West Sussex · England
Floor & skirting joints in Furnace Wood, West Sussex
Floor joint sealing in Furnace Wood from a team with over 20 years’ experience. Rated 4.9 on Google from 180+ five-star reviews.
- Grout used at the floor edge instead of sealant
- Failed seals where bathroom floors meet baths and panels
- Threshold joints that have opened or worn
Common problems we fix in Furnace Wood
Floors and walls move a little with the seasons. Heating dries timber and opens gaps along the skirting, then close again in damper months.
Signs it’s time to call us include:
- Cracked caulk along skirting in bathrooms and kitchens
- Concrete floor joints that have broken down
- Floor edges that trap water and grime
- Grout used at the floor edge instead of sealant
Schools such as Felbridge Primary School are buildings too, and floor joints in corridors, halls and entrances take heavy wear and need resealing before the edges break up.
Comparing quotes
- Is VAT in the price?
- How much experience the applicator has
- How the surfaces are prepared before sealing
- Whether they’re fully insured
About our floor joint sealing in Furnace Wood
Where skirting is painted, we can use a flexible sealant that takes paint. In wet areas we’d normally use silicone. If you have grout used at the floor edge instead of sealant and concrete floor joints that have broken down, we can help, whatever the surface.
In a village or hamlet like Furnace Wood, new homes are more likely to be a barn conversion or a handful of houses than a big estate. Each still needs its sealant and floor joints finished properly.
All of our work is guaranteed for twelve months.
- Place
- Furnace Wood (RH19)
- Wider area
- West Sussex
- Guarantee
- One year on every job
- Quotes
- A clear quote up front
- Phone
- 0345 464 0079
- Last updated
- 26 October 2026
What floor joint sealing looks like in Furnace Wood
Across West Sussex, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
If you let a flat or house near East Grinstead station, open skirting and floor joints collect dirt and water, so seal them while the property is empty.
Furnace Wood is about 3 miles west of East Grinstead, in West Sussex. Every kind of property in Furnace Wood can book us for floor joint sealing, old or new, large or small. The work is guaranteed for a year. Furnace Wood is one of 371 towns and villages in West Sussex where we work. We also work in Crawley, around 6 miles away.
Jobs for floor joint sealing in RH19 is quoted and booked the same way as anywhere else. Floor joint sealing is available to properties on Lake View Road, Felcot Road and Furnace Farm Road. If you’re just outside Furnace Wood, we cover Domewood (1 mile north-west), Snow Hill (1 mile west), Felbridge (1 mile east), Crawley Down (1 mile south) and Newchapel (2 miles north-east). We also work in nearby towns such as Crawley (6 miles west), Horsham (12 miles south-west), Haywards Heath (10 miles south), Burgess Hill (13 miles south), East Grinstead (3 miles east) and Broadfield (7 miles south-west).
Local landmarks in Furnace Wood
In Furnace Wood, that means homes and buildings near Imberhorne School. The closest station to Furnace Wood is East Grinstead station, roughly 2.5 miles south-east of the centre. Nearby you will also find Effingham Park Motor Museum (0.9 miles west) and Queen Victoria Hospital (3.1 miles east). Open spaces near Furnace Wood include Hedgecourt Lake.
FAQs for Furnace Wood
Do you work for landlords with property near East Grinstead station?
Yes, landlords and agents are among the people we work for, and several properties can be quoted together. You can phone 0345 464 0079 or drop us an email with the details for a clear quote.
Do you cover smaller places like Furnace Wood?
Yes. Furnace Wood is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Let us know about access, parking and anything unusual about getting there when you book.
Can you match the sealant colour?
Yes. Sealants come in white, clear, grey and other colours for many products, and we agree the colour with you before any work starts.
Where is Mr Mastic based?
Our base is Crawley, with over 20 years’ experience. We work across South East England, London and Scotland.
Do you remove the old sealant?
Yes. Sealing over the old bead is the commonest cause of early failure, and it’s something we never do.
Is it OK to seal over old sealant?
No. New silicone will not bond to old silicone, and it traps any mould or water underneath. It all has to come out first.
How long before the joint can take traffic?
That varies with the sealant and the room. Before we leave, we tell you when it can be walked on, mopped and driven over.
Why does the gap under my skirting keep coming back?
Normally it’s movement: heating drying the timber, or a filler that is too rigid. A flexible sealant stays closed as the floor moves.
Aftercare tips
So the new joints stay in good condition:
- Keep floor cleaning water to a minimum at the edges
- Walk round the room once a year and look at the edges
- Check the sealant is paintable before decorating
- Sweep along the edges of the floor
Keep off the joint for the time we give you. Feet are generally fine before mopping or wheeled traffic, and we’ll tell you both.
Sealing a gap while it’s small is a quick job. Left alone, they collect dirt and widen over time.
Surface by surface
Concrete floor joints
Concrete floors have sawn or formed joints to control cracking. They’re resealed with a product chosen for what runs over them.
Commercial floors
Commercial washrooms and kitchens have floor joints that get wet constantly. They’re resealed with a flexible, water-resistant sealant.
Towns and villages near Furnace Wood
Other services in Furnace Wood
What affects the cost of floor joint sealing
The price is agreed before any work begins. It takes into account:
- How easy the joints are to reach
- How many areas need sealing
- Mould in or behind the old joints
- Which sealant suits the joint
Combining jobs into one visit is normally more efficient than separate visits. You will get one clear quote for the whole job.
What to tell us for a quote
Photos by email are helpful but not essential. Try to tell us:
- Where the property is
- Photos by email, if that’s easy
- The problem you’ve noticed
- If someone has resealed it before
Quotes start with a quick conversation. Tell us what’s wrong, where it is and how much there is, and we will talk you through what we’d do. When it suits you, call 0345 464 0079 or send us an email.
Honest limits
New sealant can’t fix everything, and we’d rather say so up front. Sealant will not put right:
- Failed waterproofing under a wet room floor
- A tiled floor that needs relaying
- Damaged concrete that needs breaking out and repairing
If you are not sure, just call 0345 464 0079 or email us and we’ll give you a straight answer.
Where we work in Furnace Wood
- Tiled floors
- Wet room & bathroom floors
- Skirting boards
- Commercial floors
- Concrete floor joints
- Thresholds
How the visit works
On the day, we look over the joints with you first. We protect the surfaces around the joints before any work begins. Most jobs take a few hours for most rooms, longer for large commercial floors. For a village or hamlet like Furnace Wood, the journey is planned in advance: tell us about narrow lanes, gates, long drives and where we can park. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the floor, the joint and what traffic it takes.
- We remove what’s in the joint now.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- We tool it neatly and tell you when it can be walked on and cleaned.
Before we arrive
- Tell us about access, such as stairs, a lift or high-level joints
- Mention any sign-in or site rules at work premises
- Keep pets and children clear of the area while we work
Get a quote
For a quick quote, get us on the phone, or email us if that’s easier. Describe what needs sealing and we will explain what’s involved before giving you a price.
Advice
DIY sealant or a professional job?
Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas need the right product, the right access and the right method.
Sealing over old silicone is the commonest DIY error. New silicone won’t bond to old, so it peels away and traps moisture behind it. All the old material has to come out first.