot if it’s left.
A few things move the cost up or down: the old material and how easily it comes out, whether mould needs treating, and whether we need extra access for height. We take all of that into account in your quote.
Why us?
- Colour picked to suit the job
- Over 20 years’ experience
- White, clear, grey or another colour, product permitting
- Experience in homes, commercial sites and hotels
Read how sealant jobs are priced and customer reviews.
Quotes for floor joint sealing in Hamstreet
The quote reflects the job in front of us. We take into account:
- Which sealant suits the joint
- Any working-time requirements on site
- The number of rooms or windows
- How much old sealant there is and how hard it is to remove
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
Asking for a quote
There’s no need for technical detail. It helps if you can tell us:
- Pictures of the joints, sent by email
- The type of property
- Where the property is
- Whether it has been sealed before
For a quick quote, get us on the phone, or send an email if you’d rather. Describe what needs sealing and we will explain what’s involved before giving you a price.