Hampshire · England

Bar End Floor Joint Sealing

Sealing skirting-to-floor joints, tiled floor movement joints and concrete floor joints for homes and businesses in Bar End and across Hampshire. ARBOMaster approved applicators, fully insured, with a one-year guarantee.

  • Grout cracking in a straight line across a floor
  • Open gaps along the bottom of skirting boards
  • Rigid edge joints in tiled floors

Trusted floor joint sealing in Bar End

Floor joint sealing in Bar End

Tiled floors can crack along the grout when there’s no room for movement. We can turn a line of grout into a movement joint by replacing it with flexible sealant. We work on tiled floors, wet room & bathroom floors and commercial floors, and people most often call us about perimeter joints in tiled floors filled with grout and open joints that fill with dirt.

For a small place like Bar End, the journey and access are planned in advance, and the work itself is the same as on any site.

You get a 12-month guarantee, the same in Bar End as everywhere else we work.

Eleven members of the Mr Mastic team standing in front of branded white vans
Location
Bar End (SO23, SO21)
Region
Hampshire
Cover
A year, on every job
Quote
A clear quote up front
Phone
0345 464 0079
Page updated
26 October 2026

What the job involves on each surface

Commercial floors

Shops, offices, warehouses and units all have floor joints that need sealing. The sealant is chosen for the traffic the floor takes.

Thresholds

Where a tiled floor meets timber or carpet, the joint takes movement from both sides. A flexible sealant bridges them.

Can I do it myself?

Not every job suits DIY: work at height, external movement joints, fire-rated sealant and large areas call for the right materials, safe access and experience.

Overfilling a joint is a classic DIY mistake. A heavy bead looks messy and copes badly with movement, and getting the depth right matters as much as the look.

Quotes for floor joint sealing in Bar End

For a quick quote, just ask. The main things that affect it are:

  • How much there is to do
  • How much old sealant there is and how hard it is to remove
  • When we can work, for business premises
  • Whether the work is at height

A failed joint rarely gets cheaper to fix by waiting, as water and mould keep getting in. If you’re unsure, phone 0345 464 0079 or email us and we will give you an honest view and a quote.

What to tell us for a quote

Photos by email are helpful but not essential. Please mention:

  • Whether it has been sealed before
  • Photos by email, if that’s easy
  • The problem you’ve noticed
  • How we’d reach the joints

For floor joint sealing in Bar End, phone 0345 464 0079 or drop us an email. Tell us what the problem is and where, and you’ll get a clear quote before we start.

Joints and finishes in Bar End homes

Across Hampshire, floors range from older suspended timber floors to concrete slabs in newer homes and commercial units, and each moves in its own way. That’s why the skirting and threshold joints need a flexible seal.

Managing a site like All Saints Church of England Primary School? Then floor and threshold joints in busy corridors wear quickly and are best resealed early. For buildings such as All Saints, joints in its floors, skirtings and thresholds need resealing as they wear.

Bar End is about 1 mile south-east of Winchester, in Hampshire. Whether you are in the middle of Bar End or further out, floor joint sealing is available for homes and businesses alike. Bar End is one of 683 places in Hampshire we cover. For nearby work, see our Southampton page, about 10 miles away.

Here we cover the SO23 and SO21 postcode area for floor joint sealing. Local streets include Vale Road, Domum Road and Portal Road, all of which we cover. You’ll find Bar End on the A31, so it’s easy for us to get to. Other places close to Bar End include Highcliffe (1 mile north-east), Winchester (1 mile north-west), St Cross (1 mile west), Hyde (1 mile north) and Stanmore (1 mile west). Further out, we also cover Eastleigh (6 miles south), Fareham (15 miles south), Andover (13 miles north-west), Totton (13 miles south-west), Chandler's Ford (6 miles south-west) and Hedge End (10 miles south).

Near you in Bar End

Typical jobs here are in homes near Leigh House Hospital, St. Cross Park and Heart in Hand pub and the streets around them. The closest station to Bar End is Winchester station, about 1.2 miles north-west. A little further out are St John's Rooms And Chapel (0.6 miles north) and Wolvesey Castle (under half a mile north-west). Not far away are Twyford Down and Winnall Moors.

Map of Bar End © OpenStreetMap contributors

Bar End: your questions answered

Do you work for landlords with property near Winchester station?

Yes, landlords and agents are among the people we work for. You can call 0345 464 0079 or email us with the details for a clear quote.

Is Bar End within the area you cover?

Yes, Bar End is covered. Our work covers London and the South East, from towns to the smallest places. The journey is planned ahead, so it helps to know about access.

Is it OK to seal over old sealant?

No. New silicone won’t bond to old silicone, and it traps any mould or water underneath. We remove it all first.

Can grout be replaced with sealant on a tiled floor?

In many cases, yes. Where a floor needs one, we rake out grout along the right line and replace it with flexible sealant in a matching colour. Loose or cracked tiles need a tiler first.

How long does the job take?

A typical job takes a few hours, depending on the length of joint, including the preparation. Your quote will say how long we expect yours to take.

Where is Mr Mastic based?

Our base is Crawley, with over 20 years’ experience. Our area covers South East England, London and Scotland.

Will it make a mess?

No. We protect the surfaces around the joints, and we tidy up before we go.

Do the sealants smell?

Sometimes, a little. It fades as the sealant cures.

Honest limits

To be straight with you, some problems need a different trade:

  • Cracked or broken concrete slabs
  • Large cracks that need a surveyor
  • Floors that are uneven or need levelling

If you are not sure, just phone 0345 464 0079 or drop us an email and we’ll give you a straight answer.

Where we work in Bar End

  • Wet room & bathroom floors
  • Tiled floors
  • Concrete floor joints
  • Commercial floors
  • Skirting boards
  • Thresholds

Why it’s worth doing now in Bar End

Dirt builds up in open joints, and they look untidy. A neat sealed joint is easier to clean. Older cottages and farmhouses around Bar End can have timber floors and frames, where water from a failed joint can cause rot if it’s left.

The cost reflects the work involved, not a rough estimate. That is why we ask about the job first and give you a clear price before we start.

Why Bar End customers choose us

  • ARBOMaster approved applicator
  • 4.9 on Google from 180+ five-star reviews
  • Anti-fungal sanitary silicone in wet areas
  • Fully insured

Take a look at how sealant jobs are priced and what customers say.

Do you need floor joint sealing in Bar End?

An open floor joint fills with dirt and water. In kitchens and bathrooms, mop water gets into the gap and can reach the subfloor.

Any of these means the joints need attention:

  • Failed seals where bathroom floors meet baths and panels
  • Grout cracking in a straight line across a floor
  • Grout used at the floor edge instead of sealant
  • Cracked caulk along skirting in bathrooms and kitchens

If you let a flat or house near Winchester station, gaps at skirtings and thresholds are worth sealing between tenancies.

What to look for in a quote

  • Whether all the old sealant comes out first
  • How long to leave it before use
  • What product goes in the joint
  • Whether they’re fully insured

Our hiring checklist

What happens on the day

Our applicators work methodically: protect, prepare, seal, tidy. For most jobs that takes a few hours for most rooms, longer for large commercial floors and we leave things clean and tidy. Somewhere as small as Bar End, access is often the only tricky part. For outside work, also let us know about exposed walls and any outbuildings involved.

  1. First, the floor type, the gap and the traffic are checked.
  2. Any old caulk, grout or sealant is raked or cut out.
  3. The joint is vacuumed clean and backing fitted where needed.
  4. The chosen sealant goes in, coloured to suit the floor.
  5. We tool it neatly and tell you when it can be walked on and cleaned.

How to prepare

  • Let us know if you’ve seen damp or leaks
  • Let us know about stairs, lifts or work at height
  • Keep pets and children clear of the area while we work

Get a quote

To get a quote, phone 0345 464 0079 or send us an email with the location and a short description of the problem. You’ll have a clear quote before any work starts.

Ask for a quote

Advice

20+ yearsMastic and sealant specialists
ARBOMaster approvedApproved applicator for Arbo sealants
Fully insuredDomestic, commercial and hotels
One-year guaranteeOn every job