East Sussex · England

Floor Joint Sealing in Battle

Floor joint sealing for Battle and the surrounding area: careful preparation, the right product and tidy work. Call for a quick quote.

  • Open joints that fill with dirt
  • Grout cracking in a straight line across a floor
  • Grout used at the floor edge instead of sealant

Floor joint sealing for Battle homes and businesses

Floor joint sealing in Battle, done properly

Concrete floors in warehouses and units have joints that take heavy wear. We reseal them with a product chosen for the movement and the traffic. We work on tiled floors, commercial floors and skirting boards, and common reasons people get in touch are failed seals where bathroom floors meet baths and panels and concrete floor joints that have broken down.

In smaller places like Battle, new homes tend to come as small developments or single plots. The sealant around baths, showers, frames and skirtings needs to be right from the start.

All our work is covered by a one-year guarantee, wherever you are in East Sussex.

Mr Mastic applicators lined up beside the company vans, one holding a sealant gun
Location
Battle (TN33)
Region
East Sussex
Guarantee
One year on every job
Price
A clear price before work begins
Call
0345 464 0079
Last updated
26 October 2026

Joints and finishes in Battle homes

Floors around East Sussex run from suspended timber in older homes to concrete in newer houses and units, and they don’t all move the same way. That is why the skirting and threshold joints need a flexible seal.

For site and facilities teams at buildings such as Battle and Langton Church of England Primary School, floor and threshold joints in busy corridors wear quickly and are best resealed early. Rented homes near Battle station change hands often, and gaps at skirtings and thresholds are worth sealing between tenancies.

Battle is about 5 miles north of Bexhill-on-Sea, in East Sussex. From the centre of Battle to the outskirts, floor joint sealing is available for homes and businesses alike. 289 places in East Sussex are on our list, large and small. For nearby work, see our Brighton page.

All of TN33 is within our area for floor joint sealing, from the main roads to the quietest streets. Streets in the area include High Street, Market Road and Station Road, all of which we cover. Battle is on the A271 and A2100, which makes it straightforward to reach. Nearby, we also carry out floor joint sealing in Steven's Crouch (2 miles west), Netherfield (2 miles north-west), Mountfield (2 miles north), John's Cross (3 miles north) and Penhurst (3 miles west). We also work in nearby towns such as Eastbourne (12 miles south-west), Hastings (5 miles south-east), Bexhill-on-Sea (5 miles south), Hailsham (11 miles west), St Leonards (5 miles south-east) and Polegate (12 miles south-west).

Near you in Battle

Around Battle, our work takes us to homes and buildings near Claverham Community College and The Abbey Hotel, among other places. For rail, the closest station is Battle station, roughly 0.6 miles south-east of the centre. A little further out are Battle Museum of Local History (less than half a mile north) and Conquest Hospital (4.3 miles south-east). Open spaces near Battle include Church Wood and Robsack Wood and Senlac Hill.

Map of Battle © OpenStreetMap contributors

How the visit works

At the end, we look at the finished work together and explain the cure time. The work normally takes a few hours for most rooms, longer for large commercial floors, depending on the size of the job. For a job in Battle, we agree the time, the access and parking before the day. Outdoor jobs depend on a dry day, since sealant needs a dry surface.

  1. We look at the gap and the floor type and agree the right sealant.
  2. Old caulk, grout or sealant is removed from the joint.
  3. The joint is cleaned, vacuumed and backed where depth needs controlling.
  4. A flexible sealant, or a floor-joint sealant for concrete, is applied in a colour to suit.
  5. We tool the joint neatly and tell you when it can be walked on and cleaned.

How to prepare

  • Let us know about stairs, lifts or work at height
  • On commercial sites, let us know about site rules
  • Keep pets and children clear of the area while we work

How to get a quote

Every job is quoted individually, so the first step is telling us about yours. Simply call 0345 464 0079 or send us an email and describe the job and send photos if you have them.

Ask for a quote

Advice

How to look after the new joints

Good habits help new joints last longer. Our tips:

  • Act on grout cracks that run in a straight line
  • Keep caulk for dry, still joints only
  • Walk round the room once a year and look at the edges
  • Sweep along the edges of the floor

Keep off the joint for the time we give you. Light foot traffic is normally fine sooner than wet cleaning or wheels so we will give you each time.

Sealing a gap while it’s small is a quick job. Ignored, they fill with dirt and open further and are harder to clean out.

DIY versus a professional finish

Too much sealant is as bad as too little. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

Some jobs are best left to a professional: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

What happens if it’s left?

Water that gets past a floor joint can damage the floor beneath. Sealing them now keeps the problem at the surface. Homes in smaller places like Battle can face more weather, and failed outside joints let damp into walls. Indoors, a failed seal lets water into floors and panels as it would anywhere.

What it costs depends on the size of the job, how much old material has to come out and access to the work. You will have a clear quote before any work starts, so you know where you stand.

Why us?

  • Colour agreed with you before we start
  • Over 20 years’ experience
  • Colour picked to suit the job
  • Anti-fungal silicone where joints get wet

Read how sealant jobs are priced or what customers say.

Common problems we fix in Battle

Caulk is the usual filler for skirting. In a joint that moves or gets wet, it splits so the gap reappears.

Most people get in touch after spotting one of these:

  • Gaps between floors and kitchen plinths
  • Threshold joints that have opened or worn
  • Floor edges that trap water and grime
  • Cracked caulk along skirting in bathrooms and kitchens

For buildings such as The Parish Church of St Mary, joints in its floors, skirtings and thresholds need resealing as they wear.

Comparing quotes

  • Is the old sealant removed completely?
  • The length of the guarantee
  • What insurance they hold
  • What product goes in the joint

How to choose a mastic man

Landlords, agents and businesses in Battle

Failed sealant is one of the commonest items on a check-out report, and it’s quick to put right between tenancies. We can quote for more than one property at once.

Landlords and letting agents in Battle can book us as well as homeowners. Sealant work between tenants keeps a property looking cared for.

Battle: your questions answered

Can you do floor joint sealing in Battle?

Yes, Battle is within the area we cover. We work across London and the South East. You can ring 0345 464 0079 or drop us an email and let us know what needs doing, and we will give you a clear quote.

Will you come out to Battle?

Yes, smaller places are covered as well as towns. We work across London and the South East. Just mention lanes, gates or anything else about the route when you book.

Where are you based?

Our base is in Crawley, and we work across South East England, London and Scotland.

Can sealant along the skirting be painted?

Where the skirting will be painted, we can use a flexible sealant that takes paint. Silicone will not take paint, so it’s kept for wet areas and unpainted joints.

Do you hold any approvals?

Yes. We are ARBOMaster approved, the scheme for applicators of Arbo sealants.

Why does the gap under my skirting keep coming back?

Timber floors and skirting shrink and swell through the year. We close it with a flexible sealant that moves with the floor.

Do you work on commercial floors?

Yes. Old filler is cleaned out and the joint resealed with a floor-joint product. Tell us what runs over the floor and we’ll quote.

How long does floor joint sealing take?

Most jobs take a few hours for most rooms, longer for large commercial floors, including the preparation. We will confirm how long when we quote.

What affects the cost of floor joint sealing

There’s no set price list. What we look at:

  • Whether there’s mould to deal with
  • The product the joint needs
  • The old material and how stubborn it is
  • The number of rooms or windows

There are no prices on our website, because each job is priced on what it involves. For a quick quote, please phone 0345 464 0079 or email us and we’ll talk you through it.

What to tell us for a quote

When you contact us, it’s useful to know:

  • If it’s domestic, commercial or a hotel
  • Where the job is, and your postcode
  • Access, such as stairs, a lift or height
  • How many joints, rooms or windows are involved

We don’t publish a price list, as no two jobs are quite the same. Instead, we send you a clear quote for your job. To arrange one, phone 0345 464 0079 or email us.

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job