Kent · England
Detling Floor Joint Sealing
Problem with your floor joints in Detling? We remove the old material, prepare the joints and seal them properly.
- Cracked grout where a tiled floor needs a movement joint
- Skirting caulk that keeps splitting
- Concrete floor joints that have broken down
Joints and finishes in Detling homes
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and they do not all move the same way. The joint at the skirting or threshold has to allow for that.
For site and facilities teams at buildings such as Valley Park School, entrance and corridor floor joints take a lot of traffic. If you look after a church, hall or community building such as St Martin of Tours Church, floor and skirting joints in halls and kitchens wear like any others.
Detling is about 3 miles north-east of Maidstone, in Kent. Anywhere in ME14, we cover floor joint sealing for homes and businesses. Our area takes in 922 places across Kent, large and small. There’s also a page for Chelmsford, roughly 31 miles from Detling.
Work in ME14 works the same way as everywhere else we cover. Whether your property is on The Street, Princes Way and Queens Way or anywhere close by, our applicators can take on the job. Nearby, we also carry out floor joint sealing in Thurnham (1 mile south-east), Grove Green (1 mile south-west), Harbourland (1 mile west), Weavering (2 miles south) and Bearsted (2 miles south). Within a short drive, we also cover Maidstone (3 miles south-west), Sittingbourne (8 miles north-east), Gravesend (12 miles north-west), Tonbridge (14 miles south-west), Faversham (14 miles east) and Northfleet (14 miles north-west).
What’s near Detling
Typical jobs here are in homes near The Larches and The Cock Horse pub, among other places. For rail, the closest station is Bearsted station, about 1.4 miles south of the centre. A little further out are KIMS hospital (0.8 miles south-west) and The Mall Maidstone (2.4 miles south-west). For a walk, there’s Burham Down and Detling Hill.
Floor joint sealing in Detling, done properly
We seal floor joints in homes, offices and commercial buildings across Detling. We start by checking the floor type and the joint, since that decides which sealant suits. We’re often asked to deal with perimeter joints in tiled floors filled with grout and cracked grout where a tiled floor needs a movement joint, across skirting boards, thresholds and concrete floor joints.
Older homes in small places like Detling often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is guaranteed for twelve months. If something isn’t right with it in that time, tell us and we’ll put it right.
- Where
- Detling (ME14)
- Region
- Kent
- Cover
- One year on every job
- Quote
- Quoted before any work starts
- Phone
- 0345 464 0079
- Page updated
- 26 October 2026
DIY sealant or a professional job?
Sealing over old silicone is the commonest DIY error. New silicone will not bond to old, so it lifts and traps water and mould underneath. All the old material has to come out first.
Some jobs are best left to a professional: high-level joints, fire-rated gaps, external movement joints and big jobs need the right product, the right access and the right method.
For landlords and businesses
Landlords and agents in Detling can book us as well as homeowners. Resealing between tenancies keeps a property looking cared for.
We regularly work with letting and managing agents. Tell us the address, the job and how access works and we’ll quote.
Nearby places to Detling
More services for Detling
When something else is needed
Before booking, it’s worth knowing the limits too:
- Structural movement or subsidence
- Loose, hollow or cracked tiles, which need a tiler
- Floors that are uneven or need levelling
If you are not sure, just phone 0345 464 0079 or drop us an email and we will give you a straight answer.
Where we work in Detling
- Skirting boards
- Wet room & bathroom floors
- Commercial floors
- Concrete floor joints
- Thresholds
- Tiled floors
Signs you need floor joint sealing in Detling
Wheels crossing an unfilled concrete joint chip its edges. Pallet trucks and trolleys knock the edges away.
Look out for these signs:
- Skirting caulk that keeps splitting
- Grout cracking in a straight line across a floor
- Rigid edge joints in tiled floors
- Open gaps along the bottom of skirting boards
If you let a flat or house near Bearsted station, gaps at skirtings and thresholds are worth sealing between tenancies.
What to look for in a quote
- What the cure time is
- Whether they seal over old material or remove it
- Whether VAT is included
- What insurance they hold
Detling: your questions answered
Can you do floor joint sealing in Detling?
Yes, Detling is within the area we cover. We work across London and the South East. Just ring 0345 464 0079 or send us an email with a few details of the job, and we’ll give you a clear price.
Is Detling within the area you cover?
Yes, we do. Our work covers London and the South East, and smaller places are part of that. Longer journeys are simply planned in advance.
Why does the gap under my skirting keep coming back?
Normally it’s movement: timber drying in winter, floors settling, or caulk that can’t stretch. A flexible sealant stays closed as the floor moves.
Does someone need to be in?
That depends on where the joints are. For work indoors, someone needs to let us in, while outside work can sometimes be arranged differently.
Can you seal where the floor meets the bath panel?
Yes. We cut out any old sealant or caulk and reseal with flexible silicone.
Will there be a smell?
Possibly a little. Any smell clears as the sealant cures.
Do you hold any approvals?
Yes. We are approved under the ARBOMaster scheme, the approved applicator scheme for Arbo sealants.
How do I get a quote for floor joint sealing in Detling?
Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or drop us an email with a short description of the job.
What happens if it’s left?
Leaving skirting gaps until the next decorating job lets dirt and draughts in. Sealing them now is a short job for most homes. Around Detling, older homes often have timber in their floors and frames, and water through a failed joint can rot timber if it’s left.
Doing several joints on one visit usually makes better use of the time than several visits, so tell us about everything that needs sealing. You will get one clear quote for the whole job.
Why us?
- Quality sealants from Arbo and Everbuild
- We are fully insured
- Experience in homes, commercial sites and hotels
- Colour picked to suit the job
Read our cost guide and our reviews.
Different surfaces, different methods
Skirting boards
Skirting-to-floor joints are a regular job for us. The old caulk is removed first.
Concrete floor joints
Old filler, dust and debris are cleaned out of the joint. Backing goes in where the depth needs controlling.
What happens on the day
You do not need to clear the whole room or building before we come, only the area right around the joints. Everything nearby is protected, and the work takes a morning or an afternoon for most homes for a typical job. For a village or hamlet like Detling, the journey is planned in advance: let us know about lanes, gates and parking. Everything for the job comes with us, so a second trip is avoided where possible.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- The joint is vacuumed clean and backing fitted where needed.
- The chosen sealant goes in, coloured to suit the floor.
- The joint is tooled neatly and the cure time explained.
How to prepare
- For indoor joints, keep the area dry beforehand if you can
- Let us know about parking restrictions
- Move anything stored near the joints
Ask for a quote
Asking for a quote is easy: let us know the job and the location, and roughly how big it is. A few photos by email make the job easier to understand, and we’ll take it from there.