Essex · England
Floor Joint Sealing in Chipping Ongar
We cover Chipping Ongar for sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints. Old sealant removed completely, joints prepared properly.
- Gaps opening between the floor and skirting
- Gaps at thresholds between rooms
- Rigid edge joints in tiled floors
How we handle floor joint sealing in Chipping Ongar
Where skirting is painted, we can use a flexible sealant that takes paint. In wet areas we’d normally use silicone. We are often asked to deal with failed joint filler in concrete floors and open gaps along the bottom of skirting boards, across thresholds, commercial floors and tiled floors.
Where new homes go up in smaller places like Chipping Ongar, it’s often a small development or a single plot. The sealant around baths, showers, frames and skirtings needs to be right from the start.
All of our work is guaranteed for twelve months, in Chipping Ongar and everywhere else we cover.
- Where
- Chipping Ongar (CM5)
- Region
- Essex
- Cover
- 12 months on all our work
- Price
- A clear quote up front
- Call
- 0345 464 0079
- Updated
- 26 October 2026
What sealant work cannot fix
We’ll always be straight with you, so here’s what sealant can’t fix:
- A tiled floor that needs relaying
- Concrete repairs beyond the joint
- Large cracks that need a surveyor
Not sure which it is? You can call 0345 464 0079 or drop us an email and we will tell you honestly before booking.
Where we work in Chipping Ongar
- Thresholds
- Wet room & bathroom floors
- Concrete floor joints
- Commercial floors
- Skirting boards
- Tiled floors
Nearby places to Chipping Ongar
Also in Chipping Ongar
Joints and finishes in Chipping Ongar homes
Floors around Essex run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. The joint at the skirting or threshold has to allow for that.
Schools such as Chipping Ongar Primary School are buildings too, and floor and threshold joints in busy corridors wear quickly and are best resealed early. If you look after a church, hall or community building such as United Reformed Church, joints in its floors, skirtings and thresholds need resealing as they wear.
Chipping Ongar is about 6 miles north-west of Brentwood, in Essex. From the centre of Chipping Ongar to the outskirts, floor joint sealing is available for homes and businesses alike. We cover 644 towns and villages across Essex, from the larger towns to small villages. Our Chelmsford page covers work nearby, about 11 miles away.
Every address in CM5 is within our area for floor joint sealing. Floor joint sealing is available to properties on High Street, Lavender Mews and Stanley Place and the roads around them. With the A128 close by, Chipping Ongar is simple for us to get to. We also cover Greensted (1 mile west), Shelley (1 mile north), High Ongar (1 mile east), Greensted Green (2 miles west) and Norton Mandeville (2 miles north-east). Larger places within reach include Chelmsford (11 miles east), Basildon (13 miles south-east), Harlow (7 miles north-west), Brentwood (6 miles south-east), Billericay (9 miles south-east) and Loughton (9 miles south-west).
Near you in Chipping Ongar
We work in homes and buildings around The Ongar Academy and The Royal Oak pub. Nearby you’ll also find Willingale Doe (4.5 miles north-east) and St. Margaret's Hospital (5.2 miles west). Not far away are Gernon Bushes.
Landlords, agents and businesses in Chipping Ongar
We also work for property managers and facilities teams. Several sites can be quoted together, and we are fully insured for the work.
From a single let to a portfolio, the work is the same standard: old sealant fully removed, joints prepared properly and a one-year guarantee.
How it works
When we get to you, we compare the joints with what we discussed. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours for most rooms, longer for large commercial floors. For a job in Chipping Ongar, we agree the time, the access and parking before the day. If the work is outside, the weather plays a part, as sealant needs a dry surface.
- The room is cleared along the joints so we can reach them.
- We take out the cracked caulk, grout or old sealant.
- We clean and dry the edges of the joint.
- We apply a flexible sealant suited to the floor.
- We check the joints and explain the aftercare.
Before we arrive
- Mention any parking rules near the property
- Plan for the work area to be out of bounds to pets and children
- On commercial sites, let us know about site rules
Getting a quote
To get a quote, ring 0345 464 0079 or drop us an email and tell us where the job is and what the problem looks like. You’ll have a clear quote before work begins.
Advice
Why it’s worth doing now in Chipping Ongar
Putting new grout into a crack that keeps reappearing doesn’t last. If the floor needs to move there, the grout will crack again. A flexible movement joint is the fix. Homes in smaller places like Chipping Ongar can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.
The cost depends on how much there is to do, how much old material has to come out and how easy the joints are to reach. You will have a clear quote before any work starts, so you know where you stand.
Why Chipping Ongar customers choose us
- 12-month guarantee on every job
- Arbo and Everbuild products
- Over 20 years’ experience
- We never seal over old sealant
See our cost guide and our reviews.
How we quote for floor joint sealing
We do not publish a price list, because no two jobs are the same. What we look at:
- Any mould that needs treating
- How many rooms, windows or areas are involved
- The product the joint needs
- Any working-time requirements on site
Instead of a standard rate, we look at what your job involves: how many joints, what’s in them now and how we reach them. You will know the price before we begin.
What to tell us for a quote
When you call or email, these details help:
- If someone has resealed it before
- The rough size of the job
- A few pictures by email, if you can
- What the problem is, such as mould, gaps, leaks or cracking
Asking for a quote is easy: tell us what needs doing and where. A few photos by email make the job easier to understand, and we will come back to you with a quote.
Chipping Ongar questions
Is there a guarantee on floor joint sealing in Chipping Ongar?
Every job comes with our 12-month guarantee, wherever it is. We’re also fully insured and ARBOMaster approved.
Do you cover smaller places like Chipping Ongar?
Yes. Chipping Ongar is within the area we cover, which takes in towns, villages and rural addresses. Our work covers London and the South East. Just mention lanes, gates or anything else about the route when you book.
Are you insured?
Yes. We are fully insured for domestic and commercial work.
How long does floor joint sealing take?
Most jobs take a few hours for most rooms, longer for large commercial floors. We will confirm how long when we quote.
How do I get a quote for floor joint sealing in Chipping Ongar?
The cost depends on the size of the job, access and how much old sealant has to come out. Ask us for a quote and we will talk you through it.
Are you ARBOMaster approved?
Yes. ARBOMaster is the approved applicator scheme for Arbo sealants, and we are part of it.
Can you add a movement joint to a tiled floor?
Often, yes, where it suits the floor. The grout is raked out and replaced with a flexible sealant in a colour to suit.
Why has a gap opened under my skirting?
It’s normally the floor moving: timber drying in winter, floors settling, or caulk that cannot stretch. A flexible bead keeps up with the movement.
How to look after the new joints
Aftercare is simple, and it makes a real difference:
- Check the sealant is paintable before decorating
- Vacuum floor joints regularly to stop grit building up
- Don’t slide heavy items over sealed joints
- Check skirting joints after the heating season
Mop with a well-wrung mop rather than flooding the floor. Less water at the edges helps the joints last.
Cracks along tile grout lines come back unless the movement is dealt with. Adding a movement joint early can stop cracks spreading to the tiles.
What the job involves on each surface
Thresholds
Two different floors meeting at a threshold move differently. We bridge them with a flexible bead.
Tiled floors
The edge of a tiled floor, where it meets the wall or skirting, should be a flexible joint. We rake out any grout there and reseal.