Kent · England
Floor & skirting joints in Brattle, Kent
Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints in Brattle, with a one-year guarantee on every job. Ask us for a quote.
- Gaps at thresholds between rooms
- Concrete floor joints that have broken down
- Dirt and water collecting in open floor joints
Floor joint sealing in Brattle
A threshold joint has to cope with feet, movement and sometimes water. We seal them with a flexible sealant suited to the floor finishes either side in a colour to suit. Typical jobs include gaps between floors and kitchen plinths and open joints that fill with dirt, across thresholds, commercial floors and skirting boards.
Older homes in small places like Brattle often have timber floors that move with the seasons, which is why skirting and threshold joints need a flexible sealant, not filler.
The work is covered for a year after we finish. If there’s a problem with it, please ring 0345 464 0079 or email us.
- Place
- Brattle (TN26)
- Wider area
- Kent
- Cover
- 12 months on all our work
- Price
- A clear price before any work starts
- Call
- 0345 464 0079
- Page updated
- 26 October 2026
What affects the cost of floor joint sealing
Jobs vary more than people expect. What affects the quote:
- The type of sealant required
- How easy the joints are to reach
- How much old sealant there is and how hard it is to remove
- Any working-time requirements on site
Leaving a failed joint generally makes the job bigger, not smaller. If you are unsure, call 0345 464 0079 or send us an email and we’ll give you an honest view and a quote.
What to tell us for a quote
Before you ask for a quote, have a think about:
- Where the property is
- The problem you’ve noticed
- If someone has resealed it before
- Roughly how big the job is
For floor joint sealing in Brattle, phone 0345 464 0079 or send us an email. A short description of the job and where it is helps us quote, and you will get a clear quote before work begins.
Do you need floor joint sealing in Brattle?
Timber floors and skirting shrink and swell through the year. In winter, with the heating on, timber dries and gaps open, then close again in damper months.
It’s worth asking for a quote if you see:
- Grout cracking in a straight line across a floor
- Worn sealant at door thresholds
- Dirt and water collecting in open floor joints
- Skirting that has pulled away from the floor
For site and facilities teams at buildings such as Woodchurch Church of England Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early.
Comparing quotes
- What preparation is included
- What insurance they hold
- How much experience the applicator has
- Which sealant they’ll use, and why
Surface by surface
Wet room and bathroom floors
In a wet room, the floor-to-wall joint is a key line of defence. We reseal it with a flexible silicone suited to wet areas, and we’ll tell you if the leak seems to come from elsewhere.
Commercial floors
Commercial floors take more traffic than most homes. We talk through the traffic and choose a sealant suited to it.
Questions from Brattle
Do you cover Brattle for floor joint sealing?
Yes. Our work covers London and the South East, and Brattle is part of that. You can phone 0345 464 0079 or drop us an email and tell us what needs doing.
Do you work for landlords with property near Appledore (Kent) station?
Yes, rental work is part of what we do. Just call 0345 464 0079 or drop us an email and tell us about the property, and we will give you a clear quote.
Can you use decorators’ caulk instead?
Caulk can’t cope with movement or water. Skirting joints move with the floor, so we use a flexible sealant that stretches.
Is there any odour?
It depends on the product. Some smell for a while, some hardly at all, and any smell fades as they cure.
How long does the job take?
That depends on how much there is to do, but most jobs take a few hours, depending on the length of joint. We’ll give you a better idea when we quote.
How do I get a quote for floor joint sealing in Brattle?
Every job is different, so each one gets its own quote. To get one, ring 0345 464 0079 or send us an email and tell us what needs doing and where.
When can I walk on the floor?
That varies with the sealant and the room. Before we leave, we tell you when it can be walked on, mopped and driven over so you can plan.
Do you work on commercial floors?
Yes. We clean out the joints and reseal them with a product suited to the floor. Tell us what runs over the floor when you ask for a quote.
Why deal with it now?
Dirt builds up in open joints and makes the floor look worn. A neat sealed joint is easier to clean. Where a wall is exposed, as many are in small places like Brattle, wind-driven rain gets into any failed joint, and damp in older walls is slow to dry out.
The cost reflects the work involved, not a rough estimate. That is why we ask about the job first.
Why book with us
- Over 20 years’ experience
- Any old sealant cut out fully, not covered over
- A 12-month guarantee on all work
- Sanitary silicone with an anti-fungal additive in wet areas
Read what affects the cost or what customers say.
Can I do it myself?
If you’ve already had a go yourself, that is fine. We cut it out and start again, so tell us about it when you ask for a quote.
If you do try it yourself, take your time over the preparation: remove every trace of old sealant, clean and dry the joint, and follow the product’s cure time. If it does not work out, we can still put it right.
How to look after the new joints
A little care helps the new joints last. Our advice:
- Use furniture pads near skirting
- Look at floor joints each spring
- Do not paint over silicone
- Get cracks along tile grout lines looked at early
Avoid flooding the floor when you clean. Keeping the edges drier helps the sealant last longer.
Once concrete joint edges start to break, wheels make it worse. Early resealing helps keep the joint intact and the floor safer.
The process
Once we’re on site, we check the joints match what you told us. If we find something unexpected, we talk it through with you first. Most jobs then take a few hours, depending on the length of joint. Somewhere as small as Brattle, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.
- We start by checking the floor, the joint and what traffic it takes.
- Any old caulk, grout or sealant is raked or cut out.
- We vacuum out the joint and add backing where the depth needs setting.
- We apply the sealant in a colour that suits the floor.
- The joint is tooled neatly and the cure time explained.
Before we arrive
- Let us know about parking restrictions
- Clear items away from the joints we’re working on
- Let us know about stairs, lifts or work at height
How to get a quote
The more we know about the job, the more useful the quote. Let us know the location, the problem and roughly how many joints, and add pictures by email if you can.
Related advice
What floor joint sealing looks like in Brattle
Floors around Kent run from suspended timber in older homes to concrete in newer houses and units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.
Letting a property close to Appledore (Kent) station? Then gaps at skirtings and thresholds are worth sealing between tenancies. Community buildings like Parish Church of All Saints are part of the picture too: joints in its floors, skirtings and thresholds need resealing as they wear.
Brattle is about 6 miles south-west of Ashford, in Kent. If you need floor joint sealing in Brattle, it’s easy to get a quote: please phone 0345 464 0079 or email us. We cover Kent from our Crawley base. Across Kent, we cover 922 places, Brattle among them. Our Crawley page covers work nearby (42 miles or so).
Every address in TN26 is within our area for floor joint sealing. We cover properties on Front Road, Lower Road and Appledore Road. We also cover Woodchurch (1 mile north), Brook Street (1 mile west), Shirkoak (1 mile north), Appledore Heath (2 miles south) and Reading Street (3 miles south-west). We also work in nearby towns such as Ashford (6 miles north-east), Hythe (13 miles east), Tenterden (4 miles west), Park Wood (15 miles north-west), Kennington (8 miles north-east) and New Romney (9 miles south-east).
Landmarks near Brattle
Around Brattle, our work takes us to homes and buildings near Stonebridge Inn, among other places. The closest station to Brattle is Appledore (Kent) station, roughly 3.1 miles south-east. Other landmarks nearby include Woodchurch Village Life Museum (1 mile north-west). Green spaces nearby include Orlestone Forest.